Welcome
Thank you for choosing the Lewmar Venta Pontoon Anchor Winch Standard Kit. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new anchor winch system. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your product.
Important Safety Information
Always prioritize safety when installing and operating marine equipment. Failure to follow these instructions could result in injury or damage to the product or vessel.
- Ensure all electrical connections are made by a qualified marine electrician and comply with local regulations.
- Always disconnect power to the winch before performing any maintenance or inspection.
- Keep hands and loose clothing clear of moving parts, especially the rope and chain during operation.
- Do not exceed the maximum pull capacity of 220 lb.
- Ensure the anchor is properly secured when not in use to prevent accidental deployment or damage.
- This winch is designed for use with plow-style anchors. Using incompatible anchors may lead to malfunction or damage.
- Regularly inspect the rope, chain, and all components for wear or damage. Replace worn parts immediately.
Product Overview
The Lewmar Venta Pontoon Anchor Winch Kit is designed for underdeck anchoring on pontoon boats, providing a clean and safe deck space. It features an IP66 rated motor for durability in marine environments and a convenient foot switch for easy operation.
Key Features
- Underdeck anchor deployment and retrieval designed specifically for pontoons.
- IP66 rated 850w motor and electronics are sealed off from the elements.
- Accommodates plow-style anchors for better holding power.
- Durable Delrin® rollers for reliable anchor retrieval.
- Multi-hole installation options for easy underdeck mounting.
- Slackline sensor cutoff switch for added safety.
Included Components
- Lewmar Venta Pontoon Winch Unit
- Fixed Bow Roller
- 92' (28m) of 3-strand rope
- 6' (1.8m) of setting chain
- Foot Switch
Product Components
Figure 1: Lewmar Venta Pontoon Anchor Winch and Fixed Bow Roller.
Technical Specifications
| Specification | Value |
|---|---|
| Model Name | Lewmar Venta Pontoon Anchor Winch Standard Kit |
| Part Number | 2024008888 |
| Motor Power | 850w |
| Voltage | 12V |
| Maximum Pull | 220 lb (99.8 kg) |
| Ground Tackle Capacity | 88 lb (39.9 kg) |
| Rope Length | 92' (28m) 3-strand |
| Chain Length | 6' (1.8m) |
| IP Rating | IP66 |
| Color | Silver |
| Item Package Dimensions (L x W x H) | 30 x 19 x 18.5 inches (76.2 x 48.3 x 47 cm) |
| Package Weight | 28.99 Kilograms (63.99 lb) |
Approximate Dimensions of Fixed Bow Roller
Figure 2: Approximate dimensions of the Fixed Bow Roller.
Setup and Installation
Proper installation is crucial for the performance and safety of your Lewmar Venta Anchor Winch. It is recommended that installation be performed by a qualified marine technician.
Pre-Installation Checklist
- Ensure you have all included components and any necessary tools.
- Acquire a compatible plow-style anchor (sold separately). Recommended Lewmar Epsilon (2020221486) or Delta (2020202223) anchors.
- Verify adequate space under the pontoon deck for the winch unit and bow roller.
- Confirm your boat's electrical system can support a 12V, 850w motor.
- Consider using the optional universal aluminum mounting plate (2023011357) for easier installation.
Installation Steps
- Mounting the Winch Unit: Position the winch unit securely under the pontoon deck. The multi-hole design of the mounting bracket allows for flexible installation. Ensure the unit is level and aligned with the bow roller.
- Installing the Fixed Bow Roller: Attach the fixed bow roller to the bow of your pontoon, ensuring it is robustly secured and aligned with the winch unit for smooth rope and chain passage. The stainless steel construction and durable Delrin® rollers are designed for longevity.
- Electrical Connections: Connect the winch to your boat's 12V power supply. Ensure all wiring is properly sized, fused, and waterproofed according to marine standards. Connect the foot switch as per the wiring diagram (not provided in this manual, refer to full installation guide).
- Rope and Chain Installation: Feed the 6' setting chain through the bow roller, followed by the 92' 3-strand rope. Securely attach your plow-style anchor to the end of the chain.
- Optional Mounting Plate: If using, install the universal aluminum mounting plate (sold separately) first, then mount the winch unit to the plate. This can simplify the installation process.
Figure 3: Underdeck installation of the winch unit.
Figure 4: Fixed Bow Roller features and mounting points.
Figure 5: Winch unit showing IP66 rated motor and underdeck design.
Figure 6: Recommended compatible anchors (sold separately).
Figure 7: Optional universal aluminum mounting plate.
Operating Instructions
The Lewmar Venta Winch is designed for easy and convenient anchor deployment and retrieval using the included foot switch.
Deploying the Anchor
- Ensure the area around the bow is clear and safe for anchor deployment.
- Press and hold the 'DOWN' side of the foot switch. The winch will begin to pay out the rope and chain, deploying the anchor.
- Release the foot switch once the desired amount of rode has been deployed, or when the anchor has set.
Figure 8: Foot switch for anchor control.
Retrieving the Anchor
- Ensure the path of the rope and chain is clear.
- Press and hold the 'UP' side of the foot switch. The winch will begin to retrieve the rope and chain, pulling the anchor back towards the bow.
- Release the foot switch once the anchor is fully retrieved and secured in its stowed position. The durable Delrin® rollers on the bow roller ensure smooth retrieval.
Figure 9: Delrin® rollers on the Fixed Bow Roller.
Safety During Operation
The underdeck design of the Venta winch helps keep your pontoon deck clear of slippery mud and tripping hazards, enhancing safety during anchoring operations.
Figure 10: Clear deck space due to underdeck installation.
Maintenance
Regular maintenance will ensure the longevity and reliable operation of your Lewmar Venta Anchor Winch.
- Routine Inspection: Periodically inspect the winch unit, bow roller, rope, and chain for any signs of wear, corrosion, or damage. Pay close attention to the condition of the rope and chain for fraying or kinks.
- Cleaning: After each use, especially in saltwater, rinse the bow roller and any exposed parts of the winch with fresh water to remove salt and debris. Avoid using harsh chemicals.
- Electrical Connections: Annually check all electrical connections for corrosion and tightness. Apply dielectric grease to terminals to prevent corrosion.
- Rope and Chain Management: Ensure the rope and chain are stored neatly within the winch system to prevent tangles and snags.
- Professional Service: For any complex issues or internal component inspection, it is recommended to seek service from an authorized Lewmar service center.
Troubleshooting
This section provides solutions to common issues you might encounter with your Lewmar Venta Anchor Winch.
| Problem | Possible Cause | Solution |
|---|---|---|
| Winch does not operate | No power supply Blown fuse/tripped breaker Faulty foot switch Loose electrical connection | Check battery connections and charge Inspect and replace fuse or reset breaker Test foot switch for continuity Tighten all electrical connections |
| Winch operates slowly or weakly | Low battery voltage Corroded electrical connections Overload/excessive weight | Check battery voltage and charge Clean and secure all electrical connections Reduce load; ensure anchor is not snagged |
| Rope/chain jams or tangles | Improper rope/chain storage Debris in the system Worn or damaged rope/chain | Ensure rope/chain is neatly spooled Inspect and clear any obstructions Replace worn rope or chain |
| Anchor does not deploy/retrieve smoothly | Bow roller obstruction Damaged Delrin® rollers Anchor snagged | Clear any debris from the bow roller Inspect and replace damaged rollers Maneuver boat to free anchor |
Warranty Information
The Lewmar Venta Pontoon Anchor Winch Kit is covered by a comprehensive warranty:
- Hardware: 3-year warranty from the date of purchase.
- Electronics: 1-year warranty from the date of purchase.
This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, neglect, accident, or unauthorized repairs. Please retain your proof of purchase for warranty claims.
Customer Support
For technical assistance, spare parts, or warranty claims, please contact Lewmar Customer Support. Visit the official Lewmar website for the most up-to-date contact information and support resources.
Lewmar Official Website: www.lewmar.com
Lewmar is committed to providing innovative, top-tier control solutions globally. Your satisfaction is our priority.
