AVENLI 3-5 Person Inflatable Hot Tub Spa User Manual

Introduction

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your AVENLI 3-5 Person Inflatable Hot Tub Spa. Please read all instructions carefully before installation and use to ensure proper function and longevity of your product.

The AVENLI Inflatable Hot Tub Spa offers a relaxing experience with its 120 air jets, heating capability up to 104°F, and a spacious 211-gallon capacity. Its octagon design is suitable for 3 to 5 individuals.

Safety Guidelines

Your safety is paramount. Adhere to all safety warnings and instructions to prevent injury or damage.

• Always supervise children in and around the hot tub.
• Do not operate the hot tub if the water temperature exceeds 104°F (40°C).
• Ensure the RCD/GFCI circuit breaker is tested before each use.
• Do not use electrical appliances near the hot tub.
• Always use the lockable cover when the hot tub is not in use to prevent accidental access and heat loss.

Image: Diagram illustrating the 5-layer protection system of the hot tub, including double insulation, overheating protection, RCD/GFCI circuit breaker, control panel lock, and triple backflow-proof protection.

Image: The AVENLI hot tub with its grey, octagon-shaped lockable cover securely fastened, demonstrating its safety feature.

Setup and Installation

Follow these steps for proper setup of your inflatable hot tub.

1. Unpacking and Site Selection

Carefully remove all components from the packaging. Select a flat, stable, and level surface capable of supporting the weight of the filled hot tub (approximately 211 gallons of water plus occupants). Ensure the location is near a suitable power outlet.

2. Component Check

Verify all parts are present as per the 'Complete Hardware Included' diagram.

Image: A layout of all included hardware components: inflating hose, caps, pump unit, GFCI plug, filter cartridge holder, spa liner, repair patch, pump unit connectors, airflow valve, base protector, filter cartridge, and top cover.

3. Inflation

Connect the inflating hose to the pump unit and the hot tub's inflation valve. Use the pump unit to inflate the hot tub until it is firm to the touch but not over-inflated. Do not use an air compressor.

4. Connecting the Pump Unit

Attach the pump unit to the hot tub's inlet and outlet connections using the provided connectors. Ensure all connections are secure and watertight.

5. Filling the Spa

Fill the hot tub with water using a garden hose. Fill to the indicated maximum fill line. Do not overfill.

Image: A three-panel image showing the easy installation process: a person connecting the pump unit to the hot tub, a person carrying the pump unit, and a person filling the hot tub with water.

Operation

Familiarize yourself with the digital control panel for optimal use of your hot tub.

1. Digital Control Panel Overview

The control panel allows you to adjust temperature, activate the heating system, and control the air jets and filtration.

Image: A close-up of the AVENLI digital control panel, showing buttons for temperature adjustment, heating, air jets, filtration, and a lock function, with a digital display showing 40°C.

2. Heating the Water

Press the 'Heat' button on the control panel. Use the temperature adjustment buttons to set your desired water temperature, up to 104°F (40°C). The heating system will automatically turn off once the set temperature is reached.

3. Activating Air Jets

Press the 'Bubble' button to activate the 120 invigorating air jets. Press again to turn them off. The air jets provide a soothing massage experience.

Maintenance

Regular maintenance ensures the longevity and hygiene of your hot tub.

1. Water Filtration

The hot tub features a filtration system with 150 filter pleats to keep the water clean. Regularly check and clean the filter cartridges. Replace them every few weeks, depending on usage, to maintain optimal filtration performance.

Image: Two white filter cartridges with blue tops, designed for the hot tub's filtration system.

2. Cleaning the Spa

Periodically clean the interior and exterior of the hot tub with a mild detergent and soft cloth. Rinse thoroughly. Do not use abrasive cleaners.

3. Draining and Storage

When not in use for extended periods, or for seasonal storage, drain the hot tub completely. Use the easy drain valve for efficient water removal. Ensure the hot tub is thoroughly dry before folding and storing in a cool, dry place.

Image: A composite image showing four key features: a person enjoying the air jet massage, a close-up of the lockable cover buckle, a person folding the hot tub for storage, and a close-up of the easy drain valve.

Troubleshooting

Refer to this table for common issues and their solutions.

Technical Specifications

Detailed specifications for your AVENLI Inflatable Hot Tub Spa.

Image: A top-down view of the hot tub with dimensions labeled: 76.8" (195cm) outer diameter, 60.6" (154cm) inner diameter, and 27.6" (70cm) height, indicating it seats 3-5 people and has an 800L water capacity.

Warranty Information

Please refer to the warranty card included with your product for specific warranty terms and conditions. Typically, a limited warranty covers manufacturing defects for a specified period from the date of purchase. Keep your proof of purchase for warranty claims.

Customer Support

For further assistance, technical support, or to inquire about replacement parts, please contact AVENLI customer service. Contact information can typically be found on the product packaging or the manufacturer's official website.

When contacting support, please have your product model number (17654USV32DQ) and proof of purchase readily available.