Emerson SH1501 1500W Electric Space Heater User Manual

1. Important Safety Instructions

Please read all instructions carefully before using this heater and retain for future reference. Failure to follow these instructions may result in fire, electric shock, or injury.

• Electrical Safety: Ensure the heater is plugged into a 120V, 60Hz, 1500-Watt grounded outlet. Do not use with extension cords or power strips.
• Placement: Always place the heater on a firm, level surface. Keep combustible materials such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 meters) from the front, top, sides, and rear of the heater.
• Overheat Protection: The heater is equipped with an automatic overheat protection sensor. If the heater overheats, it will automatically shut off. Unplug the heater, allow it to cool for 10 minutes, then plug it back in.
• Tip-Over Protection: A smart tip-over switch automatically turns off the heater if it is accidentally tipped over. Place the heater upright on a stable surface to resume operation.
• Ventilation: Do not block air intakes or exhaust openings. Do not use in wet or moist locations like bathrooms.
• Supervision: Close supervision is necessary when any appliance is used by or near children or individuals with reduced physical, sensory, or mental capabilities.
• Maintenance: Always unplug the heater before cleaning or performing any maintenance.

Image: The Emerson SH1501 heater highlighting its ETL certification, overheat protection, and tip-over protection features, with a dog in the background, indicating safe use around pets.

2. Product Overview

The Emerson SH1501 is a portable 1500W electric space heater designed for indoor use. It features PTC ceramic heating technology for fast and even heat distribution, along with multiple heat settings and a fan-only mode for year-round comfort.

Key Features:

• PTC Ceramic Heating: Provides efficient and rapid heating.
• Three Heat Levels: Level-1 (700W), Level-2 (900W), Level-3 (1500W).
• Fan-Only Mode: For air circulation without heat.
• Adjustable Thermostat: For precise temperature control.
• Safety Features: Automatic tip-over shut-off and overheat protection.
• Portable Design: Compact with a built-in carry handle.

Product Components:

1. Heat/Fan Mode Selector Dial
2. Adjustable Thermostat Dial
3. Power Indicator Light
4. Front Grill (Heat Outlet)
5. Rear Air Intake
6. Carry Handle

Image: Front view of the Emerson SH1501 Electric Space Heater, showing the control dials and front grill.

Image: Side view of the Emerson SH1501 Electric Space Heater, showing its compact profile.

Image: Back view of the Emerson SH1501 Electric Space Heater, showing the air intake and power cord.

3. Setup and Placement

Proper setup ensures optimal performance and safety.

1. Unpacking: Carefully remove the heater from its packaging. Retain packaging for storage if desired.
2. Placement: Place the heater on a stable, level, heat-resistant surface. Ensure there is at least 3 feet (0.9 meters) of clear space around the heater from any walls, furniture, or other objects. Do not place it directly under a power outlet.
3. Power Connection: Plug the heater directly into a standard 120V AC, 60Hz wall outlet. Do not use extension cords, power strips, or surge protectors.

Image: The Emerson SH1501 heater positioned on a nightstand in a bedroom, illustrating suitable placement for localized heating.

4. Operating Instructions

Follow these steps to operate your Emerson SH1501 space heater.

1. Power On: Ensure the heater is plugged in. The power indicator light will illuminate.
2. Select Mode: Turn the Heat/Fan Mode Selector Dial (typically on the right) to your desired setting:
   • Fan Only: For air circulation without heat.
   • Level-1 (700W): Low heat setting.
   • Level-2 (900W): Medium heat setting.
   • Level-3 (1500W): High heat setting.
3. Set Thermostat: Turn the Adjustable Thermostat Dial (typically on the left) to the MAX position. Once the room reaches your desired temperature, slowly turn the thermostat dial counter-clockwise until the heater turns off. The heater will now cycle on and off to maintain this temperature.
4. Power Off: To turn off the heater, turn the Heat/Fan Mode Selector Dial to the "OFF" position. Unplug the heater from the wall outlet when not in use.

Image: Diagram illustrating the four operating modes of the Emerson SH1501 heater: 700W (Low Heat), 900W (Middle Heat), 1500W (High Heat), and Fan Only.

Image: The Emerson SH1501 heater actively emitting warm air, demonstrating its heating function.

5. Maintenance and Storage

Regular maintenance ensures the longevity and efficient operation of your heater.

Cleaning:

• Always unplug the heater and allow it to cool completely before cleaning.
• Use a soft, damp cloth to wipe the exterior surfaces of the heater. Do not use abrasive cleaners or solvents.
• Use a vacuum cleaner with a brush attachment to gently clean dust from the air intake and exhaust grilles.
• Never immerse the heater in water or allow water to drip into the interior.

Storage:

• When not in use, store the heater in its original packaging in a cool, dry place.
• Avoid storing in areas where it may be exposed to excessive dust or moisture.

6. Troubleshooting Guide

If your heater is not operating correctly, consult the following common issues and solutions.

If the problem persists after trying these solutions, please contact Emerson customer support.

7. Specifications

Image: The Emerson SH1501 heater with its dimensions clearly marked, showing its compact size.

8. Warranty and Support

For warranty information or technical support, please refer to the warranty card included with your product or visit the official Emerson website. Keep your purchase receipt as proof of purchase.

Contact Information: Please refer to the product packaging or the Emerson official website for the most current customer support contact details.