AVENLI 4-6 Person Inflatable Hot Tub Spa User Manual

Introduction

This manual provides detailed instructions for the safe and efficient use of your AVENLI 4-6 Person Inflatable Hot Tub Spa. Please read all instructions carefully before installation and use. Proper setup, operation, and maintenance are crucial for ensuring the longevity and safe enjoyment of your spa.

The AVENLI 4-6 Person Inflatable Hot Tub Spa, featuring a stylish brick pattern exterior and integrated control unit.

Key Features:

• Comfortably accommodates 4-6 people with a 264-gallon water capacity.
• Equipped with 140 water jets for a relaxing massage experience.
• Heating system warms water up to 104°F (40°C) with an integrated digital control panel.
• Features overheating protection, RCD/GFCI (4-6mA) circuit breaker, and a lockable cover for enhanced safety.
• Double insulation design for effective heat retention and a foldable, compact design for easy storage.

Setup Instructions

Follow these steps for proper installation of your inflatable hot tub spa.

1. Unpacking and Site Selection:

• Carefully unpack all components and check against the hardware list.
• Select a flat, level surface free from sharp objects. Ensure the location can support the weight of the filled spa (approximately 2,200 lbs / 1000 kg).
• Ensure the location is near a suitable power outlet with RCD/GFCI protection.

All hardware components included with the AVENLI Inflatable Hot Tub Spa.

2. Inflation:

• Lay out the spa liner on the chosen site.
• Connect the inflation hose to the spa's air valve and the pump unit.
• Inflate the spa until it is firm to the touch but not over-inflated. Do not use an air compressor.

3. Pump Unit Connection:

• Connect the pump unit to the spa's inlet and outlet valves using the provided connectors. Ensure all connections are secure to prevent leaks.

Steps for easy installation, including connecting the pump and filling the spa.

4. Filling the Spa:

• Fill the spa with water using a garden hose until the water level is between the minimum and maximum fill lines indicated on the spa wall.
• Do not overfill.

Operating Instructions

Familiarize yourself with the digital control panel to operate your spa's functions.

The digital control panel for easy settings adjustment.

1. Digital Control Panel:

The integrated digital control panel allows you to manage all spa functions with ease.

• Power Button: Turns the spa system on/off.
• Temperature Adjustment: Use the up/down arrows to set your desired water temperature (up to 104°F / 40°C).
• Heating Function: Activate the heating system. The indicator light will show when heating is active.
• Jet Function: Activates the 140 air jets for a bubbling massage. Press again to turn off.
• Filter Function: Activates the filtration system. It is recommended to run the filter daily.
• Lock Button: Locks the control panel to prevent accidental changes. Press and hold to unlock.
• °C/°F Button: Toggles the temperature display between Celsius and Fahrenheit.

2. Heating the Water:

After filling, set your desired temperature. The heating rate is approximately 0.9-2.7°F per hour, depending on ambient temperature and initial water temperature. Keep the insulated cover on during heating to optimize efficiency.

3. Using the Air Jets:

Press the jet button on the control panel to activate the air jets. The jets will create bubbles for a relaxing massage. The jet function has a timed auto-shutoff to prevent overheating of the air pump.

Maintenance

Regular maintenance is essential for the performance and hygiene of your spa.

1. Water Filtration:

The spa features a filtration system with replaceable filter cartridges. It is recommended to clean the filter cartridges regularly (e.g., weekly) and replace them every 1-2 months, or as needed, depending on usage.

The filtration system uses replaceable filter cartridges to keep water clean.

2. Water Treatment:

Maintain proper water chemistry using spa-specific chemicals (e.g., chlorine, bromine, pH adjusters). Test the water regularly and adjust chemical levels as necessary to ensure safe and clean water.

3. Draining and Cleaning:

Drain and clean the spa periodically, typically every 1-3 months, depending on usage. Use a mild, non-abrasive cleaner for the interior surface. Rinse thoroughly before refilling.

4. Storage:

When not in use for extended periods, or during cold weather, drain, clean, and thoroughly dry the spa. Deflate and fold it compactly. Store in a dry, temperate location, away from direct sunlight and extreme temperatures.

Troubleshooting

This section addresses common issues you might encounter with your inflatable hot tub spa.

1. Spa Not Heating:

• Ensure the power cord is securely plugged in and the RCD/GFCI is not tripped.
• Check if the desired temperature is set higher than the current water temperature.
• Verify that the filter cartridges are clean and not clogged, as this can restrict water flow.
• Ensure the spa cover is on to prevent heat loss, especially during colder ambient temperatures.

2. Jets Not Working:

• Check power connection.
• Ensure the jet function is activated on the control panel.
• The jet function has an auto-shutoff timer; wait for it to reset if it was recently used.

3. Water Quality Issues (Cloudy/Green Water):

• Test water chemistry and adjust sanitizer (chlorine/bromine) and pH levels.
• Clean or replace filter cartridges.
• Run the filtration system for longer periods.
• Consider shocking the water with a higher dose of sanitizer if necessary.

4. Spa Losing Air:

• Check the inflation valve cap to ensure it is securely tightened.
• Inspect the spa liner for any punctures or small leaks. Use soapy water to identify bubbles indicating a leak.
• Use the provided repair patch kit for small punctures.

For issues not covered here, please refer to the warranty and support section or contact customer service.

Specifications

Detailed technical specifications for the AVENLI Inflatable Hot Tub Spa.

Dimensions of the AVENLI Inflatable Hot Tub Spa.

Safety Information

Adhering to safety guidelines is paramount for preventing injury and ensuring safe operation of your spa.

General Safety Precautions:

• Always supervise children in and around the spa.
• Do not exceed the maximum water temperature of 104°F (40°C). For younger children or individuals with health conditions, lower temperatures are recommended.
• Limit immersion time, especially at higher temperatures, to avoid hyperthermia.
• Consult a physician before use if you are pregnant, have heart disease, high blood pressure, diabetes, or any other health condition.
• Do not use the spa if you are under the influence of alcohol, drugs, or medication that may cause drowsiness.
• Keep all electrical appliances away from the spa.
• Ensure the spa is connected to a grounded power outlet protected by an RCD/GFCI (Residual Current Device/Ground Fault Circuit Interrupter).
• Always use the lockable cover when the spa is not in use to prevent unsupervised access and heat loss.

The spa features a 5-layer protection system for enhanced safety.

Warranty and Support

For warranty information, technical support, or replacement parts, please contact AVENLI customer service. Keep your purchase receipt as proof of purchase for warranty claims.

Contact information can typically be found on the product packaging, the manufacturer's official website, or through your retailer's customer support channels.