Introduction
Thank you for choosing the Lindby Romaine Ceiling Lamp. This manual provides essential information for the safe installation, operation, and maintenance of your new lamp. Please read these instructions carefully before installation and retain them for future reference.
Image: The Lindby Romaine Ceiling Lamp, featuring a round bamboo shade, installed on a ceiling.
Safety Instructions
Always follow basic safety precautions when installing or using electrical products to reduce the risk of fire, electric shock, and personal injury.
- Disconnect Power: Always switch off the main power supply at the circuit breaker or fuse box before beginning installation, maintenance, or bulb replacement.
- Qualified Electrician: Installation should be performed by a qualified electrician or a competent person if you are unsure.
- Voltage: Ensure the supply voltage matches the lamp's operating voltage (230V).
- Indoor Use Only: This lamp is designed for indoor use (IP20 protection class). Do not expose to moisture or extreme temperatures.
- Bulb Type: Use only E27 bulbs with a maximum wattage of 15W LED. Do not exceed the recommended wattage.
- Secure Mounting: Ensure the lamp is securely mounted to a stable ceiling structure.
- Cleaning: Clean only with a dry, soft cloth. Do not use abrasive cleaners or solvents.
Package Contents
Carefully unpack the box and ensure all components are present and undamaged. If any parts are missing or damaged, do not attempt to assemble or install the lamp. Contact customer support.
- 1x Lindby Romaine Ceiling Lamp (bamboo shade and metal base)
- Mounting hardware (screws, wall plugs)
- Instruction Manual
Note: The E27 light bulb is not included and must be purchased separately.
Image: The main components of the lamp, including the bamboo shade and the separate metal base with an E27 socket.
Setup and Installation
Important: Before starting, ensure the power supply is switched off at the main circuit breaker.
- Prepare Mounting Location: Choose a suitable location on the ceiling. Mark the drilling points for the mounting bracket.
- Install Mounting Bracket: Drill holes at the marked points. Insert wall plugs (if necessary) and securely fasten the mounting bracket to the ceiling using the provided screws.
- Electrical Connection: Connect the household electrical wires to the lamp's terminal block. Ensure correct polarity (Live, Neutral, Earth) according to local electrical codes. Secure all connections.
- Attach Lamp Base: Carefully attach the lamp's metal base to the mounting bracket, securing it with the screws provided.
- Install Light Bulb: Screw an E27 LED bulb (max 15W) into the lamp holder. Do not overtighten.
- Attach Bamboo Shade: Carefully place the bamboo shade onto the lamp base and secure it according to the design (usually by twisting or using small fasteners).
Image: Detail of the lamp's metal base showing the mounting bracket and internal wiring for connection.
Image: A close-up of the E27 lamp holder with a clear LED filament bulb inserted.
Operating Instructions
Once installed, restore power at the main circuit breaker. The Lindby Romaine Ceiling Lamp is operated via a standard wall switch connected to your household electrical circuit. Simply toggle the wall switch to turn the lamp on or off.
Maintenance
- Cleaning: Ensure the lamp is switched off and cool before cleaning. Use a soft, dry cloth to gently wipe the bamboo shade and metal parts. Do not use water, cleaning sprays, or abrasive materials, as these can damage the finish or electrical components.
- Bulb Replacement:
- Switch off the power supply at the main circuit breaker.
- Allow the old bulb to cool completely.
- Carefully unscrew the old E27 bulb.
- Screw in a new E27 LED bulb (max 15W).
- Restore power.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light up. |
|
|
| Lamp flickers. |
|
|
Specifications
Image: Technical drawing showing the dimensions of the lamp: 50 cm diameter, 30 cm height, with a 12 cm diameter base.
| Feature | Detail |
|---|---|
| Brand | Lindby |
| Model Number | 10030646 |
| Dimensions (L x W x H) | 50 x 50 x 30 cm |
| Weight | 750 g |
| Material | Bamboo, Iron |
| Style | Country house/Rustic |
| Color | Light wood, White |
| Number of Lights | 1 |
| Socket Type | E27 |
| Max Wattage | 15W LED |
| Voltage | 230 Volt |
| Protection Class | II |
| IP Rating | IP20 (Indoor use only) |
| Power Source | Corded Electric |
Warranty
This product is covered by the standard manufacturer's warranty. Please refer to your purchase documentation or contact the seller for specific warranty terms and conditions. Keep your proof of purchase for any warranty claims.
Customer Support
If you have any questions, require assistance with installation, or encounter issues not covered in this manual, please contact the seller directly through your Amazon order page or refer to the contact information provided by Lindby.
Seller: Lampen24NL
For further information, you may visit the Lampen24NL seller profile on Amazon.
