Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Perlegear PGTVS26 Universal Swivel Tabletop TV Stand. Please read this manual thoroughly before installation to ensure safe and correct usage. Keep this manual for future reference.
Safety Information
- Do not exceed the maximum weight capacity of 40 kg (88 lbs).
- Ensure your TV's VESA pattern is within the supported range of 100x100mm to 400x400mm.
- This stand is designed for TVs between 32 and 70 inches.
- Always ensure all screws are securely tightened before use.
- Do not allow children to climb on or play with the TV stand.
- If you have any doubts about installation, consult a qualified professional.
Image: The Perlegear PGTVS26 TV Stand supporting a large television and soundbar, highlighting its compatibility with TVs from 32 to 70 inches, a maximum load of 88 lbs (40 kg), and VESA compatibility from 100x100mm to 400x400mm.
Package Contents
Please verify that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, contact Perlegear customer support.
- Base Plate (1)
- Support Column (1)
- TV Plate (1)
- VESA Brackets (2)
- Various TV Screws (M4, M6, M8)
- Washers and Spacers
- Cable Management Clips (2)
- Assembly Tools (Hex Key, Wrench)
- Instruction Manual (1)
Setup and Installation
Follow these steps carefully for proper assembly. No drilling is required for this tabletop stand.
- Attach the Support Column to the Base Plate: Secure the main support column to the glass base plate using the provided screws and tools. Ensure it is firmly attached and stable.
- Assemble the TV Plate: Attach the TV plate to the top of the support column.
- Install VESA Brackets to your TV:
- Identify the correct size screws (M4, M6, or M8) and spacers for your TV's VESA mounting holes.
- Attach the VESA brackets to the back of your television, ensuring they are level and securely fastened.
- Mount the TV onto the Stand: Carefully lift your TV and hook the VESA brackets onto the TV plate. Secure the TV to the stand using the safety screws or locking mechanisms provided.
- Cable Management: Use the included cable management clips to route and organize your TV cables along the back of the support column for a tidy appearance.
Image: A person demonstrating the process of mounting a television onto the Perlegear PGTVS26 stand, highlighting the straightforward installation that requires no drilling.
Image: A detailed view of the integrated cable management system on the Perlegear PGTVS26 TV stand, showing how cables are neatly routed and secured along the central column.
Operating Instructions
The Perlegear PGTVS26 stand offers various adjustments for optimal viewing.
Height Adjustment
The stand features 9 height adjustment options, allowing you to position your TV between approximately 18 inches (45.7 cm) and 24 inches (61 cm) from the tabletop to the center of the TV. To adjust the height:
- Carefully loosen the screws that secure the TV plate to the support column.
- Adjust the TV to your desired height.
- Retighten the screws firmly to secure the TV at the new height.
Image: An illustration demonstrating the eye-level comfort provided by the Perlegear PGTVS26 TV stand, showcasing its 9 height adjustment options that allow positioning the TV between 18 and 24 inches.
Swivel Function
The TV plate can swivel up to ±35 degrees (70 degrees total) left or right, allowing you to achieve the best viewing angle from different positions in your room.
- Gently grasp the sides of your TV and rotate it to the desired angle.
- The swivel mechanism is designed for smooth movement.
Image: A visual comparison highlighting the stability and swivel capability of the Perlegear PGTVS26 TV stand (shown with ±30° swivel), contrasting it with a TV on standard, less stable feet.
Image: The Perlegear PGTVS26 TV stand demonstrating its swivel function, allowing the television to be angled for optimal viewing from various positions in a room.
Tilt Function
The TV can be tilted upwards by up to +8 degrees to reduce glare or optimize viewing from a lower position.
- Loosen the tilt adjustment knobs or screws on the VESA brackets.
- Adjust the TV to the desired tilt angle.
- Retighten the knobs or screws to secure the tilt position.
Image: The Perlegear PGTVS26 TV stand showcasing its +8 degree tilt capability, allowing for glare reduction and improved viewing angles.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the stand. Avoid abrasive cleaners or solvents that may damage the finish.
- Regular Checks: Periodically check all screws and connections to ensure they remain tight and secure. Loose connections can lead to instability.
- Inspection: Inspect the stand for any signs of wear or damage. If any damage is found, discontinue use and contact customer support.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| TV is not level. | VESA brackets or TV plate not installed evenly. | Re-adjust the VESA brackets on the TV or the TV plate on the column to ensure they are level. Some stands have a small leveling adjustment. |
| Stand feels unstable. | Screws are loose; TV weight exceeds capacity; TV size is too large. | Ensure all assembly screws are tightened. Verify your TV's weight and size are within the stand's specifications (max 40 kg / 88 lbs, 32-70 inches). |
| Difficulty adjusting height/swivel/tilt. | Adjustment screws are too tight; mechanism is stiff. | Loosen adjustment screws slightly before attempting to move. Apply a small amount of silicone lubricant to moving parts if necessary (avoid oil-based lubricants). |
| Missing parts. | Packaging error. | Contact Perlegear customer support with your purchase details. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | PGTVS26 |
| Brand | Perlegear |
| TV Size Compatibility | 32 - 70 inches |
| Weight Capacity | 40 kg (88 lbs) |
| VESA Compatibility | 100x100mm to 400x400mm |
| Height Adjustment | 9 options, 18 - 24 inches (from tabletop to TV center) |
| Swivel Range | ±35 degrees |
| Tilt Range | +8 degrees |
| Material | Alloy Steel, Tempered Glass Base |
| Color | Black |
Warranty and Support
Perlegear products are manufactured with quality and durability in mind. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration.
For technical assistance, missing parts, or warranty claims, please contact Perlegear customer support through the retailer where you purchased the product or visit the official Perlegear website.
Contact Information:
- Website: www.perlegear.com (Example, actual URL may vary)
- Email: support@perlegear.com (Example, actual email may vary)
