Axial SCX24 Ford Bronco 4X4 RTR Brushed Rock Crawler User Manual

1. Safety Information

WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. The product manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury.

2. What's in the Box

Your Axial SCX24 Ford Bronco 4WD RTR package includes the following components:

• (1) Axial SCX24 Ford Bronco 4WD RTR
• (1) Assembled SCX24 chassis, drivetrain, and suspension
• (1) Spektrum SLT2 2.4GHz radio system
• (1) Spektrum 350mAh LiPo battery and USB charger
• Battery
• Product Manual

Image: The complete package contents, featuring the Axial SCX24 Ford Bronco, Spektrum SLT2 2.4GHz radio system, Spektrum 350mAh LiPo battery, and USB charger.

3. Product Overview

The Axial SCX24 Ford Bronco is a 1/24 scale Ready-To-Run (RTR) brushed rock crawler designed for off-road enthusiasts. It features a highly detailed, officially licensed Ford Bronco hard body and robust components for challenging terrains.

Key Features:

• Officially licensed Ford Bronco hard body
• Realistic and durable steel C-channel frame rails
• Oil-filled shocks
• Spektrum SLT2 2.4GHz radio system
• Spektrum 350mAh LiPo battery and USB charger

Image: Front-side view of the green Axial SCX24 Ford Bronco 4X4 RTR Brushed Rock Crawler.

Image: The green Axial SCX24 Ford Bronco navigating a rocky outdoor environment.

Image: A group of three Axial SCX24 Ford Broncos in red, white, and green, showcasing their design on a rocky trail.

4. Setup

4.1 Battery Installation and Charging

The vehicle comes with a Spektrum 350mAh LiPo battery and a USB charger. Ensure the battery is fully charged before first use. The remote control requires 4 AA batteries (included).

1. Connect the vehicle's LiPo battery to the provided USB charger.
2. Plug the USB charger into a compatible USB power source. The LED on the charger will indicate charging status (e.g., red for charging, green for fully charged).
3. Once charged, disconnect the battery from the charger and connect it to the vehicle's ESC/receiver unit.
4. Install 4 AA batteries into the remote control. Ensure correct polarity.

4.2 Remote Control Pairing

The vehicle and remote control are typically pre-bound from the factory. If re-binding is necessary, refer to the detailed instructions in the included product manual.

5. Operating Instructions

5.1 Basic Controls

• Throttle: Use the trigger on the remote control to move the vehicle forward (pull) or backward (push).
• Steering: Use the steering wheel on the remote control to turn the vehicle left or right.

5.2 Driving Tips

• Start with low throttle settings to get accustomed to the vehicle's response.
• Approach obstacles slowly and deliberately to maximize traction and avoid rollovers.
• Utilize the vehicle's high articulation and ground clearance for challenging rock crawling.

5.3 Product in Action

Video: Official product launch video for the Axial SCX24 Ford Bronco, showcasing its features and capabilities on various terrains.

Video: An Axial RC Truck (AX24 XC-1) demonstrating its 4-wheel steering modes (Front Steer, 4-Wheel Steer, Crabwalk), side plate chassis, sealed ball bearings, and worm-drive axle housing.

6. Maintenance

6.1 Cleaning

After each use, especially in dusty or wet conditions, clean your vehicle to ensure longevity. Use a soft brush or compressed air to remove dirt and debris. Avoid using harsh chemicals or excessive water directly on electronics.

6.2 Inspections

Regularly inspect the following components:

• Tires and Wheels: Check for wear, damage, and ensure beadlocks are secure.
• Chassis and Suspension: Look for loose screws, bent links, or damaged shocks. The vehicle features durable steel C-channel frame rails and oil-filled shocks.
• Drivetrain: Inspect the worm-drive axle housing and sealed ball bearings for smooth operation.
• Electronics: Ensure all wires are securely connected and free from damage.

Image: Detailed view of the durable steel C-channel chassis frame of the Axial SCX24.

Image: Close-up of the oil-filled shocks, providing smooth suspension for the Axial SCX24.

7. Troubleshooting

If you encounter issues with your Axial SCX24 Ford Bronco, consider the following common problems and solutions:

• Vehicle not responding: Ensure both the vehicle battery and remote control batteries are charged and correctly installed. Verify the remote and vehicle are powered on and properly bound.
• Loss of power/short run time: The vehicle battery may be low. Recharge the Spektrum 350mAh LiPo battery.
• Poor steering response: Check for obstructions in the steering mechanism or damage to the steering servo. Ensure the remote's steering trim is centered.
• Unusual noises: Inspect the drivetrain components (gears, axles, universal joints) for debris or damage.

For more complex issues, please refer to the detailed troubleshooting guide in the full product manual or contact customer support.

8. Specifications

9. Warranty & Support

For warranty information, technical support, or replacement parts, please visit the official Axial or Horizon Hobby website. Keep your proof of purchase for any warranty claims.

You can also visit the Axial Store on Amazon for additional product information and accessories.