Introduction
The Evenflo Pivot Modular Travel System is a versatile and durable solution designed for the modern parent. This system includes a multi-mode stroller and the LiteMax Infant Car Seat, offering up to 6 configurations to adapt to your child's growth and your family's needs. From pramette mode for newborns to toddler mode, and seamless integration with the infant car seat, this system prioritizes comfort, safety, and convenience.
The LiteMax Infant Car Seat meets or exceeds all applicable federal safety standards, undergoing rigorous structural integrity, rollover, and temperature testing. This manual provides detailed instructions for the proper assembly, operation, and maintenance of your Evenflo Pivot Modular Travel System to ensure safe and effective use.
Safety Information
Always prioritize your child's safety. Read and understand all instructions before assembly and use. Keep this manual for future reference.
- Never leave your child unattended in the stroller or car seat.
- Ensure all locking mechanisms are engaged before placing your child in the stroller or car seat.
- The LiteMax Infant Car Seat is designed for infants weighing 3 to 30 lb (1.4 - 13.6 kg) and measuring 15.7 to 32 in. (40 - 81 cm).
- The toddler seat has a maximum weight capacity of 50 lb (22.6 kg) and height recommendations up to 38 in. (96 cm).
- Always use the 5-point harness system correctly adjusted to your child's size.
- Do not use accessories or replacement parts other than those approved by Evenflo.
- Avoid placing hot liquids or heavy items in the cup holder.
- Ensure the stroller is fully unfolded and locked before use.
Setup
1. Stroller Assembly
- Unpack all components from the box: stroller frame, toddler seat, and LiteMax Infant Car Seat with base.
- Attach Wheels: Insert the rear wheels into the axle until they click securely into place. Attach the front wheels by pushing them into the designated slots until they lock.
- Unfold Stroller Frame: Release the folding latch and lift the handlebar until the frame locks into the open position. Ensure all frame locks are engaged.
- Attach Toddler Seat: Align the toddler seat with the attachment points on the stroller frame. Push down firmly until you hear a click, indicating it is securely latched. The seat can be attached facing forward or parent-facing.
Figure 1: Fully assembled Evenflo Pivot Modular Travel System, showing the stroller and infant car seat.
2. LiteMax Infant Car Seat Base Installation
Refer to the separate LiteMax Infant Car Seat manual for detailed vehicle installation instructions. The integrated belt lock-off system ensures a secure installation.
Figure 2: The LiteMax Infant Car Seat features an anti-rebound bar for enhanced safety.
Operating Instructions
1. Stroller Modes and Seat Adjustment
The modular frame allows for 6 modes of use. The toddler seat can be easily reversed to be parent-facing or forward-facing. It also transitions into a pramette mode for newborns.
- Pramette Mode: To convert the toddler seat to pramette mode, recline the seat fully flat and adjust the footrest upwards. This provides a comfortable, lie-flat position for infants.
- Toddler Mode: Adjust the seat recline and footrest to an upright or semi-reclined position suitable for older babies and toddlers.
- Reversing the Seat: To change the seat direction, locate the release levers on both sides of the seat near the attachment points. Squeeze the levers and lift the seat off the frame. Rotate the seat to the desired direction and reattach until it clicks securely.
Figure 3: The stroller offers 6 modes for versatile use as your child grows.
Figure 4: The toddler seat easily transitions into a comfortable carriage mode.
2. Attaching/Detaching LiteMax Infant Car Seat
- To Attach: Ensure the stroller frame is unfolded and locked. Align the LiteMax Infant Car Seat with the attachment points on the stroller frame. Push down firmly until you hear a click, indicating it is securely latched.
- To Detach: Locate the release handle at the back of the car seat. Squeeze the handle and lift the car seat straight up from the stroller frame.
Figure 5: The LiteMax Infant Car Seat seamlessly moves from its base to the stroller with one click.
3. Folding the Stroller
The stroller features a convenient self-standing fold for easy storage and transport.
- Ensure the toddler seat is in the forward-facing position (if attached).
- Locate the trigger-fold activation levers on the handlebar.
- Pull the levers upwards and push the handlebar forward, allowing the stroller to fold in half.
- The stroller will self-stand once fully folded.
Figure 6: The stroller folds compactly and self-stands for easy storage.
Maintenance
1. Cleaning Instructions
- Fabric: Spot clean fabric with mild soap and warm water. Air dry. Do not bleach.
- Frame: Wipe the frame with a soft, damp cloth. Dry thoroughly.
- Wheels: Periodically clean the wheels and axles to remove dirt and debris. Lubricate moving parts with a silicone-based lubricant if needed.
2. General Care
- Store the travel system in a dry, cool place away from direct sunlight.
- Regularly inspect all parts for wear, damage, or loose fasteners. Discontinue use if any part is damaged.
- Ensure the harness system is free of twists and properly adjusted.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stroller does not fold/unfold smoothly. | Locking mechanisms are not fully disengaged/engaged; debris in joints. | Ensure all levers are pulled/pushed completely. Clean any visible debris from folding joints. |
| Car seat does not click into stroller/base. | Misalignment; obstruction; release handle not fully engaged. | Realign the car seat with the attachment points. Check for any obstructions. Ensure the release handle is not being squeezed during attachment. |
| Wheels squeak or are difficult to maneuver. | Dirt/debris in wheel axles; lack of lubrication. | Clean wheels and axles. Apply a silicone-based lubricant to moving parts. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Evenflo |
| Model Number | TS100411990 |
| Color | Casual Gray |
| Material | Polyester |
| Fabric Type | 1% Aluminum, 1% EPS, 26% Steel, 3% EVA, 41% PP, 8% Polyester, 9% PA, 9% POM |
| Frame Material | Metal |
| Age Range Description | Kid |
| Included Components | 1 Stroller, 1 Car Seat, 1 Toddler Seat |
| Item Height | 41 inches |
| Item Weight | 38.1 Pounds |
| Folded Size | 26" x 19.5" x 40" |
| Item Dimensions L x W x H | 32"L x 26"W x 41"H |
| Maximum Weight Recommendation (Stroller Seat) | 50 Pounds |
| Rear Facing Maximum Weight (Car Seat) | 30 Pounds (LiteMax Infant Car Seat) |
| Rear Facing Minimum Weight (Car Seat) | 3 Pounds (LiteMax Infant Car Seat) |
| Specification Met | JPMA |
| Canopy Material | Polyester |
| Tire Material | EVA |
| Harness Type | 5 Point |
| Stroller Type | Modular Stroller |
| Is Car Seat Compatible | Yes |
| Number of Cup Holders | 1 (Removable) |
| Seating Capacity | 1 |
| Number of Wheels | 4 |
Figure 7: Key features include a large canopy with peek-a-boo window, durable cruiser tires, and a removable cup holder.
Figure 8: The oversized storage basket provides ample space for essentials.
Warranty & Support
Manufacturer Warranty: The Evenflo Pivot Modular Travel System is covered by a 90-day limited warranty from the manufacturer.
Customer Support: For assistance with installation or any product-related inquiries, Evenflo's ParentLink® Consumer Care Team offers real-time online support. You can access live video support with a certified car seat safety technician to ensure proper vehicle installation and address any concerns.
Visit the Evenflo Store for more information and support resources.
