1. Safety Information
Please read this instruction manual thoroughly before using the BOB AND BRAD VibeFlow G100 Pro Vibration Muscle Massager. Adhere to all safety warnings and instructions to prevent injury or damage.
- Always read the instruction manual before use.
- Do not use on injured, inflamed, or swollen areas of the body.
- Keep the device away from water and do not use it in wet environments.
- Do not use the massager while sleeping or if you are unconscious.
- Consult a medical professional before use if you have a medical condition, are pregnant, or have any concerns about using a massage device.
- Keep out of reach of children.
- Do not use the massager for more than 15 minutes at a time on any single area.
- Avoid applying excessive pressure, especially on sensitive areas like joints, bones, or the head.
- Do not disassemble, modify, or attempt to repair the device yourself. Contact customer support for assistance.
Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is intended for general wellness and muscle relief.
2. Product Overview
The BOB AND BRAD VibeFlow G100 Pro is a high-frequency vibration muscle massager designed for deep tissue relief and muscle recovery. It utilizes 116Hz vibrations to target muscle fatigue, soreness, and stiffness across the body, excluding the head.
Image 2.1: The VibeFlow G100 Pro massager, its protective carrying case, and product packaging.
2.1 Key Features
- High-Frequency Vibration: Delivers 116Hz vibrations for rapid and deep muscle relief, operating 3-5 times faster than traditional percussive massagers.
- Powerful Brushless Motor: Equipped with a 52W brushless motor, providing ultra-fast vibrations up to 7,000 rpm for effective deep tissue penetration and extended durability (12,000+ hours lifespan).
- Long-Lasting Battery: Features an automotive-grade 2550 mAh battery, offering 4-7 hours of runtime on a single charge, depending on speed and pressure settings.
- Portable Design: Weighs only 1.15 lbs (3.5'' x 3.2'' x 8.4'' / 8.9 x 8.1 x 21.3 cm), making it highly portable and easy to carry in a gym bag or travel case.
- Integrated Attachments: Includes 4 specialized fixed attachments for targeted relief across various muscle groups, eliminating the need for swapping heads.
- One-Button Control: Simple operation with a single button to power on/off and cycle through 4 speed settings.
Image 2.2: Comparison illustrating the gentle, full-body application of vibration massage versus the more stimulating, large-muscle focus of percussive massage.
Image 2.3: Internal view of the powerful 52W brushless motor, highlighting its high-speed capability.
Image 2.4: Illustration of the 2550 mAh automotive-grade battery, providing extended usage time.
3. Setup
3.1 Initial Charging
Before first use, fully charge the VibeFlow G100 Pro massager. The device comes with a USB-C charging cable.
- Connect the USB-C cable to the charging port on the massager.
- Connect the other end of the USB-C cable to a compatible USB power source (e.g., wall adapter, power bank, laptop USB port).
- The charging indicator lights will illuminate to show charging status. Allow the device to charge until all indicator lights are solid, indicating a full charge.
Image 3.1: Charging the VibeFlow G100 Pro using a USB-C cable with various power sources.
4. Operation
4.1 Power On/Off and Speed Adjustment
The VibeFlow G100 Pro features a single-button control for ease of use.
- Power On: Press and hold the power button for 2 seconds. The device will start at the lowest speed setting (M1).
- Adjust Speed: Briefly press the power button to cycle through the 4 available speed settings (M1, M2, M3, M4). Indicator lights will show the current speed level.
- Power Off: Press and hold the power button for 2 seconds to turn off the device from any speed setting.
Image 4.1: The control panel of the VibeFlow G100 Pro, illustrating the power button and speed indicators.
Image 4.2: Visual representation of the four speed levels and their corresponding RPMs.
4.2 Using the Attachments
The VibeFlow G100 Pro features four fixed attachments, each designed for specific applications:
- Bullet Head: Ideal for acupoints, fine areas, and trigger point release.
- Large Flat Head: Versatile for medium to large muscle fascia.
- Flat Head: Suitable for small surface areas like meridians of hands, fingers, feet, and toes.
- Silicone Massage Head: Designed for medium to large muscle groups and virtually all body parts, offering a gentler touch.
Image 4.3: The four integrated massage heads and their specific applications for targeted relief.
4.3 Application Guidelines
Apply the massager to the desired muscle area. Move the device slowly and steadily over the muscle, allowing the vibrations to penetrate. Avoid pressing too hard, especially on bony areas or joints. Refer to the included professional massage guide for visual demonstrations and specific techniques for different body parts.
- Back Massage: Use the Large Flat Head or Silicone Massage Head. Move along the back muscles, avoiding the spine directly.
Image 4.4: Demonstrating proper use of the VibeFlow G100 Pro for back muscle relief.
- Shoulder and Neck: Use the Silicone Massage Head or Large Flat Head. Apply gentle pressure to relieve tension.
Image 4.5: Using the VibeFlow G100 Pro to alleviate shoulder tension.
- Arms and Wrists: The Flat Head or Bullet Head can be used for more precise application on smaller muscle groups or delicate areas.
Image 4.6: Applying the VibeFlow G100 Pro to the forearm for gentle relief.
- Legs and Thighs: The Large Flat Head or Silicone Massage Head is effective for larger leg muscles.
Image 4.7: Targeted leg recovery using the VibeFlow G100 Pro.
- Feet: Use the Flat Head or Bullet Head for plantar areas, easing foot tension.
Image 4.8: Promoting plantar blood circulation and easing foot tension.
5. Maintenance
5.1 Cleaning
- Ensure the device is powered off and unplugged before cleaning.
- Wipe the surface of the massager with a soft, slightly damp cloth.
- Do not use abrasive cleaners, alcohol, or harsh chemicals, as these may damage the finish or internal components.
- Do not immerse the device in water or any other liquid.
5.2 Storage
- Store the massager in its original carrying case when not in use to protect it from dust and damage.
- Keep the device in a cool, dry place, away from direct sunlight and extreme temperatures.
- Avoid placing heavy objects on top of the massager during storage.
6. Troubleshooting
If you encounter any issues with your VibeFlow G100 Pro massager, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Low battery or no charge. | Charge the device fully using the provided USB-C cable. Ensure the power button is pressed and held for 2 seconds to turn on. |
| Weak vibration or inconsistent power. | Low battery. | Recharge the device. Performance may decrease as battery level drops. |
| Device stops unexpectedly during use. | Overheating or low battery. | Allow the device to cool down if it feels warm. Recharge if the battery is low. The device has an automatic shut-off feature to prevent overheating after 15 minutes of continuous use. |
| Unusual noise during operation. | Internal component issue. | Discontinue use and contact customer support. Do not attempt to open or repair the device. |
If the problem persists after attempting these solutions, please contact BOB AND BRAD customer support for further assistance.
7. Specifications
- Model: G100 Pro
- Brand: BOB AND BRAD
- Product Dimensions: 3.39 x 3.03 x 8.39 inches (8.9 x 8.1 x 21.3 cm)
- Item Weight: 1.17 Pounds (0.53 Kilograms)
- Power Source: Battery Powered
- Battery Type: 1 Lithium Metal battery (included), 2550 mAh, Automotive-Grade
- Runtime: 4–7 hours (varies by pressure/speed settings)
- Motor: 52W Brushless Motor
- Vibration Frequency: 116Hz
- RPM Range: 5,000 - 7,000 RPM (4 speed settings)
- Material: Aluminum, High Speed Vibration components
- Use For: Arm, Back, Hand, Leg, Shoulder (full body except head)
- Manufacturer: BOB AND BRAD
8. Warranty and Support
8.1 Warranty Information
The BOB AND BRAD VibeFlow G100 Pro Vibration Muscle Massager comes with a 2-year warranty. This warranty covers manufacturing defects and issues arising from normal use. Please retain your proof of purchase for warranty claims.
8.2 Customer Support
For any questions, technical support, or warranty claims, please contact BOB AND BRAD customer service. You can typically find contact information on the product packaging or the official BOB AND BRAD website.
For additional resources and instructional videos, visit the official BOB AND BRAD store or their online platforms.
