1. Product Overview
The T POWER 42V AC DC Adapter is designed to provide reliable power for compatible electric bikes and scooters. This charger features advanced safety mechanisms to protect your device during charging.
Image: T POWER 42V AC DC Adapter with its integrated power cable.
Key Features:
- Input Voltage Range: AC 100V - 240V, suitable for international use.
- Output: DC 42V - 1.5A / 2A Compatible.
- Safety Certifications: UL, CE, RoHS certified for safety standards.
- Protection Features: Over Voltage Protection, Over Current Protection, Short-circuit Protection.
- LED Indicator: Provides charging status feedback.
Image: Overview of the superior safety features integrated into the T POWER adapter, including protection against over-current, over-temperature, over-voltage, and short circuits.
2. Setup Instructions
Follow these steps to properly connect and begin using your T POWER 42V AC DC Adapter:
- Verify Compatibility: Ensure your device (electric bike or scooter) requires a 42V DC input and has a compatible barrel connector. This charger is compatible with Jetson Arro (JJ7-BLK), Jetson Atlas (JATLAS, JATLAS-BLK), Jetson Element Pro (JELEM2 BLK), Jetson Horizon, and Jetson Ora Pro (JORAPR, JORAPR-BLK, JORAPR-OS-BLK) models, among others.
- Connect to Device: Insert the barrel connector of the charger firmly into the charging port of your electric bike or scooter.
- Connect to Power Outlet: Plug the AC power cord of the adapter into a standard AC 100V-240V wall outlet.
- Initiate Charging: Once connected, the charger's LED indicator will illuminate, signaling the start of the charging process.
Important Note: The 36V specification often refers to the battery's nominal voltage, not the charger's output voltage. This charger provides 42V DC output, which is the correct voltage for charging 36V battery systems. Always confirm your device's charging requirements before use.
Image: Detail of the 5.5x2.5/2.1mm 1-prong barrel connector, showing its polarity for correct connection.
3. Operating Instructions
The T POWER adapter features an LED indicator to communicate the charging status:
Image: T POWER charger highlighting the LED indicator and its various states for charging, full charge, and error conditions.
- Red Light Flashing: Charging in progress.
- Green Light Solid: Charge full or charger disconnected from the device.
- Red Light Flashes Fast: Indicates a defective state or error.
- Red Light Flashes Fast & Slow: Indicates a temperature anomaly.
Always monitor the LED indicator to ensure proper charging and to identify any potential issues.
4. Maintenance
To ensure the longevity and optimal performance of your T POWER adapter, follow these maintenance guidelines:
- Keep Dry: Avoid exposing the charger to water or high humidity.
- Store Properly: When not in use, store the charger in a cool, dry place away from direct sunlight.
- Handle with Care: Do not drop or subject the charger to physical shock.
- Clean Gently: Use a dry, soft cloth to clean the exterior of the charger. Do not use liquid cleaners.
- Inspect Cables: Periodically check the power cable and connector for any signs of damage, fraying, or bending. Discontinue use if damage is observed.
5. Troubleshooting
If you encounter issues with your T POWER adapter, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger LED not lighting up | No power from outlet, loose connection, or faulty charger. | Ensure the wall outlet is functional. Check all connections are secure. Try a different outlet. If the issue persists, the charger may be faulty. |
| Device not charging | Incorrect connection, incompatible device, or device battery issue. | Verify the charger is correctly plugged into both the device and the power outlet. Confirm the device is compatible with a 42V charger. Check the device's battery for any issues. |
| Charging is slow | Device drawing less current, or charger operating below optimal conditions. | Ensure the charger is not in an excessively hot environment. While the charger is compatible with 1.5A and 2A devices, charging speed may vary. |
| Red LED flashes fast | Defective state or internal error. | Disconnect the charger from both the device and the power outlet. Wait a few minutes, then reconnect. If the error persists, discontinue use and contact support. |
| Red LED flashes fast & slow | Temperature anomaly. | Ensure the charger is in a well-ventilated area and not covered. Allow it to cool down before attempting to use it again. |
6. Specifications
| Specification | Detail |
|---|---|
| Brand | T POWER |
| Model Number | TP - Jetson 082-10-0013 CC3615 CP4215 |
| Input Voltage Range | AC 100V - 240V |
| Output Voltage | DC 42 Volts |
| Output Current | 2 Amps (1.5A compatible) |
| Wattage | 80 watts |
| Connector Type | Barrel Connector (5.5x2.5/2.1mm) |
| Product Dimensions | 4.5 x 2 x 1.25 inches |
| Item Weight | 8 ounces |
| Special Feature | Charging Indicator |
| Certifications | UL, CE, RoHS |
7. Warranty and Support
T POWER is committed to providing quality products and customer satisfaction.
- 30-Day Return Policy: You may return your undamaged product and packaging within 30 days of purchase to receive a full refund for any reason.
- 1-Year Limited Manufacturer Warranty: We will take care of all quality-related issues. Easy exchange with a replacement is available.
- Technical Support: If you have questions, need assistance, or received the wrong item, please contact the manufacturer directly.