1. Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Faber Iris 75cm BLDC Autoclean Chimney. Please read this manual thoroughly before installation and use, and retain it for future reference.
The Faber Iris chimney is designed to provide effective ventilation for your kitchen, featuring a powerful BLDC motor, autoclean function, and intuitive controls.
2. Safety Information
Always adhere to the following safety precautions to prevent injury or damage to the appliance:
- Ensure the power supply matches the voltage specified on the rating label (240V).
- Installation must be performed by a qualified technician in accordance with local regulations.
- Do not operate the chimney without the oil collector properly installed.
- Regular cleaning of the oil collector and internal components is crucial for optimal performance and fire safety.
- Keep children away from the appliance during operation and cleaning.
- Do not flambé under the range hood.
- Ensure adequate ventilation in the room when the range hood is used simultaneously with gas or other fuel-burning appliances.
3. Product Overview and Features
The Faber Iris 75cm BLDC Autoclean Chimney is a wall-mounted kitchen appliance designed for efficient smoke and odor extraction. Key features include:
- BLDC Motor: A Brushless DC motor provides high efficiency, reduced noise (52 Decibels), and enhanced durability.
- Autoclean Function: Simplifies maintenance by automatically cleaning internal components and collecting oil in a dedicated collector.
- Filterless Design: Eliminates the need for traditional filters, reducing cleaning effort.
- 1500 m³/hr Suction Capacity: Powerful airflow suitable for intense cooking.
- Touch & Gesture Control: Offers convenient operation with 9 speed settings.
- LED Lighting: Two integrated LED rectangle lights illuminate your cooking area.
- Oil Collector: A black powder-coated oil collector efficiently gathers extracted oil.
Image: Illustration of the Faber Chimney's BLDC motor, highlighting its high efficiency and low noise operation.
Image: Exploded view of a BLDC motor, illustrating its internal components for efficiency and reliability.
Image: The chimney actively extracting smoke from a cooking pot, demonstrating its 1500 m³/hr suction power.
4. Setup and Installation
The Faber Iris chimney is designed for wall-mounted installation. It can be configured for ducted or ductless (recirculating) operation. For ductless use, a charcoal filter is required (sold separately).
4.1 Pre-Installation Checklist
- Verify that all components are present: Chimney unit, oil collector, mounting hardware, and instruction manual.
- Ensure the wall structure can support the chimney's weight (approximately 11.8 kg).
- Confirm availability of a 240V power outlet within reach of the power cord.
- For ducted installation, ensure proper ducting is available and correctly sized.
4.2 Installation Steps
- Mounting: Securely attach the mounting bracket to the wall at the recommended height above the cooking surface. Refer to the detailed diagrams in the physical instruction manual for precise measurements.
- Chimney Placement: Carefully lift and hang the chimney unit onto the wall bracket.
- Ducting/Recirculation Setup:
- Ducted: Connect the exhaust duct to the chimney outlet and route it to the exterior. Ensure airtight connections.
- Ductless: Install the charcoal filter (if not pre-installed) according to its instructions. The air will be filtered and recirculated into the kitchen.
- Oil Collector Installation: Slide the oil collector into its designated slot at the bottom of the chimney.
- Power Connection: Plug the chimney into a grounded 240V power outlet.
Note: Professional installation is highly recommended to ensure safety and optimal performance.
Image: The Faber Iris chimney displaying its compact dimensions: 41 cm depth, 75 cm width, and 43 cm height.
5. Operating Instructions
The Faber Iris chimney features both touch and gesture controls for ease of use.
5.1 Power On/Off
- Touch Control: Press the power symbol on the control panel to turn the chimney on or off.
- Gesture Control: Wave your hand from left to right in front of the gesture sensor to turn the chimney on. Wave from right to left to turn it off.
5.2 Adjusting Suction Speed
The chimney offers 9 speed settings to accommodate various cooking needs.
- Touch Control: Use the '+' and '-' buttons on the control panel to increase or decrease the suction speed.
- Gesture Control: Wave your hand from left to right to increase speed. Wave from right to left to decrease speed. A quick wave can cycle through speeds.
5.3 LED Lighting
Press the light symbol on the control panel to turn the LED lights on or off.
5.4 Autoclean Function
To activate the autoclean function, press the dedicated autoclean button on the control panel. The chimney will initiate a cleaning cycle, heating the internal components to melt and collect oil into the oil collector. This process typically takes a few minutes.
Image: Visual representation of how to use both gesture and touch controls on the chimney's control panel.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Faber Iris chimney.
6.1 Cleaning the Oil Collector
- The oil collector should be emptied and cleaned regularly, depending on cooking frequency.
- Ensure the chimney is turned off and unplugged before removing the oil collector.
- Carefully slide out the oil collector.
- Dispose of the collected oil responsibly.
- Wash the oil collector with warm, soapy water. Rinse thoroughly and dry completely before reinserting.
Image: The auto-clean feature in action, showing how the oil collector manages cooking residue.
6.2 Exterior Cleaning
- Wipe the exterior surfaces with a soft cloth dampened with mild detergent.
- Do not use abrasive cleaners, steel wool, or harsh chemicals, as these can damage the finish.
- Ensure no liquid enters the control panel or electrical components.
6.3 Charcoal Filter Replacement (Ductless Mode Only)
- If using the chimney in ductless (recirculating) mode, the charcoal filter needs periodic replacement.
- Refer to the charcoal filter's specific instructions for replacement frequency and procedure.
- Always use genuine Faber replacement filters.
7. Troubleshooting
Before contacting customer support, review the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chimney does not turn on. | No power supply. | Check if the power cord is securely plugged in and the circuit breaker is not tripped. |
| Low suction power. | Oil collector is full or dirty. Ducting obstruction (ducted mode). Charcoal filter clogged (ductless mode). | Empty and clean the oil collector. Inspect ducting for blockages. Replace charcoal filter. |
| Unusual noise during operation. | Loose components. Foreign object in blower. | Ensure all parts are securely fastened. Turn off and unplug the chimney, then carefully inspect the blower area for obstructions. Contact service if unable to resolve. |
| Autoclean function not working. | Electrical issue. Sensor malfunction. | Ensure power supply is stable. If the issue persists, contact customer support. |
8. Specifications
| Feature | Detail |
|---|---|
| Model | 320.0728.331 |
| Type | Curved glass, Wall mounted, BLDC Motor |
| Suction Capacity | 1500 m³/hr |
| Noise Level | 52 Decibels |
| Control Type | Touch & Gesture Control, 9 Speed |
| Power | 240V, 130 Watts (Annual Energy Consumption) |
| LED Lights | 2 LED Rectangle Lights |
| Finish | Filterless Matt Black Finish |
| Oil Collector | Black Powder Coated, Built-In |
| Dimensions (LxWxH) | 41D x 75W x 43.5H Centimeters |
| Item Weight | 11.8 Kilograms |
| Ventilation Type | Ducted/Recirculating (Ductless) |
| Special Features | Auto Clean, Built-In Oil Collector, LED Lighting, Noise Reduction |
9. Warranty and Support
For warranty information, please refer to the warranty card included with your product or visit the official Faber website. Keep your purchase receipt as proof of purchase.
For technical assistance, service requests, or inquiries, please contact Faber customer support:
- Manufacturer: Franke Faber India Pvt.Ltd
- Contact Number: 1800-209-3484
When contacting support, please have your product model number (320.0728.331) and purchase date available.
