Introduction
Thank you for choosing the Yaheetech Fillable Mobile Umbrella Stand. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new umbrella stand. Please read these instructions carefully before use and retain them for future reference.
This outdoor umbrella stand is designed to provide stable support for your patio umbrella. It features a fillable base for added weight, lockable wheels for easy mobility, and durable construction from HDPE for outdoor use.
Product Components
Before assembly, ensure all components are present. The package typically includes:
- 1 x Umbrella Stand Base
- 1 x Umbrella Pole Holder
- 4 x Lockable Wheels (may be pre-attached or separate)
- 2 x Thumb Screws for pole securing
- Instruction Manual (this document)
If any parts are missing or damaged, please contact Yaheetech customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 593198 |
| Material | HDPE (High-Density Polyethylene) |
| Assembled Dimensions (L x W x H) | 56.5 cm x 56.5 cm x 43 cm (22.24" x 22.24" x 16.93") |
| Empty Weight | 5.4 kg (11.88 lbs) |
| Water Capacity | 37 Liters (approx. 37.2 kg / 82 lbs) |
| Sand Capacity | Approx. 59.9 kg (132 lbs) |
| Water-Sand Mix Capacity | Approx. 55.8 kg (123 lbs) |
| Suitable Umbrella Pole Diameter | 1.5 inches (38mm) and 1.9 inches (48mm) |
| Wheels | 4 lockable universal wheels |
Note: Please allow for a measurement deviation of ± 1 cm.
Figure 1: Product Dimensions.
Safety Information
- Always ensure the base is filled to its maximum capacity with water, sand, or a water-sand mixture for optimal stability, especially in windy conditions.
- Lock all four wheels when the umbrella stand is in its desired position to prevent unintended movement.
- Do not attempt to move the stand with an open umbrella, especially in windy conditions. Close the umbrella before relocating the stand.
- Regularly check the thumb screws for tightness to ensure the umbrella pole is securely fastened.
- Avoid placing the umbrella stand on uneven surfaces.
- Keep children and pets away from the umbrella stand during movement or strong winds.
- The rounded corners and edges are designed for safety; however, exercise caution during handling.
Setup and Assembly
- Unpack Components: Carefully remove all parts from the packaging. Verify that all components listed in the "Product Components" section are present.
- Position the Base: Place the empty umbrella stand base in your desired outdoor location.
- Fill the Base:
Locate the top water inlet (usually a cap on the top surface). Open it. You can fill the base with:
- Water (up to 37 Liters / 82 lbs)
- Sand (up to 132 lbs)
- A mixture of water and sand (up to 123 lbs)
For maximum stability, fill the base completely. Once filled, securely close the inlet cap to prevent leakage.
Figure 2: Top water inlet for filling and side drainage outlet for emptying.
- Insert Umbrella Pole: Insert your patio umbrella pole into the central holder of the stand. The stand is suitable for umbrella poles with diameters of 1.5 inches (38mm) and 1.9 inches (48mm).
Figure 3: Umbrella pole holder with thumb screws.
- Secure Umbrella Pole: Tighten the two thumb screws on the pole holder firmly against the umbrella pole to ensure it is stable and does not wobble.
Figure 4: Tightening the thumb screws to secure the umbrella.
- Lock Wheels: Once the stand is in its final position and the umbrella is secured, engage the locks on all four wheels to prevent accidental movement.
Figure 5: Close-up of the lockable wheels.
Operating Instructions
- Moving the Stand: To move the umbrella stand, first close the umbrella. Then, unlock all four wheels. Carefully push or pull the stand to the new desired location. Once positioned, lock all four wheels again to secure the stand.
- Using the Umbrella: Once the stand is securely in place and the umbrella pole is tightened, you may open your patio umbrella. Always close the umbrella when not in use or during strong winds to prevent damage to the umbrella and stand.
Figure 6: Umbrella stand in use with an open umbrella.
Maintenance
- Cleaning: Clean the umbrella stand regularly with a damp cloth and mild soap. Avoid abrasive cleaners or harsh chemicals that could damage the HDPE material.
- Seasonal Storage: If storing the umbrella stand for an extended period, especially during winter, it is recommended to empty the filling material (water/sand). To drain water, open the side drainage outlet (refer to Figure 2). Ensure the stand is completely dry before storing to prevent mold or mildew. Store in a cool, dry place.
- Wheel Inspection: Periodically check the wheels for any debris or damage. Clean the wheels as needed to ensure smooth movement.
- Screw Tightness: Occasionally check and retighten the thumb screws that secure the umbrella pole to maintain stability.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Umbrella stand is unstable or tips over easily. | Base not sufficiently filled; wheels not locked; umbrella too large for stand; strong winds. | Ensure base is filled to maximum capacity. Lock all four wheels. Close umbrella in strong winds. Verify umbrella size is appropriate for the stand's capacity. |
| Umbrella pole wobbles in the holder. | Thumb screws are loose; incorrect pole diameter. | Tighten both thumb screws firmly. Ensure your umbrella pole diameter is compatible (1.5" or 1.9"). |
| Wheels are difficult to move or lock. | Debris in wheels; mechanism jammed; wheels are locked. | Clean any debris from the wheels. Ensure wheels are unlocked before attempting to move. Apply a silicone-based lubricant if necessary. |
| Base is leaking. | Inlet/drainage caps not securely closed; damage to the base. | Ensure all caps are tightly sealed. Inspect the base for cracks or damage. If damaged, contact customer support. |
Warranty and Support
Yaheetech products are manufactured to high-quality standards. For warranty information, product support, or to report missing/damaged parts, please contact Yaheetech customer service directly. Please have your model number (593198) and purchase details available when contacting support.
You can often find contact information on the Yaheetech official website or through your retailer's customer service portal.