1. Introduction
This manual provides instructions for setting up and operating your Generisch TV98 ATV H618 Smart 8K Android 14 TV Stick. This device transforms your television into a smart entertainment hub, offering access to a wide range of streaming services and applications independently of your internet provider.
The TV98 ATV H618 features an Allwinner H618 Quad Core ARM Cortex A53 CPU, Mali G31 GPU, 2GB DDR3 RAM, 16GB eMMC storage, dual-band Wi-Fi 6 (2.4G/5G), Bluetooth 5.0, and supports 8K UHD video output via HDMI 2.0A. It runs on Android 14.0, providing a versatile platform for media consumption and app installation from the Google Play Store or via .apk files.
Image 1.1: The TV98 ATV H618 Smart TV Stick and its accompanying voice remote control, displayed on the product packaging.
2. Package Contents
Verify that all items are present in your package:
- 1 x TV98 ATV H618 Smart TV Stick
- 1 x Voice Remote Control
- 1 x HDMI Cable
- 1 x USB Charging Cable (for power adapter)
- 1 x User Manual (this document)
Image 2.1: All components included in the TV98 ATV H618 Smart TV Stick package, including the stick, remote, HDMI cable, and USB charging cable.
3. Setup Guide
Follow these steps to set up your TV98 ATV H618 Smart TV Stick:
-
Connect to TV: Insert the TV98 ATV H618 stick directly into an available HDMI port on your television.
Image 3.1: Illustration of connecting the TV98 ATV H618 Smart TV Stick to a television's HDMI port and power source.
- Power Connection: Connect the USB charging cable to the TV stick and then to a power adapter (not included) or a USB port on your TV that provides sufficient power (DC 5V/2A recommended).
- Select HDMI Input: Turn on your TV and use its remote control to select the correct HDMI input source where the TV stick is connected.
-
Initial Setup & Network Connection:
Upon first boot, the device will guide you through the initial setup process. This includes selecting your language, connecting to your Wi-Fi network (2.4G or 5G), and logging into your Google account to access the Play Store.
Image 3.2: The side of the product packaging illustrating the three-step setup process: attach to TV, connect to internet, and start streaming.
- Remote Control Pairing (if necessary): The voice remote control should pair automatically. If not, follow the on-screen instructions or refer to the "Remote Control Infrared Learning" section below.
4. Operating Instructions
4.1 Basic Navigation
Use the directional pad (up, down, left, right) and the "OK" button on the voice remote control to navigate the Android TV interface. The "Back" button returns to the previous screen, and the "Home" button takes you to the main home screen.
4.2 App Installation
The TV98 ATV H618 runs on Android 14.0, providing access to the Google Play Store. You can download and install a wide variety of applications, including streaming services, games, and utilities.
- Via Google Play Store: Navigate to the Play Store icon on your home screen, search for your desired app, and select "Install".
- Manual Installation (.apk): For apps not available on the Play Store, you can download the .apk file from a trusted source onto a USB drive. Connect the USB drive to the TV stick and use a file manager app (downloadable from Play Store) to locate and install the .apk file. Ensure "Unknown sources" installation is enabled in the device settings if prompted.
4.3 Voice Control (Ok Google)
The included voice remote control supports "Ok Google" functionality. Press the dedicated voice button on the remote and speak your commands or search queries. For example, "Open YouTube," "Search for action movies," or "What's the weather?"
4.4 Media Playback
The TV stick supports various media formats and can play local media from a USB drive or TF card (up to 64GB). It also supports online streaming from installed applications like Netflix, YouTube, Hulu, and more.
- Local Media: Insert a USB drive or TF card into the designated port. Use a file manager app to browse and play your media files.
- Streaming Services: Open your preferred streaming app (e.g., Netflix, YouTube) and log in with your account to access content.
4.5 DLNA Function
The TV98 ATV H618 supports DLNA (Digital Living Network Alliance), allowing you to stream media content from compatible devices (like smartphones, tablets, or computers) on the same network directly to your TV stick.
To use DLNA, ensure your sending device and the TV stick are connected to the same Wi-Fi network. Use a DLNA-compatible app on your sending device to cast content to the TV stick.
4.6 Remote Control Infrared Learning
The voice remote control has an infrared learning function, allowing you to program certain buttons (e.g., TV power) to control your television directly.
- Enter Learning State: Press and hold the [TV] button on the TV98 remote for 3 seconds. The red indicator light will flash slowly, indicating it's in learning mode.
- Align Remotes: Point your TV's original infrared remote control directly at the TV98 remote's IR receiver (usually at the top).
- Learn Function: Press the button on your TV's remote that you wish to learn (e.g., Power button). The TV98 remote's red indicator light will flash rapidly and then go out, confirming successful learning.
- Repeat for Other Buttons: Repeat steps 1-3 for any other buttons you wish to program.
- Exit Learning State: Press the [TV] button again to exit learning mode.
Image 4.1: Visual guide demonstrating the infrared learning process for the TV98 ATV H618 remote control, allowing it to control basic TV functions.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or aerosols.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Software Updates: Periodically check for system updates in the device settings to ensure optimal performance and security.
- Avoid Obstructions: Ensure the TV stick has adequate ventilation and is not covered, as this can lead to overheating.
6. Troubleshooting
| Problem | Possible Solution |
|---|---|
| No power/Device not turning on |
|
| No signal on TV screen |
|
| Wi-Fi connection issues |
|
| Remote control not responding |
|
| App crashes or slow performance |
|
7. Specifications
| Model Name | TV98 H618 8K |
| Model Number | TV98H618 |
| Brand | Generisch |
| Operating System | Android 14.0 |
| CPU | Allwinner H618 Quad Core ARM Cortex A53 |
| GPU | Mali G31 OPenGL3.2 |
| RAM | 2GB DDR3 |
| Internal Storage | 16GB eMMC |
| Wi-Fi | 802.11b/g/n 2.4G/5G Dual-band Wi-Fi 6 |
| Bluetooth | BT 5.0 |
| Video Output | HDMI 2.0A, supports 8K@60fps, 4K@60fps |
| Video Codecs | VP9 Profile 2, H.265 Main10, AVS2, H.264, MPEG-4, MPEG-2, MPEG-1, Xvid, Sorenson Spark, VP8, AVS/AVS+, WMV9/VC1 |
| Audio Support | MP3, AAC, WMA, RM, FLAC, OGG, 7.1/5.1 downmixing, SPDIF/IEC958, PCM |
| Image Support | HD JPEG, BMP, GIF, PNG, TIF |
| Ports | 1x HDMI, 1x USB Host, 1x IR Receiver, 1x TF Card Slot (up to 64GB) |
| Power Input | DC 5V/2A |
| Dimensions (L x W x H) | 11 x 3 x 1 cm |
| Weight | 300 Grams |
| Special Features | DLNA, Chromecast built-in, Google Play Assistant |
Image 7.1: Detailed view of the Allwinner H618 processor, highlighting its quad-core CPU and Mali-G31 GPU, which power the TV stick's performance.
8. Warranty and Support
Spare Parts Availability: 2 Years
Software Updates: Information not available regarding guaranteed software update period.
For further assistance or technical support, please refer to the contact information provided by your retailer or the manufacturer, Chua Import & Entertainment.