Introduction
Welcome to your new PELONIS Pedestal Fan. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting. Please read it thoroughly before using your fan.
Important Safety Instructions
- Read all instructions before using this fan.
- Do not operate any fan with a damaged cord or plug.
- Do not run cord under carpeting.
- Always unplug the fan before cleaning or servicing.
- Keep children and pets away from the fan during operation.
- Ensure the fan is placed on a stable, level surface.
What's in the Box
Your PELONIS Pedestal Fan package includes the following components:
- Fan Head Assembly
- Adjustable Pole (2 sections)
- Base
- Remote Control (with 2 AAA batteries)
- User Manual
Image: All components of the PELONIS Pedestal Fan, including the fan head, two pole sections, base, remote control, and user manual.
Setup Guide
Assembly
- Attach Pole to Base: Screw the lower pole section into the fan base until secure.
Image: The fan base with the lower pole section attached, illustrating the initial assembly step.
- Attach Fan Head to Pole: Securely screw the fan head assembly onto the top of the pole. Ensure the power cord is routed correctly.
Image: The fully assembled PELONIS Pedestal Fan, ready for operation.
- Adjust Height (Optional): The fan can be used at two different heights (23.2 inches or 42.5 inches) by removing or adding the middle pole section.
Image: The fan demonstrating its adjustable height feature, showing both the shorter tabletop configuration and the taller pedestal configuration.
- Insert Remote Batteries: Open the battery compartment on the remote control and insert the two AAA batteries provided.
Placement
Place the fan on a firm, level surface. Ensure there is adequate space around the fan for optimal air circulation and oscillation.
Operating Instructions
Control Panel and Remote
The fan can be controlled using the touch-sensitive control panel on the unit or the included remote control.
Image: A close-up of the fan's control panel and the remote control, highlighting the various buttons and indicators.
Power On/Off
- Press the Power button (⑂) on the control panel or remote to turn the fan on or off.
Wind Speeds and Modes
- Wind Speed: Short press the fan speed button (☸) to cycle through 3 different wind speeds.
- Turbo Mode: Long press the fan speed button (☸) for 3 seconds to activate Turbo Circulation Mode for maximum airflow.
Video: This video demonstrates how to operate the Pelonis AeroFan, including power on/off, adjusting wind speeds, and activating different modes.
Oscillation
- Vertical Oscillation: Short press the vertical oscillation button (↻) to start or stop 135° vertical oscillation.
- Horizontal Oscillation: Short press the horizontal oscillation button (↺) to start or stop 90° horizontal oscillation.
- The fan features OmniFlow Auto-Oscillation for ultra-wide coverage.
Image: The fan illustrating its 135° vertical and 90° horizontal auto-oscillation capabilities.
Timer Function
- Short press the Timer button (⏱) to set the fan to automatically turn off after 1, 2, or 4 hours.
- To set a timer for 5, 6, or 7 hours, combine the 4-hour setting with the 1-hour, 2-hour, or both settings respectively.
Memory Function
- The fan's memory function automatically restores your previous speed, mode, and timer settings after a power outage.
Maintenance and Cleaning
General Cleaning
- Always unplug the fan from the power outlet before cleaning.
- Use a soft, damp cloth to wipe the exterior surfaces of the fan.
- Do not use abrasive cleaners or solvents.
Disassembly for Deep Cleaning
For thorough cleaning of the fan blades and grilles, follow these steps:
- Unplug the fan.
- Unscrew the screws at the bottom of the front grille with a screwdriver.
- Rotate the front grille lock following the unlock arrow direction to remove it.
- Hold the fan blade and rotate the blade lock clockwise to remove it.
- Wash the fan blades and grilles with clean water. Wipe the fan with a damp cloth.
- Reinstall in reverse order. Ensure the blade matches the fan shaft shape.
- Reinstall the front grille. Align the small triangle on the grille with the lock position and rotate to secure.
- Screw back the front grille screws to complete assembly.
Video: This video provides a step-by-step guide on how to disassemble and clean the Pelonis AeroFan for optimal performance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on | Not plugged in; Power outage; Damaged cord/plug | Check power connection; Restore power; Contact support |
| Weak airflow | Fan blades are dirty; Incorrect speed setting | Clean fan blades; Increase speed setting |
| Fan is noisy | Loose parts; Obstruction in fan | Check for loose parts and tighten; Remove any obstructions |
| Remote not working | Batteries are dead; Obstruction between remote and fan | Replace batteries; Remove obstruction |
Product Specifications
- Brand: PELONIS
- Model Name: FG18-23MRL
- Item Model Number: PSFAS07R2ALG
- Product Dimensions: 11.9"D x 13.4"W x 42"H
- Item Weight: 12.98 pounds
- Power Source: AC
- Wattage: 35 watts
- Voltage: 120V
- Noise Level: 23 dB
- Air Flow Capacity: 900 Cubic Feet Per Minute (CFM)
- Speed: 22 Feet Per Second (ft/s)
- Number of Blades: 3
- Control Method: Touch, Remote Controlled
- Special Features: Quiet Operation, Pedestal Base, Oscillating (135° Vertical, 90° Horizontal), 7H Timer, Memory Function, Adjustable Height
- Batteries: 2 AAA batteries required (included for remote)
- Country of Origin: China
Warranty and Support
For warranty information or technical support, please visit the official PELONIS website or contact their customer service.
Visit the PELONIS Store: PELONIS Store on Amazon
