Rubicon DX11 Reclining Foldable Electric Wheelchair User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation, maintenance, and care of your Rubicon DX11 Reclining Foldable Electric Wheelchair. Please read it thoroughly before initial use and retain it for future reference.

Product Overview

The Rubicon DX11 is a versatile electric wheelchair designed for adults, offering enhanced mobility and comfort. Key features include:

• Reclining Capability: Manually adjustable backrest from 90° to 160° with a detachable and adjustable headrest for personalized comfort.
• Powerful Dual Motors: Equipped with two 250W motors (600W total) for impressive torque and all-terrain navigation.
• User-Friendly Design: Features both electric and manual modes, a 360-degree joystick that can be mounted on either side, and convenient storage options.
• Long Range Battery: High-quality Lithium-Ion cells provide an extended range of up to 25 miles on a single charge.
• Compact and Portable: Folds in approximately 3 seconds to a height of only 13 inches, making it easy to transport and store.
• All-Terrain Performance: Designed to handle various surfaces including grass, ramps, sand, mud, snow, and bumpy roads.
• Small Turning Radius: A 20-inch turning radius allows for effortless maneuvering in tight spaces.

2. Setup and Initial Assembly

Your Rubicon DX11 wheelchair comes largely pre-assembled. Follow these steps for initial setup:

1. Unboxing: Carefully remove the wheelchair and all components from the packaging.
2. Unfolding: Gently unfold the wheelchair until it locks into its open position. Ensure all locking mechanisms are secure.
3. Install Headrest: Attach the adjustable headrest to the backrest frame.
4. Install Footrests: Secure the footrests into their designated slots.
5. Joystick Attachment: Mount the 360-degree joystick on either the left or right armrest and connect the cable securely.
6. Battery Installation: Insert the Lithium-Ion battery pack(s) into their compartment(s) and ensure they are properly connected.

Figure 2.1: The Rubicon DX11 Electric Wheelchair ready for use.

3. Operating Instructions

Joystick Control

The 360-degree joystick provides intuitive control over the wheelchair's movement and speed. Familiarize yourself with its functions:

• Power On/Off: Press the power button to turn the wheelchair on or off.
• Speed Adjustment: Use the '+' and '-' buttons to increase or decrease the speed settings.
• Directional Control: Move the joystick forward, backward, left, or right to steer the wheelchair.
• Horn: Press the horn button for audible alerts.
• SOS Function: Press the SOS button for emergency assistance.
• Mute Function: Press the mute button to silence system sounds.

Switching Between Electric and Manual Modes

The DX11 offers flexibility with both electric and manual operation:

• Electric Mode: Ensure the red levers on the motors are pushed inward (engaged) for powered operation.
• Manual Mode: Flip the red levers on the motors outward (disengaged) to allow the wheelchair to be pushed manually like a traditional wheelchair.

Reclining Function

Adjust the backrest to your desired angle for optimal comfort:

• The backrest can be manually adjusted from 90° (upright) to 160° (reclined).
• Utilize the detachable and adjustable headrest for additional support.

Figure 3.1: The wheelchair's reclining feature, designed for user comfort.

Folding and Unfolding

The DX11 is designed for quick and easy folding:

• To fold, ensure the armrests are lifted and the footrest is folded flush.
• Follow the specific folding mechanism to collapse the wheelchair in approximately 3 seconds.
• Reverse the process to unfold and lock securely into place.

Figure 3.2: The wheelchair in its folded state, highlighting its portability.

4. Battery Information and Charging

The Rubicon DX11 is powered by high-quality Lithium-Ion batteries, offering reliable performance.

Charging the Battery

• Use the provided charger and off-vehicle charging cable.
• Connect the charger to the battery pack and then to a standard power outlet.
• Allow the battery to fully charge before initial use and after each significant period of use.

Battery Range

A fully charged battery provides an extended range of up to 25 miles, ideal for day-long outings.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your wheelchair.

Cleaning

• The breathable, removable high-density single-cell foam seat can be easily cleaned.
• Wipe down the frame and other surfaces with a damp cloth. Avoid using harsh chemicals.

General Care

• Periodically check all fasteners and connections to ensure they are secure.
• The aircraft-grade aluminum alloy construction features a weatherproof coating, but avoid prolonged exposure to extreme weather conditions.

6. Troubleshooting

If you encounter any issues, refer to the following common troubleshooting tips:

• Wheelchair not powering on: Ensure the battery is fully charged and properly connected. Check the power button on the joystick.
• Wheelchair not moving in electric mode: Verify that the motors are engaged (red levers pushed inward). Check joystick connections.
• Unusual noises: Inspect wheels for obstructions and ensure all components are securely fastened.

For persistent issues, contact customer support.

7. Specifications

8. Warranty and Support

Warranty Information

The Rubicon DX11 comes with the following warranty:

• Frame: 1-year warranty
• Motor and Joystick Controller: 1-year warranty
• Battery: 6-month warranty

As a US (California-based) company, Rubicon provides Gold Standard Customer Support. For any inquiries or assistance, please refer to your purchase documentation for contact details.