XINFUTE RCH-RTY2-0
Contents
Instruction Manual for XINFUTE Air Conditioner Remote Control
Model: RCH-RTY2-0 / RCH-RTY2-O
Product Overview
This manual provides instructions for the XINFUTE RCH-RTY2-0 / RCH-RTY2-O Air Conditioner Remote Control, designed as a direct replacement for Dzitsu Air Conditioner Remote Controls. It is made from durable ABS material and offers straightforward operation without the need for complex pairing.

Figure 1: Front view of the XINFUTE RCH-RTY2-0 remote control. The remote features a clear LCD display at the top, showing temperature and mode indicators. Below the display are various control buttons, including 'MODE', 'FAN', 'TURBO', 'ON/OFF', 'MUTE', 'SLEEP', 'LIGHT', 'TIMER ON', 'TIMER OFF', 'CLOCK', 'ECO', and 'IFEEL'. The primary color is white with light green and yellow accents on some buttons.
Setup and Battery Installation
The XINFUTE RCH-RTY2-0 remote control is designed for immediate use without any pairing process. Simply install the batteries to begin operation.
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards to open it.
- Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Note: Batteries are not included with the remote control and must be purchased separately.

Figure 2: Back view of the remote control with the battery cover removed, revealing the battery slots. The model number "RCH-RTY2-0" is clearly visible on the back casing above the battery compartment. This image demonstrates where to insert the two AAA batteries.
Operating Instructions
The remote control provides comprehensive functionality for your Dzitsu Air Conditioner. Familiarize yourself with the buttons for optimal use.
- ON/OFF: Press to power the air conditioner on or off.
- MODE: Cycles through various operating modes (e.g., Cool, Heat, Fan, Dry, Auto).
- FAN: Adjusts the fan speed.
- TURBO: Activates a rapid cooling or heating function for quick temperature changes.
- TEMP ▲/▼: Adjusts the desired temperature up or down.
- MUTE: Silences the air conditioner's operational beeps.
- SLEEP: Activates sleep mode, which adjusts temperature gradually for comfortable sleep.
- LIGHT: Controls the display light on the air conditioner unit.
- TIMER ON: Sets a time for the air conditioner to turn on automatically.
- TIMER OFF: Sets a time for the air conditioner to turn off automatically.
- CLOCK: Sets the current time on the remote's display.
- ECO: Activates energy-saving mode.
- IFEEL: Activates the "I Feel" function, which senses the temperature at the remote's location.

Figure 3: Angled view of the XINFUTE RCH-RTY2-0 remote control. This perspective shows the slim profile and the arrangement of buttons, including the main power, mode, fan, and temperature controls, as well as the lower row of specialized functions.
Maintenance
To ensure the longevity and proper functioning of your remote control, follow these simple maintenance guidelines:
- Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the surface or internal components.
- Battery Replacement: Replace batteries when the remote's response becomes sluggish or the display dims. Always replace both batteries at the same time with new ones of the same type (AAA).
- Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage. Store in a cool, dry place away from direct sunlight.
- Avoid Drops: Protect the remote from physical impact. Dropping the remote can damage internal circuitry or the LCD screen.
Troubleshooting
If you experience issues with your remote control, please refer to the following common troubleshooting steps:
- Remote Not Responding:
- Check if the batteries are inserted correctly with the correct polarity (+/-).
- Replace old batteries with new AAA batteries.
- Ensure there are no obstructions between the remote control and the air conditioner's receiver.
- Confirm the remote is pointed directly at the air conditioner unit.
- Display Not Working:
- Replace the batteries. A dim or blank display often indicates low battery power.
- Air Conditioner Not Responding to Specific Commands:
- Verify that the air conditioner unit is powered on and in a receptive state.
- Ensure the remote control is compatible with your specific Dzitsu air conditioner model. While this remote is designed for Dzitsu, some older or very new models might have different protocols.
Since this remote control requires no pairing, most issues are related to battery power or line-of-sight.
Specifications
| Feature | Detail |
|---|---|
| Model Number | RCH-RTY2-0 |
| Brand | XINFUTE |
| Material | ABS Material |
| Color | As Shown (Typically White) |
| Product Dimensions | 4 x 3 x 1 inches |
| Item Weight | 2.4 ounces |
| Batteries Required | 2 x AAA batteries (not included) |
| Max Number of Supported Devices | 1 |
| Manufacturer | XINFUTE |
| Country of Origin | China |
| Date First Available | January 21, 2025 |
Warranty and Support
Your XINFUTE RCH-RTY2-0 remote control comes with a commitment to quality and customer satisfaction.
- Warranty: Enjoy a one-year warranty on all purchases from the date of receipt. This warranty covers manufacturing defects and ensures the product functions as intended under normal use.
- Customer Support: All goods are inspected before shipment. If you are not satisfied with your purchase for any reason, or if you encounter any issues, please contact the seller (Xinfute) within 24 hours of receiving your product. We are committed to resolving any concerns promptly.
For support, please refer to the contact information provided by your retailer or the seller, Xinfute, on the platform where the purchase was made.
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.