1. Introduction
Thank you for choosing the DOGLinsen Bark Collar with Remote. This device is designed to assist in training your dog and managing excessive barking through a combination of beep, vibration, and static shock modes. Please read this manual thoroughly before use to ensure proper operation and the safety of your pet.
2. Package Contents
The package includes the following items:
- Remote Control (x1)
- Receiver (x1)
- Collar Strap (x1)
- Lanyard (x1)
- USB Charging Cable (x1)
- User Manual (x1)
- Box (x1)
- Metal Contact Points (x4)
- Black Rubber Sleeves (x4)
- Test Lamp (x1)
3. Product Overview
The DOGLinsen Bark Collar system consists of a receiver unit worn by the dog and a remote control for manual operation. The receiver is designed to be compact and durable, while the remote features an intuitive display and control buttons.
4. Setup
4.1 Charging the Devices
Before first use, fully charge both the receiver and the remote control using the provided USB charging cable. A full charge ensures optimal performance and battery life.
4.2 Attaching the Collar Strap
Thread the collar strap through the receiver unit. Ensure the contact points are securely attached to the receiver for proper function.
4.3 Fitting the Collar
Proper fit is crucial for the collar's effectiveness and your dog's comfort. The collar should be snug enough for the contact points to touch the dog's skin, but not so tight as to cause discomfort. You should be able to fit two fingers comfortably between the collar and your dog's neck.
4.4 Testing the Receiver Power
To check the battery level of the receiver, press the power button on the receiver twice in a row. You will hear a series of beeps indicating the battery charge level. Refer to the table below for interpretation:
| Beep Times | Battery Charge |
|---|---|
| 5 Beeps | Above 80% |
| 4 Beeps | Above 60% |
| 3 Beeps | Above 40% |
| 2 Beeps | Above 20% |
| 1 Beep | Below 20% |
Watch the video below for a demonstration on how to test the receiver's power.
Video: A demonstration on how to test the power level of the DOGLinsen Bark Collar receiver by pressing the power button twice and interpreting the beep signals.
5. Operating Modes
The DOGLinsen Bark Collar offers three primary operating modes to suit various training needs:
- Bark Mode: Specifically designed to address and correct excessive barking.
- Dog Training Mode: For general behavior correction and training commands using the remote.
- All-Inclusive Mode: Combines both bark correction and remote training functionalities.
5.1 Training Modes Details
The remote control allows for precise adjustment of training stimuli:
- Beep: An audible tone to get your dog's attention.
- Vibration: Adjustable from levels 1-100, providing a tactile stimulus.
- Static Shock: Adjustable from levels 1-100, delivering a mild static correction.
The automatic bark mode features 5 levels of sensitivity, allowing you to select the appropriate level for your dog's barking habits.
5.2 Protection Mode
The automatic bark collar intelligently detects and responds to excessive barking. To prevent over-correction, if the anti-bark collar is activated 7 times in a row, it will automatically pause for 30 seconds.
6. Remote Control Features
The remote control provides a long operating range and efficient power management.
- Remote Range: The remote control has a range of up to 2800 feet, allowing for effective training both indoors and outdoors.
- Battery Life: When fully charged, the smart anti-barking collar can last up to 30 days with remote use and up to 90 days with only the receiver active.
7. Durability and Compatibility
7.1 IP67 Waterproof Rating
The receiver unit of the bark training collar is IP67 waterproof, meaning it can withstand various weather conditions and even submersion in water. This allows for use in rainy weather or during water activities. Please note that the remote control should be kept away from water.
7.2 Dog Size Compatibility
The DOGLinsen Bark Collar is designed to fit a wide range of dog sizes. It is suitable for dogs with neck sizes from 8 to 27 inches and weights between 10 to 110 lbs, accommodating small, medium, and large breeds.
8. Maintenance
Proper maintenance ensures the longevity and effectiveness of your bark collar.
- Cleaning: The collar strap can be hand washed. Regularly clean the receiver unit and contact points to prevent dirt buildup, which can affect performance.
- Contact Points: Periodically check the contact points for wear and tear. Ensure they are clean and making proper contact with your dog's skin.
- Storage: When not in use for extended periods, store the collar and remote in a cool, dry place.
9. Troubleshooting
If you encounter issues with your DOGLinsen Bark Collar, refer to the following common problems and solutions:
- Collar not responding to remote: Ensure both devices are charged and turned on. Re-pair the remote and receiver if necessary (refer to pairing instructions in the full PDF manual).
- Collar not correcting barking: Check the collar fit to ensure contact points are touching the skin. Adjust sensitivity levels in automatic mode.
- Short battery life: Ensure devices are fully charged. Reduce frequency of use or intensity levels if possible.
- No beep/vibration/shock: Test the receiver power as described in Section 4.4. Ensure the mode and intensity levels are set correctly on the remote.
For more detailed troubleshooting, please consult the full user manual available as a PDF here.
10. Specifications
| Feature | Specification |
|---|---|
| Model Name | Bark Collar with Remote-PD 523-TIO-1 (Blue) |
| Item Weight | 8.4 ounces |
| Item Package Dimensions | 6.06 x 3.74 x 2.32 inches |
| Batteries | 1 Lithium Polymer battery required (included) |
| Color | Blue |
| Size | Adjustable (8 to 27 inches neck size) |
| Material | Nylon, Polyester |
| Waterproof Rating | IP67 (Receiver) |
| Remote Range | Up to 2800 feet |
| Training Modes | Beep, Vibration (1-100), Static Shock (1-100), Auto Bark Mode (5 sensitivity levels) |
| Target Audience | Dogs (10 to 110 lbs) |
11. Warranty and Support
The DOGLinsen Bark Collar comes with a 2-Year Manufacturer Warranty. For warranty claims, technical support, or any inquiries not covered in this manual, please contact DOGLinsen customer service through the retailer where the product was purchased or visit the official DOGLinsen store on Amazon: DOGLinsen Store.
