ASHATA 8 Channels Drone Simulator Controller User Manual

1. Introduction

The ASHATA 8 Channels Drone Simulator Controller is designed to provide a realistic and immersive flight experience for FPV drone enthusiasts and beginners. This controller allows users to practice and refine their drone piloting skills using various mainstream FPV simulator software. Its ergonomic design and precise joysticks ensure a responsive and enjoyable simulation session.

2. Safety Information

• This device is intended for use with flight simulator software only. It does not control physical drones.
• Keep the controller away from water and excessive moisture.
• Avoid exposing the controller to extreme temperatures or direct sunlight.
• Do not attempt to disassemble or modify the controller, as this may void the warranty and cause damage.
• Use only the provided or compatible Type-C USB cable for connection and power.

3. Package Contents

Please check the package contents upon receipt. If any items are missing or damaged, contact your retailer.

• 1 x ASHATA 8 Channels Drone Simulator Controller
• 1 x Type-C USB Cable (may vary by package)

4. Product Overview

The ASHATA Drone Simulator Controller features an ergonomic design similar to a gaming controller, equipped with two precise joysticks and multiple switches for comprehensive control within simulator environments.

Figure 4.1: Front view of the ASHATA 8 Channels Drone Simulator Controller. This image shows the red controller with its two main joysticks and a power button in the center. A drone is visible in the blurred background, illustrating the product's purpose.

Figure 4.2: Back view of the ASHATA 8 Channels Drone Simulator Controller. The back of the red controller is shown, featuring a USB logo, 'MADE IN CHINA' text, and a battery compartment cover (note: the device is USB powered, the compartment is empty).

Figure 4.3: Close-up of one of the joysticks on the ASHATA Drone Simulator Controller. This image highlights the metallic, textured stick end and the surrounding black gimbal mechanism, emphasizing the controller's precision components.

Key Features:

• Nano Joysticks: Ergonomic stick ends with high position accuracy and fast response sensitivity.
• 8 Channels: Provides extensive control options for various simulator functions.
• Type-C USB Interface: Modern and convenient connectivity.
• Plug and Play: Simple setup for immediate use.
• Joystick Calibration: Supports calibration for optimal performance.

5. Setup

5.1 Connecting the Controller

1. Locate the Type-C USB port on the top edge of the controller.
2. Connect one end of the Type-C USB cable to the controller's port.
3. Connect the other end of the USB cable to an available USB port on your computer.
4. The controller is USB powered and should be recognized automatically by your operating system as a joystick or game controller.

Figure 5.1: Close-up view of the 'SIMULATOR' labeled port and a toggle switch on the ASHATA Drone Simulator Controller. This shows the Type-C USB input interface for connecting to a computer.

5.2 Software Compatibility

The ASHATA Drone Simulator Controller is compatible with mainstream FPV drone simulator software, including but not limited to:

• DRS
• DRL
• DCL
• TryP
• Freerider
• Liftoff

Ensure your chosen simulator software is installed and up to date on your computer.

6. Operating Instructions

6.1 Basic Operation

1. Connect the controller to your computer as described in Section 5.1.
2. Launch your preferred FPV drone simulator software.
3. Within the simulator software, navigate to the controller or joystick settings.
4. Select the ASHATA 8 Channels Drone Simulator Controller as your input device.
5. Follow the on-screen instructions within the simulator to map the controller's joysticks and switches to the desired flight controls (e.g., throttle, roll, pitch, yaw, arming, mode switches).
6. Perform any necessary in-software calibration if prompted.

6.2 Joystick Calibration

The controller supports joystick calibration to ensure optimal accuracy and responsiveness. While specific calibration steps may vary slightly depending on your operating system and simulator software, the general process involves:

1. Accessing your computer's joystick or game controller settings (e.g., 'Game Controllers' in Windows, 'Joystick Calibration' in macOS System Settings).
2. Selecting the ASHATA controller from the list of connected devices.
3. Following the prompts to move the joysticks through their full range of motion and center them.
4. Saving the calibration settings.

Refer to your operating system's documentation or your simulator software's help section for detailed calibration instructions.

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the surface of the controller. Do not use liquid cleaners or abrasive materials.
• Storage: Store the controller in a cool, dry place, away from direct sunlight and extreme temperatures.
• Temperature and Humidity: Operate and store the controller within the specified ranges: Operating Temperature: -10°C to 60°C, Humidity Range: 20% to 95%.
• Firmware: Firmware updates are not available for this device.

8. Troubleshooting

• Controller Not Recognized:
  • Ensure the USB cable is securely connected to both the controller and the computer.
  • Try connecting to a different USB port on your computer.
  • Test with a different Type-C USB cable if available.
  • Restart your computer.
• Controls Unresponsive in Simulator:
  • Verify that the controller is selected as the input device within your simulator software's settings.
  • Check the control mapping within the simulator to ensure joysticks and switches are correctly assigned.
  • Perform joystick calibration as described in Section 6.2.
  • Ensure the simulator software is up to date.
• Inaccurate Joystick Movement:
  • Recalibrate the joysticks using your operating system's or simulator software's calibration tools.
  • Ensure no physical obstructions are affecting joystick movement.

9. Specifications

10. Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.