Edifier ES20 Portable Bluetooth Speaker User Manual

Introduction

This manual provides essential information for the safe and efficient use of your Edifier ES20 Portable Bluetooth Speaker. Please read it thoroughly before operating the device.

The Edifier ES20 is a compact and powerful portable Bluetooth speaker designed for both indoor and outdoor use. It features IP67 dustproof and waterproof rating, up to 15 hours of playtime, Bluetooth V5.4 connectivity, and an ambient light system.

What's in the Box

Verify that all items listed below are included in your package:

Edifier ES20 Speaker x 1
Strap x 1
USB-C to USB-C Cable x 1
Quick Start Guide x 1
Important Safety Instructions x 1

Contents of the Edifier ES20 package including speaker, strap, USB-C cable, quick start guide, and safety instructions.

Image: Contents of the Edifier ES20 package.

Setup

Power On/Off

To power on or off the speaker, press and hold the power button located on the top panel for approximately 1.5 seconds. The indicator lights will illuminate or turn off accordingly.

If the speaker is not charging and remains inactive for 30 minutes (no audio playback or user operation), it will automatically power off. This feature can be disabled via the EDIFIER ConneX app under "My Device" > "Power saving mode".

Video: Demonstrates powering the Edifier ES20 speaker on and off, and disabling power saving mode via the app. (Relevant segment: 0:17 - 0:42)

Bluetooth Connection

The ES20 speaker supports connecting to two Bluetooth devices simultaneously.

Connecting One Device

When the speaker is powered on, it automatically enters Bluetooth pairing mode, indicated by a blinking blue light.
On your device (smartphone, tablet, etc.), enable Bluetooth and select "EDIFIER ES20" from the list of available devices.
Once connected, the indicator light will turn solid blue.
To disconnect from the current device, press and hold the "+" and "-" buttons simultaneously for 1.5 seconds.

The speaker will automatically reconnect to the last connected device when powered on again.

Connecting Two Devices Simultaneously

First, connect your primary device (Device A) to the speaker as described above.
Then, press and hold the "+" and "-" buttons on the speaker for 1.5 seconds to enter pairing mode again.
On your second device (Device B), select "EDIFIER ES20" from the Bluetooth list. The indicator will turn solid blue once connected.
To play audio from Device B, pause playback on Device A. The speaker will automatically switch to Device B.
To connect a different Bluetooth device, first disconnect the current device by pressing and holding the "+" and "-" buttons on the speaker for 1.5 seconds, then reconnect from your new device's Bluetooth list.

Video: Demonstrates Bluetooth connection for single and multiple devices. (Relevant segment: 0:43 - 2:18)

Bluetooth Stereo Pairing (TWS)

You can pair two ES20 speakers together for a true wireless stereo (TWS) sound experience.

Ensure both ES20 speakers are powered on and not connected to any other Bluetooth devices.
On the first ES20 speaker, double-press the POWER button. The white indicator will pulse slowly. This speaker will become the master (right channel).
On the second ES20 speaker, double-press the POWER button as well. It will also start pulsing. This speaker will become the slave (left channel).
Once paired, the indicator on the slave speaker will turn off, while the master's indicator will turn solid white.
Connect your device to the master speaker via Bluetooth. You can then control playback from the master speaker.
To exit stereo mode, double-press the POWER button on either the master or the slave speaker.

Two Edifier ES20 speakers shown side-by-side, illustrating Bluetooth stereo pairing.

Image: Two Edifier ES20 speakers ready for stereo pairing.

Video: Demonstrates Bluetooth stereo pairing between two ES20 speakers. (Relevant segment: 2:19 - 3:23)

Operating Instructions

Playback Control

Adjust Volume: Press the "+" or "-" button.
Skip Track: Press and hold the "+" button for the next track, or the "-" button for the previous track.
Pause/Resume Playback: Press the POWER button once.

Diagram showing the intuitive controls on the top panel of the Edifier ES20 speaker for volume, track skipping, power, and light effects.

Image: Intuitive controls on the top panel of the ES20 speaker.

Video: Demonstrates playback controls including volume adjustment and track skipping. (Relevant segment: 3:23 - 3:44)

Using the Ambient Light

The ES20 features an ambient light system with multiple modes:

Press the LIGHT EFFECT button (sun icon) to switch between different light modes (Breathing, Rainbow, Static, Glittering and Colorful, Emergency Light).
To enable/disable emergency lighting, double-press the LIGHT EFFECT button.
To turn off the lights completely, press and hold the LIGHT EFFECT button for 1.5 seconds.

Edifier ES20 speaker displaying various ambient light effects: Breathing, Rainbow, Static, Glittering and Colorful, and Emergency Light.

Image: Ambient Light System with various effects.

Video: Demonstrates how to use the ambient light feature. (Relevant segment: 3:44 - 4:05)

Using the Microphone

The ES20 has a built-in MEMS microphone for hands-free calling. When connected to your phone via Bluetooth:

Answer a Call: Press the POWER button once.
Hang Up: Press the POWER button again.
Reject a Call: Press and hold the POWER button.

Edifier ES20 speaker shown next to a smartphone displaying an incoming call, highlighting the built-in MEMS microphone feature.

Image: Built-in MEMS Microphone for calls.

Video: Explains how to use the microphone for calls. (Relevant segment: 4:05 - 4:23)

Using the EDIFIER ConneX App

For advanced features and customization, download the EDIFIER ConneX app. Connect your device to the speaker via Bluetooth, then open the app.

The app allows you to:

Control playback and volume.
Switch sound effects (Music, Game, Movie, Outdoor).
Customize light effects.
Upgrade firmware.
Access user manual and other settings.

Screenshots of the EDIFIER ConneX app interface showing options for sound effects, light effects, volume control, and other settings.

Image: EDIFIER ConneX App interface.

Video: Demonstrates how to use the EDIFIER ConneX app for various functions. (Relevant segment: 4:23 - 5:06)

Charging the Speaker

The ES20 speaker is equipped with a built-in Lithium Ion battery, providing up to 15 hours of continuous playtime on a single charge.

Connect the included USB-C to USB-C cable to the charging port on the side of the speaker.
Connect the other end of the cable to a USB power adapter (5V/2A output recommended).
The battery indicator lights on the top panel will show the charging status.
When fully charged, the battery indicator will turn solid white.

Close-up of the Edifier ES20 speaker's top panel showing the control buttons and battery indicator lights.

Image: Top panel controls and battery indicators.

Video: Demonstrates how to charge the ES20 speaker. (Relevant segment: 5:06 - 5:20)

Using the Strap

The ES20 comes with a strap for easy carrying and portability. Attach the strap to the designated loop on the side of the speaker.

Edifier ES20 speaker with an attached strap, held by a hand, demonstrating its portability.

Image: Edifier ES20 with attached strap for portability.

Video: Shows how to attach and use the carrying strap. (Relevant segment: 5:20 - 5:28)

Maintenance

Cleaning: Use a soft, dry cloth to clean the speaker. Do not use abrasive cleaners or solvents.
Water Exposure: The speaker is IP67 rated, meaning it is dustproof and can be submerged in up to 1 meter (3 feet) of water for up to 30 minutes. Ensure the charging port cover is securely closed before exposing it to water. After water exposure, dry the speaker thoroughly before charging.
Storage: Store the speaker in a cool, dry place away from extreme temperatures and direct sunlight.

Edifier ES20 speaker partially submerged in water, demonstrating its IP67 waterproof rating.

Image: Edifier ES20 demonstrating IP67 water resistance.

Troubleshooting

Problem	Solution
No sound	Ensure the speaker is powered on and charged. Check if the volume is turned up on both the speaker and your connected device. Verify that the speaker is correctly paired via Bluetooth.
Cannot pair via Bluetooth	Ensure the speaker is in pairing mode (blinking blue indicator). Turn off and on Bluetooth on your device. Try resetting the speaker to factory settings (see "Factory Reset" section). Ensure no other devices are actively connected to the speaker.
Poor sound quality	Move the speaker closer to your device to reduce interference. Ensure there are no obstructions between the speaker and your device. Check the audio source quality.
Speaker automatically turns off	The speaker has an auto-off feature after 30 minutes of inactivity (no audio/user operation) if not charging. Disable this in the EDIFIER ConneX app if desired. The battery might be low. Charge the speaker.

Specifications

Feature	Detail
Model Name	ES20
Total Output Power	6W (RMS)
Driver Units	1.7'' (43mm) full-range driver, 2'' (55mm) passive bass radiator
Frequency Response	93Hz - 19kHz
Signal-to-Noise Ratio	≥ 85dB (A)
Bluetooth Version	V5.4
Audio Codecs	SBC
Battery Life	Up to 15 hours
Water/Dust Resistance	IP67
Dimensions (W × H × D)	90.4mm × 93.7mm × 49.7mm (3.55"D x 3.68"W x 1.95"H)
Net Weight	326g (1.01 pounds)
Material	Plastic

Image: Detailed specifications of the ES20 speaker.

Factory Reset

If you encounter persistent issues or wish to clear all settings, you can reset the speaker to its factory defaults:

Press and hold the "+" and "-" buttons on the speaker simultaneously for 5 seconds.
Alternatively, open the EDIFIER ConneX app, go to "My Device" > "Factory settings" and confirm the reset.

Video: Demonstrates how to perform a factory reset on the ES20 speaker. (Relevant segment: 5:28 - 5:51)

Warranty and Support

The Edifier ES20 Portable Bluetooth Speaker comes with a Limited Warranty. Please refer to the included "Warranty Card" for detailed terms and conditions.

For further assistance, technical support, or warranty claims, please visit the official Edifier website or contact their customer service.

Official Website: www.edifier.com
Included Components: Warranty Card

	ES20 User Manual - Version 1.0.0 Official user manual for the ES20 device, version 1.0.0. Provides detailed instructions, specifications, and operational guidance for optimal use.
	Edifier M60 Multimedia Speaker User Manual Get detailed instructions on setting up and using your Edifier M60 multimedia speakers. Learn about Bluetooth and USB connectivity, app features, playback controls, troubleshooting, and specifications.
	Edifier ES20 Portable Bluetooth Speaker Quick Start Guide Quick start guide for the Edifier ES20 Portable Bluetooth Speaker, covering setup, Bluetooth connection, stereo pairing, app usage, and troubleshooting.
	Edifier W820NB Headphones: User Manual and Features Comprehensive guide to the Edifier W820NB headphones, covering setup, Bluetooth connectivity, music playback, troubleshooting, and maintenance. Learn about active noise cancelling and Hi-Res audio.
	Edifier MP230 Portable Bluetooth Speaker User Manual User manual for the Edifier MP230 portable Bluetooth speaker, detailing safety instructions, functional operation, specifications, connectivity options, and troubleshooting for optimal audio experience.
	Edifier R980T Multimedia Speaker User Manual - Setup, Specifications, and Troubleshooting Comprehensive user manual for the Edifier R980T Multimedia Speakers. This guide provides detailed setup instructions, important safety information, technical specifications, and troubleshooting tips for optimal audio performance.

Edifier ES20