1. Introduction
Thank you for purchasing the DANFI AUDIO DF TE-2017 Vinyl Record Player. This manual provides essential information for the safe and correct operation of your new record player. Please read it thoroughly before use and retain it for future reference.
2. Package Contents
- DANFI AUDIO DF TE-2017 Vinyl Record Player
- 45 RPM Adapter
- Power Cord & Adapter (100-240V~)
- Replacement Needle
- Turntable Slipmat
- User's Manual (this document)
3. Product Overview
The DANFI AUDIO DF TE-2017 is a versatile 3-speed belt-drive turntable with built-in speakers, Bluetooth wireless playback, USB/SD recording, AUX input, and RCA output. It features a clear dust cover and a digital display for easy operation.
Figure 1: Front and Rear View of the TE-2017 Record Player with Labeled Components. This image displays the turntable platter, spindle, 45 RPM adapter, tone arm lift lever, speed selection switch, auto stop on/off switch, tone arm lock, stylus, speakers, AUX input, Mode/TF/USB controls, LED display, RCA audio out, and power port.
4. Setup
- Unpacking: Carefully remove the record player and all accessories from the packaging. Retain the packaging for future transport or storage.
- Dust Cover Installation: Slide the clear plastic dust cover into the brackets located at the rear of the turntable. Ensure it is securely seated.
- Power Connection: Connect the power adapter to the DC 5V/1A port on the rear of the record player and plug it into a wall outlet.
- Placement: Place the record player on a stable, level surface away from direct sunlight, heat sources, and excessive dust or vibrations.
- Stylus Protection: Remove the stylus protective cap before playing a record.
5. Operating Instructions
5.1 Playing Vinyl Records
- Power On: Turn the ON/OFF/VOLUME knob clockwise to power on the unit and adjust the volume.
- Select Mode: Set the PH/BT/AUX/USB switch to 'PH' (Phono) mode.
- Place Record: Place a vinyl record on the turntable platter. If playing a 7-inch single, use the included 45 RPM adapter.
- Select Speed: Adjust the 3-speed selection switch (33, 45, 78 RPM) to match the record's speed.
- Auto-Stop (Optional): If desired, set the Auto Stop ON/OFF switch to 'ON'. The turntable will stop spinning automatically when the record finishes.
- Position Tone Arm: Gently lift the tone arm using the lift lever. Move the tone arm over the desired track of the record.
- Lower Tone Arm: Slowly lower the tone arm onto the record using the lift lever. The music will begin to play.
- Adjust Pitch: Use the PITCH control knob to fine-tune the playback speed if necessary.
- End Playback: At the end of the record, lift the tone arm, return it to its rest, and lower the lift lever. Turn the ON/OFF/VOLUME knob counter-clockwise to power off.
Video 1: Demonstration of Vinyl Playback Mode on an LP&No.1 Turntable with Built-in Speakers. This video illustrates how to place a record, position the tone arm, and initiate playback, highlighting the smooth operation of the turntable.
5.2 Bluetooth Wireless Playback
- Power On: Turn the ON/OFF/VOLUME knob clockwise to power on the unit.
- Select Mode: Set the PH/BT/AUX/USB switch to 'BT' (Bluetooth) mode. The digital display will show 'BT' and the indicator light will blink blue, indicating pairing mode.
- Pair Device: On your smartphone, tablet, or other Bluetooth-enabled device, search for 'Turntable' in the Bluetooth settings and select it to pair. Once connected, the indicator light will stop blinking and remain solid blue.
- Play Music: Start playing music on your paired device. The audio will stream through the record player's built-in speakers.
- Adjust Volume: Control the volume using the ON/OFF/VOLUME knob on the record player or your paired device.
Video 2: Overview of Record Player with Speakers, demonstrating Bluetooth connectivity. This video shows how to switch to Bluetooth mode, pair a mobile device, and stream audio wirelessly to the turntable's speakers.
5.3 USB/SD Recording and Playback
- Insert USB/SD: Insert a USB flash drive or SD card into the corresponding port on the front panel.
- Select Mode: Set the PH/BT/AUX/USB switch to 'USB' mode. The digital display will show 'USB'.
- Playback: The unit will automatically detect and play audio files from the USB/SD device. Use the control buttons (Previous Song, Pause & Play, Next Song) to navigate tracks.
- Recording Vinyl to USB/SD:
- Start playing a vinyl record as described in section 5.1.
- Press the 'REC' button (if available, typically near the USB/SD slot) to begin recording. The indicator light may change to confirm recording is active.
- Press 'REC' again to stop recording. The recorded audio will be saved as an MP3 file on the USB/SD device.
- Use the 'SPLIT' button (if available) to create separate tracks during recording.
Video 3: USB Playback & Vinyl to MP3 Recording demonstration. This video shows how to insert a USB drive, initiate recording from vinyl, and manage recorded files, highlighting the digital conversion feature.
5.4 AUX Input
- Power On: Turn the ON/OFF/VOLUME knob clockwise to power on the unit.
- Select Mode: Set the PH/BT/AUX/USB switch to 'AUX' mode.
- Connect Device: Connect an external audio device (e.g., MP3 player, CD player) to the AUX IN port on the rear of the record player using a 3.5mm audio cable (not included).
- Play Audio: Play audio from your external device. The sound will be output through the record player's speakers.
- Adjust Volume: Control the volume using the ON/OFF/VOLUME knob on the record player or the external device.
5.5 RCA Output
- Connect External Speakers: Connect external powered speakers or an amplifier to the RCA OUT ports (red for right, white for left) on the rear of the record player using an RCA cable (not included).
- Play Audio: Play a vinyl record or stream via Bluetooth/AUX. The audio will be routed through the connected external audio system.
- Adjust Volume: Control the volume primarily through your external audio system. The record player's volume knob may still affect the output level.
Figure 2: Rear view of the TE-2017 Record Player, illustrating the RCA output ports connected to external speakers for enhanced audio quality.
5.6 Headphone Jack
For private listening, plug 3.5mm headphones into the headphone jack located on the front panel. The built-in speakers will be muted automatically.
6. Maintenance
- Cleaning the Stylus: Use a soft brush (not included) to gently clean the stylus from back to front. Do not use excessive force.
- Cleaning the Record Player: Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Dust Cover: Keep the dust cover closed when not in use to protect the turntable from dust and debris.
- Record Care: Handle records by their edges. Store them vertically in their sleeves to prevent warping and dust accumulation.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power adapter not connected or faulty outlet. | Ensure power adapter is securely connected and the outlet is functional. |
| No sound from speakers | Volume too low; incorrect mode selected; headphones connected. | Increase volume; select correct mode (PH, BT, AUX, USB); disconnect headphones. |
| Turntable not spinning | Power off; belt dislodged; auto-stop engaged prematurely. | Ensure power is on; check belt (refer to maintenance); try disabling auto-stop. |
| Skipping or distorted sound | Dirty or damaged record; dirty or worn stylus; turntable not level. | Clean record; clean or replace stylus; ensure turntable is on a level surface. |
| Bluetooth not pairing | Incorrect mode; device too far; device already paired. | Ensure 'BT' mode is selected; move device closer; unpair from other devices. |
8. Specifications
- Brand: DANFI AUDIO DF
- Model: TE-2017
- Turntable Speeds: 33 1/3, 45, 78 RPM
- Drive Type: Belt Drive
- Connectivity: Bluetooth Receiver, USB, SD Card, AUX Input, RCA Output
- Special Features: Digital Recorder, WAV Converter, Digital Display, Pitch Control, Auto-Stop
- Power Source: Corded Electric (DC 5V/1A)
- Signal-to-noise ratio (dB): 78 dB
- Product Dimensions: 35.56 x 27.94 x 12.45 cm (14 x 11 x 4.9 inches)
- Weight: 3.07 kg (6.77 lbs)
9. Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official DANFI AUDIO DF website. Keep your proof of purchase for any warranty claims.
