1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your LUTEC Outdoor Wall Light Fixture, Model B0DTHCF5KD. Please read this manual thoroughly before installation and retain it for future reference.
Image 1: The LUTEC Outdoor Wall Light Fixture, featuring a matte black finish and clear glass panels, shown illuminated.
2. Safety Information
WARNING: Risk of electric shock. Turn off power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are not familiar with electrical wiring. All wiring connections must be in accordance with local codes, ordinances, or the National Electrical Code (NEC).
- Ensure the fixture is properly grounded.
- Do not exceed the maximum wattage specified for the bulb.
- Handle glass components with care to prevent breakage.
- Keep packaging materials away from children.
3. Package Contents
Verify that all components are present and undamaged before beginning installation.
- LUTEC Outdoor Wall Light Fixture (1 unit)
- Mounting Bracket
- Screws (2)
- Wire Nuts (3)
- Owner's Manual
Image 2: Diagram showing the product dimensions and the included mounting accessories: two screws and three wire nuts.
4. Setup and Installation
Before installation, ensure the power is turned off at the circuit breaker. This fixture is designed for hardwired outdoor use.
4.1 Tools Required (Not Included)
- Phillips head screwdriver
- Wire strippers
- Electrical tape
- Safety glasses
4.2 Installation Steps
- Turn off Power: Locate the circuit breaker controlling the light fixture's power supply and turn it off. Verify power is off using a voltage tester.
- Remove Old Fixture: Carefully detach and remove the existing light fixture from the wall. Disconnect any existing wiring.
- Install Mounting Bracket: Secure the provided mounting bracket to the electrical junction box on the wall using the included screws. Ensure it is firmly attached and level.
- Wire Connections:
- Connect the green ground wire from the fixture to the bare copper or green ground wire from the electrical box using a wire nut.
- Connect the white neutral wire from the fixture to the white neutral wire from the electrical box using a wire nut.
- Connect the black hot wire from the fixture to the black hot wire from the electrical box using a wire nut.
- Ensure all connections are secure and covered with wire nuts. Wrap electrical tape around wire nuts for added security.
- Mount New Fixture: Carefully align the fixture with the mounting bracket and secure it to the wall using the provided screws. Ensure the fixture is flush against the wall.
- Install Bulb: Insert an E26 base bulb (max 25W LED, bulb not included) into the socket. The open bottom design allows for easy bulb replacement.
- Restore Power: Turn the power back on at the circuit breaker. Test the light fixture.
Image 3: Illustration of compatible E26 base bulbs (maximum 25W LED equivalent). Bulb is not included.
5. Operating Instructions
Once installed and powered, the LUTEC Outdoor Wall Light Fixture operates via your existing wall switch. Simply toggle the switch to turn the light on or off.
Image 4: The light fixture is controlled by a standard wall switch.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your light fixture.
- Cleaning: Turn off power before cleaning. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Bulb Replacement: Turn off power before replacing the bulb. Allow the bulb to cool completely. Unscrew the old bulb and screw in a new E26 base bulb (max 25W LED). The open bottom design facilitates easy access.
- Weather Resistance: The fixture is constructed from high-quality aluminum and features a clear glass shade, designed to be weather-resistant against rain, snow, sun, and wind.
Image 5: The fixture is IP65 waterproof, designed for durability in various weather conditions.
7. Troubleshooting
If your light fixture is not functioning correctly, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. | Check the circuit breaker and wall switch. Ensure power is on. |
| Loose wiring connections. | Turn off power at the circuit breaker. Check and tighten all wire connections. | |
| Faulty bulb. | Turn off power. Replace the bulb with a new E26 base bulb (max 25W LED). | |
| Light flickers. | Loose bulb or wiring. | Turn off power. Tighten the bulb. Check and tighten all wire connections. |
8. Specifications
- Brand: LUTEC
- Model: B0DTHCF5KD
- Color: Black
- Material: Aluminum
- Style: Modern
- Room Type: Entryway, Doorway, Porch, Hallway
- Product Dimensions: 4.72"L x 4.72"W x 7.87"H
- Specific Uses For Product: Garden (Outdoor Lighting)
- Indoor/Outdoor Usage: Outdoor
- Power Source: Hardwired
- Number of Items: 1
- Item Weight: 2.03 pounds
- Batteries Included?: No
- Batteries Required?: No
- Bulb Base: E26 (Bulb not included)
- Max Wattage: 25W LED
9. Warranty and Support
LUTEC provides high-quality service for its products.
- Return Policy: This product is eligible for a refund/replacement within 2026 days of purchase.
- Customer Service: For any issues or inquiries, please contact LUTEC customer service.
