Introduction
Thank you for choosing the BOVZA Twin Size L-Shaped Velvet Upholstered Corner Daybed with 2 Drawers and Built-in Side Storage Cabinet. This manual provides detailed instructions for the safe assembly, operation, and maintenance of your new daybed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Safety Information
- Read all instructions: Ensure you understand all steps before assembly.
- Two-person assembly: Assembly is recommended with two adults to prevent injury and ensure proper alignment.
- Keep children and pets away: During assembly, keep small parts out of reach of children and pets to avoid choking hazards.
- Use on a level surface: Assemble the daybed on a soft, clean, and level surface (e.g., carpet or rug) to prevent scratching the product or floor.
- Check all connections: Periodically check and tighten all bolts and screws to ensure stability.
- Weight capacity: Do not exceed the maximum weight capacity of 330 lbs (150 kg).
- Mattress thickness: Use a mattress with a recommended thickness of 6 inches for optimal fit and safety.
- Avoid standing or jumping: Do not stand or jump on the daybed.
- Proper use of drawers: Do not overload drawers. Ensure they are closed properly to prevent tripping hazards.
Package Contents
Your BOVZA daybed is shipped in 2 packages, which may arrive separately. Please verify all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
Components List:
- Upholstered Headboard/Backrest Panels
- Bed Frame Side Rails
- Wooden Slats (10 pieces)
- Side Storage Cabinet Components
- Drawer Components (2 sets)
- Support Legs
- Hardware Kit (screws, bolts, Allen wrench, etc.)
Setup and Assembly Instructions
Before assembly, ensure you have enough space and all parts are accounted for. Refer to the included assembly diagram for specific part identification and step-by-step instructions. A Phillips head screwdriver (not included) may be required in addition to the provided Allen wrench.
Step 1: Unpack and Identify Parts
Carefully unpack all components from both packages. Lay them out on a soft, clean surface. Identify each part using the provided assembly diagram and hardware list.
Figure 1: Overall dimensions of the daybed, including the L-shaped backrest, side storage, and pull-out drawers. Dimensions are provided in inches.
Step 2: Assemble the Main Bed Frame
Attach the upholstered headboard and backrest panels to the side rails using the provided bolts and Allen wrench. Ensure all connections are secure but do not overtighten until the frame is fully assembled.
Figure 2: Detail of the wooden slat support system within the bed frame, showing how slats are secured.
Step 3: Install Wooden Slats
Place the wooden slats across the bed frame supports. Secure them using the designated screws or fasteners. Ensure even spacing for proper mattress support.
Step 4: Assemble the Side Storage Cabinet
Assemble the components of the side storage cabinet according to the diagram. Attach it to the main bed frame as indicated in the instructions. Ensure it is firmly connected and stable.
Figure 3: Detailed view of the built-in side storage cabinet, featuring open shelves for easy access to items.
Step 5: Assemble and Insert Drawers
Assemble the two drawers, attaching the wheels or glides as specified. Once assembled, slide them into the designated spaces beneath the bed frame. Test their smooth operation.
Figure 4: The side storage unit connected to the bed frame, with one of the two under-bed drawers partially extended, showing its capacity.
Figure 5: An alternative angle showing the side storage and a drawer, highlighting the seamless integration with the daybed design.
Step 6: Final Inspection
Once all components are assembled, re-check all bolts and screws to ensure they are securely tightened. Place your mattress on the slats. Your BOVZA daybed is now ready for use.
Operating Instructions
Using the Storage Drawers:
The two under-bed drawers are designed for easy access and storage. Gently pull the drawer fronts to open. To close, push them back until they are flush with the bed frame. Avoid forcing the drawers if they encounter resistance. Ensure items stored within do not obstruct the closing mechanism.
Figure 6: The daybed with both storage drawers fully extended, showcasing their capacity for bedding or other essentials.
Using the Side Storage Cabinet:
The integrated side storage cabinet features open shelves for convenient access to books, decorative items, or personal belongings. Place items carefully on the shelves, ensuring they do not protrude excessively to prevent accidental knocking or damage.
Maintenance
Cleaning the Velvet Upholstery:
- Regular Dusting: Gently vacuum the velvet upholstery with a soft brush attachment to remove dust and loose debris.
- Spot Cleaning: For spills, blot immediately with a clean, dry cloth. Do not rub, as this can spread the stain and damage the velvet pile. For stubborn stains, use a mild, water-free solvent or dry-cleaning product specifically designed for velvet. Test on an inconspicuous area first.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, bleach, or harsh detergents, as these can damage the fabric.
Cleaning the MDF and Plywood Components:
- Wipe Down: Use a soft, damp cloth to wipe down the MDF and plywood surfaces. Dry immediately with a clean, dry cloth to prevent moisture damage.
- Avoid Excessive Moisture: Do not use excessive water or liquid cleaners directly on these surfaces.
General Maintenance:
- Check Fasteners: Periodically (every 3-6 months) check all bolts, screws, and connections. Tighten if necessary to maintain structural integrity.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading of the upholstery.
- Protect from Heat: Keep the daybed away from direct heat sources like radiators or fireplaces.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Daybed feels unstable or wobbly. | Loose bolts or screws. Uneven floor surface. | Check and tighten all assembly hardware. Ensure the daybed is placed on a level surface; use shims if necessary. |
| Drawers do not slide smoothly. | Obstruction in the drawer track. Misaligned drawer glides/wheels. Overloaded drawer. | Remove any obstructions. Check if drawer glides/wheels are properly installed and aligned. Reduce the weight in the drawer. |
| Squeaking noises from the bed frame. | Loose connections. Slats rubbing against the frame. | Tighten all bolts and screws. Ensure slats are properly seated and secured. |
| Missing parts or damaged components upon arrival. | Shipping damage or packaging error. | Do not proceed with assembly. Contact BOVZA customer support immediately with your purchase details. |
Specifications
- Brand: BOVZA
- Model: Twin Upholstered Corner Daybed Storage
- Size: Twin
- Material: Velvet, MDF, Plywood
- Color: Beige
- Overall Product Dimensions: 76.7" L x 40.5" W x 26.3" H
- Weight Capacity: 330 lbs
- Recommended Mattress Thickness: 6 inches
- Number of Slats: 10
- Number of Drawers: 2
- Integrated Storage: Side Storage Cabinet
- Assembly Required: Yes
- Shipping: 2 Packages (may arrive separately)
- Country of Origin: Vietnam
Warranty and Support
BOVZA products are manufactured with quality and care. For specific warranty information, please refer to the documentation included with your purchase or contact BOVZA customer support directly. If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please reach out to our customer service team. Please have your purchase receipt and model information ready when contacting support.
Customer Support: Refer to your purchase platform or BOVZA's official website for contact details.