Introduction
Thank you for choosing the iGear X-Bass 160 Ultimate Portable Bluetooth Party Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.
The iGear X-Bass 160 Ultimate Portable Bluetooth Party Speaker, featuring dual speakers, RGB lighting, and two wireless microphones.
What's in the Box
Carefully unpack your iGear X-Bass 160 speaker and ensure all items are present and in good condition. The package should contain:
- X-Bass 160 Speaker
- 2 Wireless Microphones
- 1 Charging Cable
- 1 Audio Cable
- User Manual (this document)
Product Features
The iGear X-Bass 160 is designed to deliver a powerful and immersive audio experience with a range of versatile features:
- Powerful 160W Dynamic Sound: Experience high-quality audio with crisp vocals and deep bass.
- Dual Bass Radiators: Enhance low-frequency sound for a richer bass experience.
- 2 Karaoke Mics Included: Two rechargeable wireless microphones for vocal performances.
- Vibrant RGB Light Modes: Mesmerizing lights that sync with your music.
- True Wireless Stereo (TWS) Pairing: Wirelessly connect two X-Bass 160 speakers for a stereo soundstage.
- Multiple Connectivity Options: USB, TF/SD Card, AUX Input, and Bluetooth for versatile playback.
- Convenient Remote Control: Full control over playback, volume, and light modes.
- Portable Design: Built-in trolley wheels for easy mobility.
- Splashproof (IPX4): Designed to withstand splashes, suitable for outdoor use.
The speaker comes with two rechargeable microphones, perfect for karaoke and vocal performances.
Utilize True Wireless Stereo (TWS) to pair two X-Bass 160 speakers for an expanded sound experience.
Mesmerizing RGB light modes create a dynamic visual experience that syncs with your music.
The speaker supports multiple input modes including AUX, USB, TF/SD Card, and Bluetooth for versatile audio playback.
With IPX4 splashproof rating, the X-Bass 160 is suitable for outdoor use and can withstand splashes.
The speaker features built-in trolley wheels for easy transportation, making it ideal for parties on the go.
Setup
- Initial Charging: Before first use, fully charge the speaker using the provided charging cable. Connect the cable to the speaker's charging port and a suitable power source. The charging indicator will show the charging status.
- Powering On/Off: Locate the power button on the speaker's control panel. Press and hold the button for a few seconds to turn the speaker ON or OFF.
- Bluetooth Pairing:
- Turn on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing Bluetooth light.
- Enable Bluetooth on your smartphone or audio device.
- Search for "iGear X-Bass 160" in the list of available devices and select it to pair.
- Once connected, you will hear an audible confirmation, and the Bluetooth light will become solid.
- Microphone Connection: The wireless microphones are pre-paired with the speaker. Simply insert batteries (if not already installed) and turn them on. They should automatically connect to the speaker.
- TWS (True Wireless Stereo) Pairing:
- Ensure both X-Bass 160 speakers are turned on and not connected to any Bluetooth device.
- On one speaker (this will be the primary speaker), press the TWS button. It will search for another X-Bass 160 speaker.
- Once connected, both speakers will play audio in stereo.
- Using AUX/USB/TF Card: Insert the respective cable or card into the designated port on the speaker. The speaker will automatically switch to the corresponding input mode or you may need to select it using the Mode button on the control panel or remote.
Operating Instructions
- Volume Control: Use the master volume knob on the speaker or the volume buttons on the remote control to adjust the overall sound level.
- Microphone Volume & Echo: Dedicated knobs on the speaker allow you to adjust the volume of the microphones independently and add echo effects for karaoke.
- Light Modes: Press the Light button on the speaker or remote to cycle through different RGB light modes or turn them off.
- Playback Control: Use the Play/Pause, Next, and Previous buttons on the speaker or remote to control music playback.
- Mode Selection: Press the Mode button to switch between Bluetooth, AUX, USB, and TF/SD card inputs.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker's exterior. Do not use abrasive cleaners, waxes, or solvents.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the speaker frequently. Charge it regularly, even if not in use for extended periods.
- Water Exposure: While splashproof, do not submerge the speaker in water or expose it to heavy rain. Ensure all ports are securely covered when near water.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Low battery; Power button not pressed correctly. | Charge the speaker fully; Press and hold the power button for 3-5 seconds. |
| No sound from speaker. | Volume too low; Incorrect input mode; Device not connected. | Increase volume; Select correct input mode (Bluetooth, AUX, USB, TF); Ensure device is paired/connected. |
| Bluetooth connection unstable or fails. | Speaker too far from device; Interference; Device Bluetooth issue. | Move device closer to speaker; Avoid obstacles; Restart speaker and device Bluetooth. |
| Microphones not working. | Microphone batteries low/dead; Microphone not turned on; Microphone volume too low. | Replace/charge microphone batteries; Turn on microphones; Increase microphone volume. |
| TWS pairing fails. | Speakers already connected to another device; TWS button not pressed correctly. | Disconnect both speakers from any Bluetooth device; Ensure only one speaker initiates TWS pairing. |
Specifications
| Feature | Detail |
|---|---|
| Model | X-Bass 160 |
| Wattage | 160 Watts |
| Connectivity Technology | Bluetooth |
| Power Source | Battery Powered |
| Audio Input | USB, TF/SD Card, AUX |
| Special Features | Bass Boost, Hi Res Audio, Portable, Stereo Pairing, USB Port |
| Product Dimensions | 36 x 35 x 85.9 cm |
| Item Weight | 13.5 Kilograms |
| Mounting Type | Floor Standing |
| Speaker Amplification Type | Active |
| Country of Origin | China |
Warranty and Support
For warranty information and customer support, please refer to the warranty card included with your product packaging or visit the official iGear website. Keep your purchase receipt as proof of purchase for any warranty claims.
Manufacturer: iGear Tech Private Limited, Goregaon East, Mumbai 400063
For further assistance, you may contact iGear customer service through their official channels.
