1. Introduction
This manual provides detailed instructions for the safe and efficient use of the Elation KL PAR FC IP, a 280W RGBMA IP65 rated LED PAR fixture. This fixture is designed for professional lighting applications, offering high output, precise color temperature control, full-spectrum color rendering, and even wash coverage. It is suitable for outdoor events and productions requiring robust performance and weather protection.
2. Safety Instructions
Always follow these basic safety precautions to reduce the risk of fire, electric shock, and personal injury.
- Ensure the fixture is properly grounded to prevent electric shock.
- Do not operate the fixture if the power cord is damaged.
- Disconnect power before performing any maintenance or cleaning.
- Avoid direct eye exposure to the light source when the fixture is operating.
- Ensure adequate ventilation around the fixture to prevent overheating.
- Mount the fixture securely using appropriate hardware and safety cables.
- This fixture is IP65 rated for outdoor use; however, ensure all connections are properly sealed.
3. Package Contents
Verify that all items listed below are included in your package:
- Elation KL PAR FC IP LED PAR Fixture
- 7.5" Gel Frame
- 4 Lenses (10°, 22°, 30°, 55°)
- IP65 Locking Power Cable
4. Product Overview
The Elation KL PAR FC IP features a highly efficient 5-in-1 (RGBMA) LED engine, delivering up to 11,263 field lumens. It is equipped with ColourTune Technology for outstanding color rendering (CRI of 94.9, TLCI of 95) and fully variable 16-bit CCT control. The fixture's robust design and IP65 rating make it suitable for various environments.
Key Features:
- 360W RGBMA LED Engine
- ColourTune Technology Software Integration
- 11,263 Total Fixture Lumen Output (Sphere)
- Field Replaceable Lenses (10°, 22°, 30°, 55° included)
- Stand-Alone Control with Touch Encoder and OLED Display
- Smooth 16-bit Selectable Dimming Modes and Curves
- Remote LED Refresh Rate and Fan Speed Adjustment
- Flicker Free Operation for TV and FILM
- RDM (Remote Device Management) Support
- IP65 Rated for outdoor use
Figure 1: Elation KL PAR FC IP LED PAR fixture, showcasing its robust black casing, integrated stand, and the red light emitted from its front lens.
5. Setup
- Mounting: The fixture can be suspended using any standard clamp or floor mounted using the integrated stand. Ensure the mounting surface or structure can safely support the weight of the fixture. Use a safety cable as an additional precaution.
- Lens Installation: Select the desired lens (10°, 22°, 30°, or 55°) and securely install it into the fixture. The lenses are field-replaceable.
- Power Connection: Connect the IP65 locking power cable to the fixture's power input. The fixture is self-contained and does not require an external power supply. Multiple units can be linked using the locking power pass-through.
- DMX Connection (Optional): For DMX control, connect a DMX cable from your DMX controller to the fixture's DMX input. If linking multiple fixtures, connect them in a daisy chain.
6. Operation
The KL PAR FC IP can be operated via industry-standard DMX protocols or in standalone mode using the integrated touch bar encoder and OLED display.
6.1 Standalone Operation:
The touch bar encoder and display, conveniently located at the backside of the fixture, provide direct control over various settings.
- Intensity: Adjust the overall brightness of the light output.
- Color Temperature (CCT): Fine-tune the white light color temperature.
- Green Shift: Adjust the green-magenta balance for precise color matching.
- ColourTune Technology: Access advanced color control features for a wide array of saturated and pastel colors.
- Other Settings: Navigate the menu to adjust LED refresh frequency, dimming curves, and fan speed.
6.2 DMX Operation:
Connect the fixture to a DMX controller. Refer to the detailed DMX channel chart in the full product manual (available on the manufacturer's website) for specific DMX addressing and control parameters. The fixture supports RDM (Remote Device Management).
7. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your fixture.
- Cleaning: Periodically clean the lenses and exterior casing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
- Inspection: Regularly inspect power cables, DMX cables, and mounting hardware for any signs of wear or damage. Replace damaged components immediately.
- Ventilation: Ensure that the cooling vents are free from dust and debris to maintain proper airflow.
8. Troubleshooting
If you encounter issues with your KL PAR FC IP, refer to the following common troubleshooting steps:
- No Power: Check the power cable connection, power source, and any circuit breakers.
- No Light Output: Verify power, check DMX signal (if applicable), and ensure intensity settings are not at zero.
- Incorrect Color/Function: Check DMX addressing and mode settings. For standalone operation, verify menu settings.
- Overheating: Ensure proper ventilation and that fan speeds are set appropriately.
- For more complex issues, consult the full product manual or contact customer support.
9. Specifications
| Attribute | Detail |
|---|---|
| Model Number | KLP528 |
| Brand | Elation Professional |
| Light Source Type | Light Emitting Diode (LED) |
| LED Engine | RGBMA (Red, Green, Blue, Mint, Amber) |
| Power Consumption | 360W (Engine) |
| Lumen Output | 11,263 Total Fixture Lumen (Sphere) |
| CRI | 94.9 |
| TLCI | 95 |
| IP Rating | IP65 |
| Material | Metal |
| Color | Black Casing |
| Product Dimensions | 12"L x 17.8"W x 8.5"H |
| Item Weight | 17 Pounds |
| Included Components | 7.5" Gel Frame, 4 Lenses (10°, 22°, 30°, 55°), IP65 Locking Power Cable |
| Specification Met | CE |
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Elation Professional website or contact their authorized distributors. Keep your purchase receipt as proof of purchase.
