Dyu C6 Half Grip Throttle User Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Dyu C6 Half Grip Throttle. This throttle is specifically designed for the DYU C6 26 Inch City Electric Bike, featuring an integrated power switch and digital power indicators. Please read this manual thoroughly before use to ensure proper function and safety.

2. Safety Information

Always prioritize safety when installing or operating electrical components on your bicycle. Failure to follow these instructions could result in injury or damage to the product or bicycle.

• Ensure the electric bike's power is OFF and the battery is disconnected before beginning any installation or maintenance.
• If you are unsure about any step, seek assistance from a qualified bicycle technician.
• Do not modify the throttle or its wiring. Unauthorized modifications can void the warranty and create safety hazards.
• Keep all electrical connections dry and free from dirt or debris.
• Verify all connections are secure before restoring power to the bike.

3. Product Overview

The Dyu C6 Half Grip Throttle is an essential component for controlling the speed of your electric bike. It features a comfortable half-grip design, an integrated power switch, and a digital display for battery level indication.

Key Features:

• Half Grip Throttle design for ergonomic control.
• Integrated Power Switch button for convenient on/off control.
• 4-digital power indicators to monitor battery charge level.
• Long cable (approximately 150cm / 59 inches) for flexible routing.
• 6-wire (black, blue, red, white, yellow, brown) and 6-pin male white plug for secure connection.
• Durable ABS Plastic and Rubber construction for comfort and longevity.

Component Identification:

This image displays the complete throttle unit, highlighting the ergonomic grip, the power button located at the thumb position, and the multi-colored wires leading to the white connector. The digital power indicators are visible above the power button.

This view shows the underside of the throttle body, where the model and voltage information ("KH-DX 36V") is typically located. This label confirms the throttle's compatibility with 36V systems.

4. Setup and Installation

Follow these steps carefully to install the Dyu C6 Half Grip Throttle on your DYU C6 26 Inch City Electric Bike. Ensure the bike's power is off and the battery is disconnected before proceeding.

1. Prepare the Handlebar: If replacing an existing throttle, carefully remove the old unit. Clean the handlebar area where the new throttle will be mounted.
2. Position the Throttle: Slide the Dyu C6 Half Grip Throttle onto the right side of your handlebar. Ensure it is positioned comfortably for your hand and that the power button and digital indicators are easily accessible.
3. Secure the Throttle: The throttle is designed for easy installation with only one fixing screw. Tighten this screw securely to prevent the throttle from rotating during use. Do not overtighten.
4. Connect the Wiring: Locate the corresponding 6-pin female connector on your DYU C6 electric bike's wiring harness. Carefully align the 6-pin male white plug from the throttle with the female connector and push them firmly together until they click into place. The wires are color-coded (black, blue, red, white, yellow, brown) for proper connection.
5. Route the Cable: Neatly route the 150cm (59 inch) cable along the bike frame, securing it with zip ties or cable clips as needed, ensuring it does not interfere with steering or other moving parts.
6. Final Check: Double-check all connections and ensure the throttle is firmly mounted and the cable is routed safely.

This image demonstrates the throttle mounted on a bicycle handlebar, providing a visual reference for proper positioning and integration with the bike's existing components.

5. Operating Instructions

Once installed, operating the Dyu C6 Half Grip Throttle is straightforward.

1. Power On: Reconnect the electric bike's battery and turn on the main power switch of the bike (if separate). Then, press the power switch button located on the throttle itself to activate the throttle and display.
2. Check Battery Indicator: Observe the 4 digital power indicators on the throttle. These lights will show the current battery charge level of your electric bike.
3. Engage Throttle: To accelerate, gently twist the throttle grip towards you (or away from you, depending on bike configuration). The more you twist, the more power will be delivered to the motor.
4. Release Throttle: To decelerate or stop, release the throttle grip back to its original position.
5. Power Off: When finished riding, press the power switch button on the throttle again to turn it off. It is also recommended to turn off the main power switch of the bike and disconnect the battery for long-term storage.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your Dyu C6 Half Grip Throttle.

• Cleaning: Wipe the throttle clean with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic and rubber components.
• Inspection: Periodically inspect the throttle for any signs of wear, damage, or loose connections. Check the cable for fraying or kinks.
• Connections: Ensure the 6-pin connector remains securely attached and free from corrosion.
• Storage: If storing the bike for an extended period, ensure the throttle is clean and dry. Store in a cool, dry place away from direct sunlight.

7. Troubleshooting

If you encounter issues with your Dyu C6 Half Grip Throttle, refer to the table below for common problems and solutions.

8. Specifications

9. Warranty and Support

This product is manufactured by Dyu. For warranty information and technical support, please refer to the warranty policy provided with your DYU C6 Electric Bike or contact the manufacturer directly.

Manufacturer: Dyu

For further assistance, please visit the official Dyu website or contact their customer service department. Keep your purchase receipt as proof of purchase for any warranty claims.