Orient Electric Uno BLDC
Contents
Orient Electric 1200 mm Uno BLDC Ceiling Fan User Manual
Model: Uno BLDC (1200 mm)
1. Introduction
Thank you for choosing the Orient Electric Uno BLDC Ceiling Fan. This fan is designed for energy efficiency and comfort, featuring a Brushless Direct Current (BLDC) motor and remote control operation. Please read this manual carefully before installation and use to ensure proper function and safety.
Image: The Orient Electric Uno BLDC Ceiling Fan in Glacier Grey, showcasing its modern design.
Image: Illustration highlighting the fan's TechXDesign, including Boost Mode for maximum air delivery and low power consumption.
2. Safety Instructions
To reduce the risk of fire, electric shock, or injury, observe the following safety precautions:
- Ensure the main power supply is disconnected before installation, cleaning, or maintenance.
- Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
- The fan must be mounted to a structure capable of supporting its weight.
- Ensure all electrical connections are secure and properly insulated.
- Do not insert objects into the fan blades while the fan is operating.
- Keep children and pets away from the fan during operation.
- Do not use the fan in damp or wet locations.
3. Package Contents
Verify that all components are present in the package:
- Motor
- Down Rod
- Shackle Kit, A pair of canopies
- A set of 3 Blades
- Remote, Batteries
4. Setup and Installation
Professional installation by a certified electrician is highly recommended to ensure safety and proper functioning. The general steps for installation include:
- Mounting Bracket Installation: Securely attach the mounting bracket to the ceiling joist or a suitable support structure.
- Down Rod Assembly: Assemble the down rod with the motor unit.
- Wiring: Connect the electrical wires from the ceiling to the fan motor, ensuring correct polarity and secure connections.
- Canopy Installation: Slide the canopies up to cover the wiring and mounting bracket.
- Blade Attachment: Securely attach the three blades to the motor housing.
- Power On: Restore power and test the fan operation with the remote control.
Image: The Uno BLDC Ceiling Fan seamlessly installed in a room, demonstrating its aesthetic integration.
5. Operating Instructions
The Orient Electric Uno BLDC Ceiling Fan is operated using the included remote control. Ensure batteries are correctly inserted into the remote.
Image: The remote control for the Uno BLDC fan, showing buttons for power, speed settings (1-5), timer options, and Boost mode.
- Power On/Off: Press the ON or OFF button to turn the fan on or off.
- Speed Control: Use the speed buttons (1-5) to select the desired fan speed.
- Boost Mode: Press the BOOST button for maximum air delivery. The fan will operate at its highest speed.
- Timer Function: Set the fan to turn off automatically after 2, 4, or 6 hours using the TIMER button.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your fan.
- Cleaning: Dust the fan blades and motor housing regularly with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and then dry thoroughly.
- Do Not Use: Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Blade Inspection: Periodically check that the blades are securely fastened.
- Power Disconnection: Always disconnect power to the fan before cleaning or performing any maintenance.
7. Troubleshooting
Refer to the table below for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start. | No power supply; Loose wiring; Remote control batteries depleted. | Check circuit breaker/fuse; Ensure all connections are secure; Replace remote batteries. |
| Fan makes excessive noise. | Loose blades; Loose mounting hardware; Motor issue. | Tighten blade screws; Check and tighten mounting screws; Contact customer support if motor noise persists. |
| Remote control not responding. | Depleted batteries; Obstruction between remote and fan receiver. | Replace batteries; Ensure clear line of sight to the fan. |
| Low airflow. | Incorrect speed setting; Dust accumulation on blades. | Increase fan speed; Clean fan blades. |
If the problem persists after attempting these solutions, please contact Orient Electric customer support.
8. Specifications
Image: An exploded view illustrating the internal components of a BLDC motor, highlighting its advanced design.
| Feature | Detail |
|---|---|
| Brand | Orient Electric |
| Model Name | Uno BLDC |
| Colour | Glacier Grey |
| Electric Fan Design | Ceiling Fan |
| Power Source | Corded Electric |
| Product Dimensions (D x W x H) | 18D x 18W x 19.5H Centimeters |
| Special Feature | BEE Star Rated, Remote Controlled |
| Mounting Type | Ceiling Mount |
| Controller Type | Remote Control |
| Number Of Speeds | 5 |
| Wattage | 28 Watts |
| Number of Blades | 3 |
| Air Flow Capacity | 220 Cubic Centimeters Per Minute |
| Speed | 350 RPM |
| Voltage | 240 Volts |
| Motor Type | Brushless |
| Material Type | Aluminium |
| Blade Length | 1200 Millimetres |
| Item Weight | 3200 Grams |
| BEE Rating | 5-star rated (Period: 17th January, 2024 to 31st December, 2025) |
9. Warranty and Support
Your Orient Electric Uno BLDC Ceiling Fan comes with a comprehensive warranty and dedicated support.
- Warranty: The product is backed by a 3-Year Warranty.
- Service Network: Orient Electric provides a Pan-India Service Network covering over 700+ cities and 17,000+ PIN codes.
- Assistance: For any assistance or service requests, please call our toll-free number. Refer to the product packaging or Orient Electric's official website for the current toll-free number.
Image: Visual representation of Orient Electric's extensive service network, indicating over 650 service centers and coverage across more than 17,000 pincodes.
Image: The Uno BLDC fan in a serene room setting, emphasizing the assurance of nationwide service support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.