1. Introduction
The SmallRig SR-RG2 Multifunctional Wireless Shooting Grip (Model 4551) is a versatile accessory designed for photographers and videographers. It functions as a camera grip, an adjustable selfie stick, and a stable desktop tripod, making it suitable for various shooting scenarios including vlogging, live streaming, and general photography. This manual provides detailed instructions for its setup, operation, and maintenance.
2. Package Contents
Please verify that all items listed below are included in your package:
- Shooting Grip x 1
- Wrist Strap x 1
- Operating Instruction x 1
- User Manual x 1
- Guarantee Card x 1
3. Product Overview
Familiarize yourself with the components of your SmallRig SR-RG2 grip.
Figure 3.1: Front view of the SmallRig SR-RG2 Wireless Shooting Grip, showcasing its compact design and control buttons.
Figure 3.2: Detailed diagram of the SmallRig SR-RG2 grip, labeling key components such as the 1/4"-20 screw, rotate button, tilt button, battery level indicator, BLE indicator, zoom buttons (T/W), REC button, focus/shutter button, power button, customizable 'C' button, and charging port.
- 1/4"-20 Screw: For attaching cameras and other accessories.
- Rotate Button: Adjusts the camera's rotation.
- Tilt Button: Adjusts the camera's tilt angle.
- Battery Level and Charging Indicator: Displays battery status.
- BLE Indicator: Bluetooth Low Energy connection status.
- TW: Zoom Button: Controls camera zoom (Telephoto/Wide).
- REC Button: Starts and stops video recording.
- Focus / Shutter Button: Half-press to focus, full-press to capture photo.
- Power Button: Turns the grip's remote control on/off.
- Customizable "C" Button: Assignable function button.
- Charging Port: USB-C port for charging the remote control.
4. Compatibility
The SmallRig SR-RG2 grip is compatible with select camera models from Nikon, Sony, and Canon. Please refer to the list below to confirm your camera's compatibility.
Figure 4.1: Compatibility chart for various camera brands and models.
Compatible Devices:
- For Nikon: Z50II
- For Sony: Alpha 7 III / Alpha 7 IV / Alpha 7R III / Alpha 7R IV / Alpha 7R V / Alpha 7S III / Alpha 7C II / Alpha 7C / Alpha 7CR / Alpha 9 / Alpha 9 II / Alpha 9 III / Alpha A1 / Alpha 1 II / Alpha 6700 / Alpha 6600 / Alpha 6100 / Alpha 6400 / ZV-E1 / ZV-E10 / ZV-E10 II / ZV-1 II / ZV-1 / ZV-1F / FX3
- For Canon: EOS M200 / R50 / PowerShot V1 / EOS R50V / EOS R5II / EOS R8 / EOS R6 Mark II / EOS R5 / EOS R6 / EOS R7 / EOS R10 / EOS M6 Mark II / EOS R / EOS M50 II / G7X III
Before purchasing, please check if your camera model is compatible. Compatibility may be expanded through firmware updates via the SmallRig Up App.
5. Setup
5.1 Mounting the Camera
- Ensure the grip is in a stable position, either held firmly or deployed as a tripod.
- Align the 1/4"-20 screw on the top of the grip with the tripod mount on your camera.
- Gently screw the camera onto the grip until secure. The grip includes rubber pads to prevent scratches to your camera.
- Verify the camera is securely attached before use.
5.2 Charging the Remote Control
The remote control features a USB-C charging port.
- Connect a USB-C cable to the charging port on the remote control.
- Connect the other end of the cable to a power source.
- A full charge takes approximately 2.5 hours and provides up to 40 hours of use.
Note: Remote control charging input voltage must not exceed 8V.
5.3 Pairing the Remote Control
The grip features modular magnetic wireless control. To pair the remote control with your camera:
- Turn on your camera's Bluetooth function.
- Turn on the remote control using the Power Button.
- Refer to your camera's manual for specific Bluetooth pairing instructions. For some Canon cameras, pressing the "C" button and the "REC" button simultaneously may initiate pairing mode.
- Select the SmallRig SR-RG2 from your camera's Bluetooth device list to complete pairing.
Figure 5.1: The remote control can be detached from the grip for wireless operation.
5.4 SmallRig Up App for Firmware Updates
For broader camera compatibility and improved functionality, it is recommended to regularly check for firmware updates via the SmallRig Up App.
Figure 5.2: Firmware update interface on the SmallRig Up App.
- Download the SmallRig Up App from your device's app store.
- Connect your grip to the app following the in-app instructions.
- Check for available firmware updates and follow the prompts to install them.
6. Operation
6.1 Using the Grip as a Handle
Hold the grip comfortably for stable handheld shooting. The ergonomic design provides a secure hold for your camera.
6.2 Extending as a Selfie Stick
The grip can be extended to 14.6cm (5.7in) for wider framing and different perspectives.
Figure 6.1: The grip extended for wider framing, functioning as a selfie stick.
- Gently pull the top section of the grip upwards to extend it.
- Adjust to your desired length.
- Ensure it is securely locked in place before use.
6.3 Deploying as a Tripod
The grip transforms into a stable desktop tripod for hands-free operation.
Figure 6.2: The grip deployed as a stable desktop tripod.
- Fold out the legs at the base of the grip.
- Place the tripod on a flat, stable surface.
- Ensure the camera is balanced to prevent tipping.
6.4 Remote Control Functions
The detachable remote control allows for wireless operation of your compatible camera within a range of up to 10m (32.8ft).
- Focus / Shutter Button: Half-press to activate autofocus, full-press to take a photo.
- REC Button: Press to start video recording, press again to stop.
- TW: Zoom Button: Use 'T' for telephoto zoom (zoom in) and 'W' for wide-angle zoom (zoom out).
- Customizable "C" Button: This button can be assigned to various functions through your camera's settings or the SmallRig Up App, depending on camera model.
6.5 Adjusting Shooting Angles
The grip offers flexible angle adjustments for diverse shooting needs.
Figure 6.3: Demonstrating 180° tilt and 360° pan adjustments.
- 360° Pan: Use the rotate button or manually adjust the camera's horizontal position.
- 180° Tilt: Use the tilt button or manually adjust the camera's vertical angle (90° forward and 90° backward).
7. Maintenance
- Cleaning: Wipe the grip with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the grip in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: For optimal battery life, avoid fully discharging the remote control frequently. Charge it regularly, even if not in use for extended periods.
- Load Capacity: Adhere to the specified load capacities: 1.5kg (3.3lb) when not extended and 0.8kg (1.76lb) when extended, to ensure stability and prevent damage.
8. Troubleshooting
- Remote Control Not Pairing:
- Ensure both the remote control and your camera's Bluetooth are turned on.
- Check camera compatibility (Section 4).
- Try restarting both the remote and the camera.
- Ensure the remote control is charged.
- For Canon cameras, try pressing the "C" and "REC" buttons simultaneously to enter pairing mode.
- Remote Control Range Issues:
- Ensure there are no obstructions between the remote and the camera.
- Reduce the distance between the remote and the camera.
- Check for potential interference from other wireless devices.
- Grip Stability Issues (Tripod Mode):
- Ensure the tripod legs are fully extended and placed on a flat, stable surface.
- Verify that your camera and lens combination does not exceed the specified load capacity (1.5kg unextended, 0.8kg extended).
- Ensure the camera is balanced on the grip.
- Charging Issues:
- Ensure the USB-C cable is properly connected to both the remote and the power source.
- Try a different USB-C cable or power adapter.
- Confirm the charging input voltage does not exceed 8V.
9. Specifications
Detailed technical specifications for the SmallRig SR-RG2 Multifunctional Wireless Shooting Grip.
Figure 9.1: Package parameters and detailed product specifications.
| Feature | Detail |
|---|---|
| Product Dimensions (Not Extended) | 174.8 x 46.0 x 39.4mm (6.9 x 1.8 x 1.55in) |
| Product Dimensions (Extended) | 321.0 x 46.0 x 39.4mm (12.6 x 1.8 x 1.55in) |
| Product Weight | 210.0 ± 5.0g (7.4 ± 0.2oz) |
| Package Weight | 265.0 ± 5.0g (9.3 ± 0.2oz) |
| Material(s) | Nylon + Glass Fiber, Aluminum Alloy, Stainless Steel |
| Wireless Communication | Bluetooth |
| Control Range | Up to 10m (32.8ft) |
| Battery Type | Nonstandard Battery (Rechargeable via USB-C) |
| Charging Time | Approx. 2.5 hours |
| Usage Time | Up to 40 hours |
| Load Capacity (Unextended) | 1.5kg (3.3lb) |
| Load Capacity (Extended) | 0.8kg (1.76lb) |
10. Warranty and Support
Your SmallRig SR-RG2 Multifunctional Wireless Shooting Grip comes with a Guarantee Card. Please refer to the terms and conditions outlined on this card for warranty details.
For technical support, troubleshooting assistance, or warranty claims, please contact SmallRig customer service through their official website or the contact information provided with your product documentation.
