Bburago 1:24 2023 Race Mercedes W14 Model Kit Assembly Instructions

Introduction

This instruction manual provides detailed guidance for assembling, displaying, and maintaining your Bburago 1:24 2023 Race Mercedes W14 Model Kit. This kit allows you to construct a detailed replica of George Russell's #63 Mercedes-AMG F1 W14 E Performance car. Designed for enthusiasts aged 14 and up, this model kit requires no glue or paint for assembly.

Safety Information

For external use only. This product contains small parts and is not suitable for children under 3 years due to choking hazards. Adult supervision is recommended for assembly by younger users.

Package Contents

Carefully unpack all components and verify that all parts are present before beginning assembly. The kit includes:

• 1x Mercedes-AMG F1 W14 E Performance Die-Cast Car Body (partially assembled)
• 4x Wheels (front and rear)
• 1x Driver Figure with Helmet (George Russell #63)

Image: The Bburago 1:24 Mercedes W14 Model Kit packaging, illustrating the main car body, individual wheels, and the driver figure with helmet, ready for assembly.

Assembly Instructions

This model kit is designed for easy snap-fit assembly without the need for glue or paint. Follow these steps:

1. Unpack Components: Carefully remove all parts from the packaging. Place them on a clean, flat surface to ensure no small pieces are lost.
2. Attach Wheels: Identify the four wheels. Each wheel is designed to snap onto its corresponding axle on the car body. Align the wheel with the axle and apply gentle, even pressure until it clicks securely into place. Repeat for all four wheels. Ensure they spin freely.
3. Place Driver Figure: Position the George Russell driver figure into the cockpit of the car. The figure is designed to fit snugly. Adjust as needed for proper seating.
4. Final Inspection: Once all parts are assembled, gently check all connections to ensure they are secure. Your Bburago Mercedes W14 model is now complete.

Image: The fully assembled Bburago 1:24 Mercedes W14 model, showcasing its detailed design and livery.

Display and Care

Your Bburago model is a collector's item and should be displayed with care. Place it on a stable, flat surface away from direct sunlight, extreme temperatures, and high humidity to prevent damage or discoloration. Avoid dropping the model, as this can cause parts to break or detach.

Maintenance

To keep your model looking its best, dust it regularly with a soft, dry cloth or a soft-bristled brush. Avoid using abrasive cleaners, solvents, or excessive water, as these can damage the paint finish or plastic components. For stubborn dust in crevices, a can of compressed air can be used carefully.

Troubleshooting

• Parts Not Fitting: Ensure you are attempting to connect the correct parts and that they are oriented correctly. Apply gentle, even pressure. Do not force parts, as this may cause breakage.
• Loose Parts: If a part becomes loose after assembly, gently press it back into place. If it repeatedly comes loose, a tiny drop of model-safe adhesive (not included) can be used, but this is generally not required for Bburago kits.
• Missing or Damaged Parts: If you discover any missing or damaged parts upon opening the kit, please contact Bburago customer support with your proof of purchase.

Specifications

Warranty and Support

For information regarding product warranty, returns, or technical support, please refer to the official Bburago website or contact their customer service department directly. Keep your proof of purchase for any warranty claims.