Kuvings EVO820GMS Whole Slow Juicer Instruction Manual

1. Introduction

Thank you for choosing the Kuvings EVO820GMS Whole Slow Juicer. This manual provides essential information for the safe and efficient operation, maintenance, and care of your new appliance. Please read all instructions carefully before first use and retain this manual for future reference.

The Kuvings EVO820GMS is a cold press juicer designed to extract maximum nutrients and flavor from fruits and vegetables. Its innovative features, including a wide feed chute and auto-cutting auger, simplify the juicing process, allowing you to create fresh juices, smoothies, and sorbets with ease.

Figure 1: Kuvings EVO820GMS Whole Slow Juicer with fresh produce and a glass of juice.

2. Important Safety Instructions

To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using electrical appliances.

• Read all instructions before operating the juicer.
• Do not immerse the motor base in water or other liquids.
• Unplug from outlet when not in use, before assembling or disassembling parts, and before cleaning.
• Keep hands and utensils out of the feed chute during operation to prevent injury. Use the food pusher provided.
• Ensure all parts are correctly assembled and locked before operating.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• The juicer is made from BPA-free materials for your safety and health.

3. Package Contents

Verify that all components are present and in good condition upon unpacking.

• Motor Base
• Juicing Bowl (Main Chamber) with pulp and juice outlets
• O-shaped Flip Gate (Mega Hopper)
• Pressing Screw (Auger)
• Fine Sieve (for clear juice)
• Coarse Sieve (for pulpy juice)
• Smoothie Strainer (for thick smoothies)
• Sorbet Strainer (for frozen desserts)
• Juice Container (600 ml capacity)
• Pulp Container
• Food Pusher
• Cleaning Brush (with foldable hard/brush end)
• Power Cord

Figure 2: All included parts of the Kuvings EVO820GMS Juicer.

4. Setup and Assembly

Before first use, wash all removable parts with warm soapy water, rinse thoroughly, and dry. Ensure the motor base is unplugged.

1. Assemble the Juicing Bowl: Select your desired sieve (fine, coarse, smoothie, or sorbet strainer) and insert it into the juicing bowl. Then, place the pressing screw (auger) into the center of the sieve.
2. Attach the Mega Hopper: Place the O-shaped flip gate (mega hopper) onto the juicing bowl assembly. Align the arrow markings on the hopper with the corresponding marks on the juicing bowl, then twist to lock it into place.
3. Mount on Motor Base: Carefully place the assembled juicing bowl and hopper onto the motor base. Align the arrow markings on the juicing bowl with the arrow on the motor base, then twist clockwise until it locks securely.
4. Position Containers: Place the juice container under the juice outlet and the pulp container under the pulp outlet.
5. Connect Power: Plug the power cord into a grounded electrical outlet.

Video 1: General assembly and operation overview for Kuvings juicers.

5. Operating Instructions

The Kuvings EVO820GMS is designed for efficient and quiet operation, preserving nutrients through its slow-press technology.

5.1 Preparing Ingredients

• Wash all fruits and vegetables thoroughly.
• Remove hard seeds (e.g., from mangoes, peaches) and thick peels (e.g., citrus fruits) before juicing.
• For apples, remove the stem to ensure greater durability of the auger.
• The wide 3.2-inch (82mm) O-shaped flip gate allows you to insert whole fruits and vegetables, minimizing prep time. The auto-cutting auger will slice and prep ingredients before pressing.

5.2 Juicing Process

1. Ensure the juicer is properly assembled and plugged in.
2. Turn the power switch to the 'ON' position.
3. Slowly feed prepared fruits and vegetables into the mega hopper. The auto-cutting auger will process them.
4. The slow juicing speed (50 RPM for the auger, 17 RPM for the rotating brush) reduces heat buildup and oxidation, resulting in a fresher, nutrient-rich juice.
5. If ingredients get stuck, press and hold the 'REV' (Reverse) button to dislodge them. Release the button and resume normal operation.
6. Once juicing is complete, turn the power switch to 'OFF'.

Figure 3: Pouring fresh green juice from the juicer.

5.3 Versatility (Juice, Smoothies, Sorbet, Nut Milk)

The Kuvings EVO820GMS comes with various strainers to expand its functionality:

• Fine Sieve: For clear, pulp-free juices.
• Coarse Sieve: For juices with more pulp.
• Smoothie Strainer: For thicker, creamier smoothies.
• Sorbet Strainer: For delicious frozen desserts from frozen fruits.

Figure 4: The juicer's 3-in-1 versatility for different preparations.

6. Maintenance and Cleaning

Regular cleaning ensures optimal performance and longevity of your juicer. Cleaning should be done immediately after each use.

1. Disassemble: Turn off and unplug the juicer. Disassemble all removable parts in reverse order of assembly.
2. Rinse: Rinse all disassembled parts under lukewarm running water.
3. Brush Cleaning: Use the provided cleaning brush to remove any pulp residue from the sieves and other components. The brush has a foldable end with both hard bristles and a softer brush for thorough cleaning.
4. Pulp Outlet: The pulp outlet has a cap that can be opened to easily remove any remaining pulp.
5. Drying: Allow all parts to air dry completely before reassembling or storing.

Important: Do not wash any parts in a dishwasher. Hand washing is recommended to maintain the integrity and longevity of the materials.

Figure 5: Easy and quick cleaning process with the specialized brush.

7. Troubleshooting

If you encounter any issues with your Kuvings EVO820GMS, please refer to the following common problems and solutions:

• Juicer does not turn on: Ensure the power cord is securely plugged into a working outlet. Check that all parts are correctly assembled and locked into place. The juicer has safety features that prevent operation if not properly assembled.
• Ingredients are stuck/Juicer stops during operation: Press and hold the 'REV' (Reverse) button for a few seconds to dislodge any stuck ingredients. Release the button and resume normal operation. If the issue persists, disassemble and clean the juicer, ensuring no large, hard pieces are blocking the auger.
• Excessive pulp in juice: Ensure the fine sieve is correctly installed for clearer juice. If using the coarse sieve, some pulp is normal.
• Low juice yield: Ensure ingredients are fresh and properly prepared (e.g., remove hard seeds). The slow-press technology is designed for high yield, but very dry or fibrous ingredients may yield less juice.
• Leakage: Check that all parts are correctly assembled and securely locked. Ensure the smart cap on the juice outlet is properly closed when not dispensing.

If problems persist after following these steps, please contact Kuvings customer service.

8. Specifications

9. Warranty and Support

Kuvings is committed to providing reliable products. The EVO820GMS Whole Slow Juicer includes a 15-year assurance, ensuring long-term performance and peace of mind.

For any questions, technical support, or warranty claims, please contact Kuvings customer service. Refer to your product registration card or the Kuvings website for detailed contact information.