Introduction
This manual provides comprehensive instructions for the safe and efficient use of your Relaxdays 390ml Stainless Steel Soap Dispenser. Please read these instructions carefully before initial use and retain them for future reference. This dispenser is designed for various liquid soaps, lotions, and shower gels.
Figure 1: Relaxdays Black Stainless Steel Soap Dispenser in a kitchen environment.
Setup
- Unpack: Carefully remove all components from the packaging. Ensure all parts are present: dispenser body and pump head.
- Initial Cleaning: Before first use, rinse the dispenser body and pump mechanism with warm water. Do not use abrasive cleaners.
- Placement: Position the dispenser on a flat, stable surface in your bathroom, kitchen, or guest toilet.
- Filling the Dispenser:
- Unscrew the pump head from the dispenser body by turning it counter-clockwise.
- Pour your desired liquid soap, lotion, or shower gel into the dispenser body. Do not overfill; leave a small air gap at the top. The maximum capacity is 390ml.
- Carefully screw the pump head back onto the dispenser body by turning it clockwise until secure.
Figure 2: Unscrewing the pump head for refilling the dispenser.
Operating Instructions
- First Use: For the first use, or after refilling, pump the dispenser several times until the liquid begins to dispense consistently. This primes the pump mechanism.
- Dispensing: Press down on the pump head to dispense the desired amount of liquid. Release the pump head to allow it to return to its original position.
- Refilling: When the liquid level is low, follow the "Filling the Dispenser" steps outlined in the Setup section.
Figure 3: Close-up of the dispenser's pump head for operation.
Maintenance
- Regular Cleaning: Wipe the exterior of the dispenser regularly with a soft, damp cloth to remove soap residue and water spots.
- Deep Cleaning: Periodically, disassemble the pump head and rinse all components thoroughly with warm water to prevent clogging, especially if switching between different types of liquids.
- Avoid Abrasives: Do not use abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the stainless steel finish.
- Drying: After cleaning, dry all parts completely before reassembling to prevent water spots and maintain hygiene.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump not dispensing liquid. |
|
|
| Liquid leaking from pump head. |
|
|
| Pump mechanism feels stiff. |
|
|
Specifications
- Model: 10049978_46
- Brand: Relaxdays
- Material: Stainless Steel (body), Plastic (internal pump mechanism)
- Color: Black
- Capacity: Approximately 390 ml (13.2 fl oz)
- Dimensions (H x W x D): Approximately 16 x 9 x 9 cm (6.3 x 3.54 x 3.54 inches)
- Weight: Approximately 180 g (6 ounces)
Figure 4: Product dimensions and capacity.
Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Relaxdays customer service directly through their official website or the retailer from whom the product was purchased. Please have your model number (10049978_46) and purchase date available when contacting support.
