Fitkit by Cult Pedalgo Mini Cycle Pedal Exerciser User Manual

Introduction

The Fitkit by Cult Pedalgo Mini Cycle Pedal Exerciser is designed for light leg and arm exercises, as well as physiotherapy at home. Its compact and portable design allows for convenient use in various settings. This manual provides instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and effective use of your exerciser.

Image: The Fitkit by Cult Pedalgo Mini Cycle Pedal Exerciser, highlighting its multi-functional design for both leg and arm workouts.

Safety Information

Please read all safety instructions before using the Fitkit Pedalgo Mini Cycle Pedal Exerciser. Failure to follow these instructions may result in injury or damage to the product.

• Consult a physician before starting any new exercise program, especially if you have pre-existing medical conditions or are undergoing physiotherapy.
• Ensure the exerciser is placed on a stable, flat surface before use. Use the provided anti-skid mat and fixing strap for enhanced stability.
• Keep children and pets away from the exerciser during operation.
• Do not stand on the exerciser. It is designed for seated leg or arm pedaling only.
• Check all parts for wear or damage before each use. Do not use if any parts are loose or damaged.
• Adjust resistance gradually to avoid sudden strain.
• Stop exercising immediately if you feel pain, dizziness, or discomfort.

Package Contents

Verify that all components are present in the package:

• 1 x Pedal Machine
• 1 x Anti-skid Mat (if included with your model)
• 1 x Fixing Strap (if included with your model)
• User Manual (this document)

Assembly and Setup

The Fitkit Pedalgo Mini Cycle Pedal Exerciser requires basic assembly. Follow these steps:

1. Unfold the Exerciser: Pull the locking pin on the main frame to unfold the base stabilizers until they click into place.
2. Attach Pedals: Screw the left and right pedals into their respective cranks. Ensure they are tightened securely. The pedals are typically marked 'L' for left and 'R' for right.
3. Insert Battery (if applicable): Open the battery compartment on the digital display unit and insert the required battery (usually AAA, not always included).
4. Positioning: Place the exerciser on a flat, stable surface. For added stability, use the provided anti-skid mat underneath and secure the exerciser with the fixing strap if necessary.

Image: The folding mechanism of the exerciser, demonstrating its compact storage capability.

Image: The exerciser positioned on an anti-skid mat, illustrating enhanced stability during use with a fixing strap.

Operating Instructions

Adjusting Resistance

The Fitkit Pedalgo features an adjustable tension knob to customize your workout intensity. Rotate the knob clockwise to increase resistance for a more challenging workout, or counter-clockwise to decrease resistance for lighter exercise or rehabilitation.

Image: A close-up view of the adjustable tension knob, used to control exercise intensity.

Using the Digital Display

The integrated digital display tracks your workout metrics. Press the red button to cycle through different modes:

• CNT (Rotation Count): Displays the total number of rotations during your current session.
• TIME (Workout Duration): Shows the elapsed time of your workout.
• CAL (Calories Burned): Estimates the calories burned during your exercise.
• RPM (Revolutions Per Minute): Indicates your current pedaling speed.
• SCAN: Automatically cycles through all metrics every few seconds.

To reset the display, press and hold the red button for a few seconds.

Image: The Smart LCD Display, illustrating the various metrics tracked during exercise.

Leg Exercises

Place the exerciser on the floor in front of a chair or sofa. Sit comfortably and place your feet into the pedal straps. Adjust the straps for a secure fit. Begin pedaling in a smooth, controlled motion. Adjust the resistance as needed.

Image: A user performing leg exercises with the Fitkit Pedalgo, demonstrating proper seated posture.

Arm Exercises

Place the exerciser on a sturdy table at a comfortable height. Sit in front of the table and grasp the pedals with your hands. Adjust the resistance to a suitable level and begin pedaling with your arms in a circular motion.

Image: A user performing arm exercises with the Fitkit Pedalgo, positioned on a table for upper body workout.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your exerciser.

• Cleaning: Wipe down the exerciser with a damp cloth after each use to remove sweat and dust. Do not use abrasive cleaners or solvents.
• Storage: When not in use, fold the exerciser for compact storage. Store it in a cool, dry place away from direct sunlight and extreme temperatures.
• Inspection: Periodically check all bolts, nuts, and moving parts to ensure they are secure. Tighten any loose components.
• Battery Replacement: If the digital display becomes dim or unresponsive, replace the battery.

Troubleshooting

Specifications

Warranty and Support

Warranty: This product comes with a 12-month warranty on manufacturing defects from the date of purchase.

Manufacturer Contact: For any queries, support, or warranty claims, please contact Cultgear Pvt.Ltd. at No 17 & 17C BDA, 3rd Sector, HSR Layout, Bangalore, Karnataka, India - 560102.

Please retain your proof of purchase for warranty validation.