REIBII B0DT4G8BXR
Contents
REIBII 5-Tier Wire Storage Shelving Unit
Model: B0DT4G8BXR
Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your REIBII 5-Tier Wire Storage Shelving Unit. Please read all instructions carefully before assembly and retain this manual for future reference.

Image: The REIBII 5-Tier Wire Storage Shelving Unit, showcasing its five wire shelves and sturdy metal posts.
Safety Information
WARNING:
- Do not exceed the maximum weight limit of 1000 lbs (200 lbs per shelf).
- Ensure proper assembly to prevent tipping.
- Use with caution around children.
- Always distribute weight evenly across shelves.
Product Features
- Dimensions: 45.5" W x 71" H x 17.7" D
- Capacity: Each shelf supports up to 200 lbs, with a total unit capacity of 1000 lbs.
- Adjustable Shelves: Shelf height can be customized to accommodate various item sizes.
- Durable Construction: Made from heavy-duty wire shelving panels and 19.1 mm diameter metal rods, reinforced for strength.
- Corrosion Resistant: Designed to resist corrosion, rust, dirt, and oxidation.
- Easy Assembly: Tool-free assembly with a simple 3-step process.

Image: Product dimensions for the 5-tier shelving unit.

Image: Visual representation of the 1000 lbs total weight capacity.
Package Contents
Before beginning assembly, ensure all components are present and undamaged. The package should contain:
- Wire Shelves (5 units)
- Vertical Support Poles (4 sections per corner, totaling 16 sections)
- Plastic Sleeve Clips (sufficient quantity for all shelves)
- Leveling Feet (4 units)
Setup and Assembly Instructions
Assembly of the REIBII 5-Tier Wire Storage Shelving Unit is designed to be simple and tool-free. Follow these steps for proper installation:
- Attach Plastic Sleeve Clips: Locate the desired height for your first shelf. Snap two halves of a plastic sleeve clip around each vertical support pole at the same height. Ensure the clips are securely locked into the grooves on the poles. Repeat for all four poles at the chosen height.
- Place the First Shelf: Carefully slide a wire shelf down over the top of the vertical support poles until it rests firmly on the plastic sleeve clips. Apply gentle downward pressure on each corner of the shelf to ensure it is fully seated and level.
- Repeat for Remaining Shelves: Repeat steps 1 and 2 for the remaining four shelves, adjusting the height of the plastic sleeve clips as desired for each shelf. Ensure all shelves are level and securely in place before loading.

Image: Visual guide for the 3-step assembly process.
Assembly Video Guide
Video: A short demonstration of the shelving unit assembly process.
Video: Another brief video illustrating the assembly of the wire shelving unit.
Operating Instructions
Adjusting Shelf Height
The shelves are fully adjustable to suit your storage needs. To adjust a shelf:
- Empty the shelf you wish to adjust.
- Lift the shelf slightly to disengage it from the plastic sleeve clips.
- Remove the plastic sleeve clips from the poles.
- Re-attach the plastic sleeve clips at the desired new height, ensuring they are level on all four poles.
- Place the shelf back onto the clips, pressing down firmly to secure it.

Image: Illustration of the height adjustable feature.
General Use
This shelving unit is suitable for various environments including pantries, kitchens, garages, basements, and living rooms. Ensure items are placed securely on the shelves and do not exceed the individual shelf or total unit weight capacity.
Video: A short video demonstrating the shelving unit in a kitchen setting, filled with various items.
Maintenance
- Cleaning: Wipe down shelves and poles with a soft, damp cloth. Avoid abrasive cleaners that may damage the powder-coated finish.
- Inspection: Periodically check all connections and ensure shelves are securely seated on the clips. Tighten leveling feet if necessary.
- Rust Prevention: While the unit is corrosion-resistant, avoid prolonged exposure to excessive moisture to maintain its finish.
Troubleshooting
- Unit is unstable/wobbly: Ensure all plastic sleeve clips are fully engaged in the pole grooves and that each shelf is pressed down firmly onto the clips. Verify the leveling feet are adjusted correctly to compensate for uneven floors.
- Shelf not sitting level: Check that all four plastic sleeve clips for the affected shelf are placed at the exact same height on the poles.
- Missing parts: If any parts are missing or damaged upon arrival, please contact REIBII customer support for assistance.
Specifications
| Attribute | Detail |
|---|---|
| Brand | REIBII |
| Model | B0DT4G8BXR |
| Product Dimensions | 17.7"D x 45.5"W x 71"H |
| Number of Shelves | 5 |
| Weight Limit (per shelf) | 200 Pounds |
| Total Weight Limit | 1000 Pounds |
| Material | Metal (Steel) |
| Finish Type | Powder Coated |
| Color | Black |
| Assembly Required | Yes (Tool-free) |
| Installation Type | Freestanding |
| Item Weight | 25 Pounds |
Warranty and Support
For warranty information or customer support, please refer to the contact details provided with your purchase or visit the official REIBII website. Keep your purchase receipt for warranty claims.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.