1. Introduction
This manual provides essential instructions for the safe installation, operation, and maintenance of your LEDVANCE 1x4 Dual Selectable Backlit LED Panel Light. This product is designed for various indoor applications, including offices, schools, hospitality, and retail environments. It features selectable color temperature (CCT) and wattage settings, offering flexibility to suit different lighting needs.
Please read this manual thoroughly before installation and retain it for future reference.
2. Safety Information
WARNING: Risk of electric shock. Disconnect power before installation or servicing. Installation should be performed by a qualified electrician in accordance with all applicable national and local electrical codes.
- Ensure the supply voltage is compatible with the fixture (120V).
- Do not install in locations where the operating temperature exceeds the fixture's rated temperature.
- This fixture is suitable for damp locations. Do not use in direct contact with water.
- Ensure proper grounding to prevent electrical hazards.
- Do not attempt to modify or disassemble the fixture. There are no user-serviceable parts inside.
3. Package Contents
Verify that all components are present before beginning installation:
- 1x LEDVANCE 1x4 Dual Selectable Backlit Panel Light
- Mounting Hardware
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | 62697 |
| Dimensions (L x W x H) | 47.8" x 12" x 1.8" |
| Wattage (Selectable) | 20W / 30W / 35W |
| Lumen Output (Selectable) | 2200 / 3300 / 3850 Lumens |
| Color Temperature (CCT Selectable) | 3500K (Warm White) / 4000K (Cool White) / 5000K (Daylight) |
| Voltage | 120V |
| Color Rendering Index (CRI) | 80 |
| Rated Lifetime | 50,000 hours |
| Dimmable | Yes (with compatible dimmer switch) |
| Material | Metal, Plastic (PMMA lenses) |
| Installation Type | Flush Mount |
| Certifications | DLC, ETL, FCC, RoHS, UL |
| Water Resistance Level | Damp Rated |
The panel's PMMA lenses are designed to resist yellowing over time, ensuring consistent light quality.
Image 1: Product Dimensions. This diagram illustrates the physical measurements of the LED panel, indicating a length of 48.7 inches and a width of 23.9 inches, which is relevant for installation planning.
5. Setup and Installation
Before installation, ensure power is disconnected at the circuit breaker. This fixture is designed for flush mounting in standard grid ceilings.
5.1. Selecting Wattage and Color Temperature (CCT)
The LED panel features selectable wattage and CCT settings, which must be chosen before installation. The selection switches are located on the back of the fixture.
- Locate the two slide switches on the back of the LED panel.
- One switch controls the wattage (20W, 30W, 35W). Select your desired brightness level.
- The other switch controls the color temperature (3500K, 4000K, 5000K). Select the desired light appearance.
Image 2: CCT and Wattage Selection Switches. This image shows the back of the LED panel with clearly visible slide switches used to adjust the color temperature (3500K, 4000K, 5000K) and wattage (20W, 30W, 35W) settings prior to installation.
5.2. Flush Mount Installation Steps
- Prepare the Opening: Ensure the ceiling grid opening is appropriate for a 1x4 FT panel.
- Disconnect Power: Turn off power at the main circuit breaker before proceeding.
- Access Wiring: Open the wiring compartment on the back of the fixture.
- Connect Wiring: Connect the building's electrical supply wires to the fixture's wires (Black to Line, White to Neutral, Green/Bare to Ground) using appropriate wire connectors. Ensure all connections are secure.
- Secure Wiring Compartment: Close the wiring compartment cover securely.
- Position Fixture: Carefully lift the LED panel into the ceiling grid opening. The edges of the panel should rest securely on the grid rails.
- Secure with Mounting Hardware: Use the provided mounting hardware to secure the panel to the ceiling grid, preventing accidental displacement.
- Restore Power: Once installation is complete and all connections are checked, restore power at the circuit breaker.
Image 3: Rear View of LED Panel. This image provides an angled view of the back of the LED panel, highlighting the wiring compartment and the integrated mounting points for secure installation within a ceiling grid.
Image 4: Side View with Mounting. This image displays a side view of the LED panel, emphasizing its slim profile and the design of the mounting brackets, which facilitate flush installation.
Image 5: Front View of LED Panel. This image presents the front surface of the LED panel, showcasing its clean, uniform appearance, which integrates seamlessly into various ceiling designs.
6. Operating Instructions
6.1. Powering On/Off
The LED panel operates like any standard light fixture. Use a wall switch connected to the fixture's power supply to turn it on or off.
6.2. Dimmability
This LED panel is dimmable. To utilize the dimming feature, ensure it is connected to a compatible LED dimmer switch (sold separately). Follow the dimmer switch manufacturer's instructions for installation and operation.
6.3. Adjusting CCT and Wattage
The color temperature and wattage settings are selected via switches on the back of the fixture during installation. If you wish to change these settings after installation, power must be disconnected, the fixture carefully removed from the ceiling, adjustments made, and then reinstalled. Refer to Section 5.1 for details on switch locations and settings.
Image 6: Selectable Color Temperatures. This image visually demonstrates the three available color temperature options: 3500K (warm white), 4000K (cool white), and 5000K (daylight), illustrating the versatility of the panel's lighting output.
7. Maintenance
The LEDVANCE LED Panel Light requires minimal maintenance.
- Cleaning: Ensure the power is off before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface of the panel. Do not use abrasive cleaners, solvents, or cleaners containing ammonia, as these can damage the fixture.
- Inspection: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
8. Troubleshooting
If you experience issues with your LED panel, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply; Loose wiring; Faulty switch | Check circuit breaker; Verify wiring connections; Test switch functionality. |
| Light flickers | Incompatible dimmer switch; Loose wiring; Voltage fluctuations | Ensure compatible LED dimmer; Check wiring; Consult electrician for voltage issues. |
| Incorrect CCT or brightness | CCT/Wattage switches set incorrectly | Disconnect power, remove fixture, and adjust the CCT/Wattage switches on the back of the panel. |
| Uneven light distribution | Obstruction or internal issue | Ensure no obstructions are blocking the light output. If issue persists, contact support. |
If troubleshooting steps do not resolve the issue, contact LEDVANCE customer support.
9. Warranty and Support
The LEDVANCE 1x4 Dual Selectable Backlit LED Panel Light is backed by a 5-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use and service.
For warranty claims, technical assistance, or any questions not covered in this manual, please contact LEDVANCE customer support. Keep your purchase receipt as proof of purchase.
For more information, visit the official LEDVANCE website or contact their customer service department.
