1. Safety Information
Please read and understand all instructions before assembly and use. Keep this manual for future reference.
- Always follow the assembly instructions carefully to prevent instability.
- Be cautious around sharp metal edges during assembly and use.
- Ensure all bolts and screws are securely tightened before use.
- Do not exceed the maximum weight capacity of 600 pounds.
- Keep children away from the assembly area.
2. Product Overview
The GAOMON 6 Inch Low Profile Queen Metal Platform Bed Frame provides a sturdy and noise-free foundation for your mattress. Its minimalist design complements various room styles, and it eliminates the need for a box spring.

Figure 2.1: Assembled GAOMON Queen Metal Platform Bed Frame.
Key Features:
- Sleek Minimalistic Design: Black finish to complement various room styles.
- Robust Construction: Made with 100% metal body frame, metal slats, and iron screw structures for durability.
- Noise-Free Sleep: Engineered to prevent noise for a peaceful sleeping environment.
- No Box Spring Needed: Sturdy metal slats provide direct mattress support.
- Low Profile: 6-inch height for a modern look and easy access.

Figure 2.2: Product Dimensions and Weight Capacity.
3. Package Contents
Before beginning assembly, ensure all parts and hardware are present. Refer to the included installation manual for a detailed list of components.
- Bed frame sections (side rails, center support, end rails)
- Metal slats
- Support legs
- Hardware pack (screws, bolts, washers, Allen wrench)
- Anti-slip mattress retainers
- Floor protection pads
4. Assembly Instructions
Assembly typically takes 20-30 minutes for one person. Follow these general steps, referring to your specific included manual for detailed diagrams and part numbers.
- Unpack and Identify Parts: Lay out all components on a clean, soft surface to prevent scratches. Verify all parts against the packing list in your manual.
- Assemble the Frame: Connect the side rails and end rails using the provided bolts and the Allen wrench. Ensure all connections are snug but do not overtighten initially.
- Attach Support Legs: Securely attach the support legs to the designated points on the frame.
- Install Center Support: Attach the center support beam(s) to the frame, ensuring proper alignment.
- Place Metal Slats: Lay the metal slats across the frame. Many designs feature snap-in or bolt-on slats. Ensure they are evenly spaced and securely fastened.
- Install Anti-Slip Retainers: Attach the anti-slip mattress retainers to the head and foot of the frame. These prevent the mattress from sliding.
- Final Tightening: Once the entire frame is assembled, go back and securely tighten all bolts and screws.
- Apply Floor Protection: Attach the provided floor protection pads to the bottom of each leg to prevent scratching your floor.

Figure 4.1: Detail of Robust Structure and Floor Protection.

Figure 4.2: Secure Corner Connection.

Figure 4.3: Low Profile Design with 4.5 inch clearance.
5. Operating Instructions
This bed frame is designed for direct mattress placement. No box spring is required, as the metal slats provide ample support. The low-profile design offers a modern aesthetic and allows for approximately 4.5 inches of under-bed clearance for minimal storage.

Figure 5.1: Stable Foundation and Easy Assembly.
6. Maintenance
- Cleaning: Wipe down the metal frame with a damp cloth and mild detergent. Avoid abrasive cleaners.
- Regular Checks: Periodically inspect all bolts and connections to ensure they remain tight. Retighten if necessary to maintain stability and prevent noise.
- Floor Protection: Ensure the floor protection pads are intact and in place to prevent floor damage. Replace if worn.
7. Troubleshooting
- Squeaking Noise: Check all bolts and connections. Tighten any loose hardware. Ensure slats are properly seated.
- Mattress Sliding: Verify that the anti-slip mattress retainers are correctly installed at the head and foot of the frame.
- Instability: Ensure all legs are making firm contact with the floor and that all frame sections are correctly interlocked and tightened.
8. Specifications
| Feature | Detail |
|---|---|
| Size | Queen |
| Material | Metal |
| Product Dimensions (L x W x H) | 79.9" x 60.4" x 6" |
| Style | 6 Inch Low Profile |
| Maximum Weight Capacity | 600 Pounds |
| Color | Black |
| Assembly Required | Yes |
| Box Spring Required | No |
9. Warranty and Support
For warranty information, technical support, or to order replacement parts, please contact GAOMON customer service through the retailer where the product was purchased. Keep your purchase receipt and product model number handy for faster service.