tenlamp G10 PKPRO Podcast Equipment Bundle Instruction Manual

Introduction

The tenlamp G10 PKPRO Podcast Equipment Bundle is a comprehensive audio solution designed for live streaming, podcasting, recording, gaming, and singing. This versatile system integrates a 3.5mm microphone with a live sound card and audio interface mixer, offering a range of features for enhanced audio production across various platforms including PC, smartphones, and tablets.

Image: The tenlamp G10 PKPRO Podcast Equipment Bundle, featuring the mixer, microphone, and various cables, set up on a desk.

What's in the Box

The tenlamp G10 PKPRO Podcast Equipment Bundle includes the following components:

• PKPRO Microphone
• G10 Sound Board (Mixer)
• Power Cable
• Headset
• Connecting Line (3.5mm audio cable)
• Microphone XLR Cable
• OTG Cable
• Microphone Stand

Image: All components of the tenlamp G10 PKPRO bundle laid out on a surface, including the mixer, microphone, cables, and accessories.

Product Features and Controls

The G10 PKPRO mixer features a user-friendly interface with a high-definition display and various controls for precise audio management. The device is designed with a folding screen for adjustable viewing angles.

Key Features:

• Dual DSP 32-bit RISC Processor: For fast and efficient audio processing.
• High-Definition Display: Shows real-time levels for power, reverb, monitor, denoise, mic, and music.
• Folding Design: Adjustable screen angle for optimal viewing.
• 4000mAh Large Battery: Provides up to 12 hours of continuous usage.
• Smart Noise Reduction: Enhances vocal clarity by filtering ambient noise.
• Ducking Feature: Automatically lowers background music when speaking.
• Voice Changer: Offers 4 voice variations (male, female, baby, uncle).
• 16 Built-in Effects: Interactive sound effects for live streaming.
• 12-Step Auto-Tune: For pitch correction.
• 5 Preset Reverb Modes: Original, KTV, Chat, MC, Livestream.
• Custom Mode: Save personalized sound settings.

Controls Overview:

• Mic Knob: Adjusts microphone volume.
• Music Knob: Adjusts background music volume.
• High, Mid, Low Knobs: 3-band equalizer for microphone sound effects.
• INST, Speaker Knobs: Adjust volume for input devices connected to corresponding rear ports.
• Timbre Knob: Adjusts timbre level of the current voice.
• Pitch Knob: Adjusts pitch level of the current voice (recommended for voice changer mode).
• Auto-tune Knob: Adjusts tune intensity (for 12-step auto-tune tunes).
• Reverb Depth/Length Faders: Adjust sense of space and tail of the sound.
• Main Output Fader: Controls total audio volume output to live broadcast room or recording.
• Monitor Output Fader: Controls headphone volume only.
• Power/Loopback Button: Long press to turn mixer on/off; short press to toggle loopback feature.
• Denoise Button: Short press to cycle through 3 denoise modes (Level 1, Level 2, Headphone Denoise); long press to turn denoise off.
• BT Button: Short press to turn Bluetooth on/off.
• BGM Button: Short press to cycle through 2 built-in modes that cut up to 85% of vocals from audio input.
• Reverb Preset Button: Short press to cycle through preset reverb modes.
• Voice Changer Button: Short press to cycle through voice changer modes (male, female, baby, uncle).
• MON Button: Short press to toggle direct monitoring on/off for all mic audio.
• MUTE Button: Disables mic audio pass-through.
• Custom Mode Storage Button: Short press to save current sound parameters (up to 19 modes).
• Custom Mode Delete Button: Short press to delete saved custom voice modes.
• Numeric Keys (1-12): Short press to play built-in sound effects; long press to switch to corresponding custom mode.
• Transport Controls (Previous/Next Song, Play/Pause): For Bluetooth music accompaniment.

Image: Detailed view of the mixer's control panel, highlighting voice changer, noise reduction, and 16 preset interactive effects.

Image: Diagram illustrating the various input and output ports on the back of the tenlamp G10 PKPRO mixer, including USB-C, 48V Mic, 3.5mm inputs, and headset ports.

Setup Instructions

1. Connecting to a Mobile Phone for Music Playback

You can connect your mobile phone to the G10 PKPRO mixer for background music playback using either Bluetooth or a 3.5mm audio cable.

Bluetooth Connection (Recommended):

1. Ensure the G10 PKPRO mixer is powered on.
2. On your mobile phone, enable Bluetooth.
3. Search for