1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Delta Faucet 7-Setting In2ition 2-in-1 Dual Shower Head. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. Retain this manual for future reference.
2. Safety Information
Observe the following safety precautions to prevent injury or damage to the product:
- Always turn off the main water supply before beginning any installation or maintenance.
- Wear appropriate personal protective equipment, such as safety glasses, during installation.
- Ensure all connections are secure to prevent leaks.
- Do not overtighten connections, as this may damage the product.
- If you are unsure about any part of the installation process, consult a qualified plumber.
3. Package Contents
Verify that all components are present before beginning installation:
- Shower Head
- Hand Shower
- Hose
4. Setup and Installation
4.1 Before You Begin
Ensure you have the following tools ready:
- Adjustable wrench
- Plumber's tape
- Soft cloth
4.2 Installation Steps
This shower head is designed for wall-mounted installation. Follow these general steps:
- Turn off the water supply to your shower.
- Remove your existing shower head by unscrewing it counter-clockwise from the shower arm.
- Clean any old plumber's tape or debris from the shower arm threads.
- Apply new plumber's tape clockwise around the threads of the shower arm.
- Screw the new Delta In2ition shower head onto the shower arm by hand until snug. Use an adjustable wrench for a final quarter-turn, being careful not to overtighten.
- Connect the shower hose to the hand shower and the designated port on the main shower head. Ensure all connections are hand-tight, then use a wrench for a slight additional turn if necessary.
- Turn on the water supply and check for leaks. Tighten connections slightly if leaks are present.
5. Operating Instructions
5.1 Using the 2-in-1 Dual Shower
The Delta In2ition shower head offers versatile functionality:
- Integrated Use: The hand shower is securely docked within the main shower head, allowing both to operate simultaneously for a full showering experience.
- Detached Use: Gently pull the hand shower from its magnetic dock to use it separately. Water will flow from the hand shower only.
- Switching Flow: A diverter lever or button on the shower head allows you to switch between main shower head only, hand shower only, or both.
5.2 Spray Settings
Your Delta In2ition shower head features 7 powerful spray options. Rotate the dial on the shower head to select your desired setting:
- ProClean Spray: A high-pressure, focused spray designed for cleaning shower surfaces.
- H2Okinetic PowerDrench Spray: Provides a powerful, wide coverage spray with larger water droplets for intensity and warmth.
- Full Body Spray: A traditional, invigorating full coverage spray.
- Massaging Spray: A pulsating spray for a relaxing massage.
- Shampoo Rinsing Spray: Optimized for efficient rinsing of shampoo from hair.
- Shampoo With Massage Spray: Combines shampoo rinsing with a gentle massage.
- Pause: Reduces water flow to a trickle, allowing you to lather or shave while maintaining water temperature.
5.3 ProClean Spray Function
The ProClean spray is specifically designed for cleaning. It delivers a powerful, high-pressure stream that helps remove soap scum and other shower messes from tile and other surfaces at least two times faster than standard sprays. This feature allows for quick cleaning of hard-to-reach areas without needing to step into the shower.
5.4 Magnatite Docking
The hand shower features Magnatite Docking, a powerful integrated magnet that ensures the hand shower securely docks back into place every time, preventing sagging over time.
6. Maintenance
6.1 Cleaning the Shower Head
Your Delta In2ition shower head is equipped with Touch-Clean spray holes. To remove mineral residue and maintain optimal spray performance:
- Simply wipe away any mineral buildup from the soft rubber spray holes with your finger or a soft cloth.
- No soaking or chemical cleaners are required for this process.
6.2 Finish Care
The Lumicoat finish on your Delta shower head is designed to stay cleaner longer and resist water spots. To clean the finish:
- Wipe the surface with a soft, damp cloth.
- Avoid using abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
7. Troubleshooting
Refer to the table below for common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water pressure | Mineral buildup in spray holes; partially closed shut-off valve; clogged water lines. | Clean Touch-Clean spray holes; ensure shut-off valves are fully open; consult a plumber for clogged lines. |
| Leaks from connections | Loose connections; insufficient plumber's tape; damaged washer. | Tighten connections; reapply plumber's tape; replace washer if damaged. |
| Hand shower does not dock securely | Debris on magnetic surface; magnet issue. | Clean magnetic surfaces; contact support if magnet is faulty. |
| Water temperature issues | Water heater settings; plumbing issues. | Check water heater settings; consult a plumber for persistent issues. |
8. Specifications
- Brand: Delta
- Model Number: 58651-CZ-PR
- Material: Plastic
- Finish Type: Brushed (Lumicoat Champagne Bronze)
- Installation Type: Wall Mounted
- Number of Settings: 7
- Efficiency: 2.5 GPM (Gallons Per Minute)
- Product Dimensions: 12.13"L x 7.88"W
- Item Weight: 3.76 pounds
- UPC: 195205149583
9. Warranty and Support
Your Delta Faucet 7-Setting In2ition 2-in-1 Dual Shower Head is backed by Delta's Lifetime Limited Warranty. This warranty covers defects in material and workmanship for as long as the original consumer purchaser owns the home in which the product was first installed.
For detailed warranty information, technical assistance, or to order replacement parts, please contact Delta Faucet Company customer support. Refer to the official Delta Faucet website for current contact information.
