BANTI 40x24 Inch Electric Standing Desk with Drawer User Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your BANTI 40x24 Inch Electric Standing Desk with Drawer. Please read this manual thoroughly before use to ensure proper function and longevity of your product.

2. Safety Information

• Ensure all components are securely fastened before use.
• Keep children and pets away from the desk during height adjustments.
• Do not overload the desk. The maximum weight recommendation is 155 pounds.
• Avoid placing liquids directly on the control panel or near electrical components.
• If any unusual sounds or movements occur, discontinue use and consult the troubleshooting section or contact support.

3. Setup and Assembly

Assembly of the BANTI Electric Standing Desk is required. The desk features a two-piece desktop and requires careful configuration of the legs and motor bar. An installation video and electronic manual are available for guidance. It is recommended that one person performs the assembly.

3.1 Included Components

• 1 Drawer
• 1 Installation Instruction Manual (electronic version available)
• Headphone Hook
• 2 Hooks
• 2 Height-Adjustable Feet

3.2 Assembly Steps (Overview)

1. Unpack all components and verify against the parts list.
2. Assemble the desktop sections.
3. Attach the desk legs and motor bar according to the detailed instructions provided in the separate installation guide.
4. Install the drawer, headphone hook, and adjustable feet.
5. Connect the power cord to the desk and a power outlet.

Image: The BANTI Electric Standing Desk with its integrated drawer and headphone hook.

Image: Components laid out for assembly, with an instruction manual visible.

3.3 Cable Management

The desk includes cutouts on the back of the desktop to help organize and route cables, maintaining a neat workspace.

3.4 Mobility

The desk is equipped with adjustable feet for stability. It does not include wheels. If mobility is desired, compatible wheels may be purchased separately and installed.

4. Operating Instructions

Your BANTI Electric Standing Desk allows for smooth and quiet height adjustments to transition between sitting and standing positions.

4.1 Height Adjustment

The desk's height can be adjusted from a minimum of 28.3 inches to a maximum of 46.5 inches. Use the control panel located on the underside of the desktop to operate the desk.

Image: Close-up of the desk's control panel with up/down arrows and memory buttons.

Control Panel Functions:

• Up/Down Buttons (Arrows): Press and hold to continuously adjust the desk height.
• Memory Buttons (1, 2): Save up to two preferred height settings. To save a height, adjust the desk to the desired level, then press and hold a memory button (1 or 2) until the display confirms the setting is saved. To recall a saved height, simply press the corresponding memory button.
• Reset Function: If the desk encounters issues or needs recalibration, press and hold the DOWN button on the control panel for 5 seconds to initiate a reset.

Image: The desk shown at various heights, demonstrating its adjustable range.

4.2 Anti-Collision Technology

The desk is equipped with an anti-collision system. If the desk encounters an obstacle during the lifting or lowering process, it will automatically stop and move approximately 2 centimeters in the opposite direction to prevent damage to the desk or objects.

Image: Illustration of the anti-collision system detecting an obstacle and reversing direction.

4.3 Quiet Operation

The electric motor operates quietly, with noise levels below 50dB, ensuring minimal disruption during adjustments.

5. Maintenance

To ensure the longevity and proper function of your BANTI Electric Standing Desk, follow these simple maintenance guidelines:

• Cleaning: Wipe the desk surface with a dry cloth. Avoid abrasive cleaners or harsh chemicals that could damage the laminated finish.
• Drawer Care: The leather drawer is designed with a waterproof function. Clean with a damp cloth if necessary, then dry thoroughly.
• Regular Checks: Periodically check all screws and connections to ensure they remain tight.
• Cable Management: Ensure cables are neatly organized and not pinched during height adjustments.

6. Troubleshooting

If you encounter any issues with your BANTI Electric Standing Desk, please refer to the following common solutions:

• Desk Not Moving:
• Check if the power cord is securely plugged into both the desk and a working wall outlet.
• Perform a reset by pressing and holding the DOWN button on the control panel for 5 seconds.
• Uneven Height Adjustment:
• Ensure the desk is placed on a level surface.
• Check that the adjustable feet are properly balanced and tightened.
• Anti-Collision System Triggering Frequently:
• Ensure there are no obstructions above or below the desk during movement.
• Clear any items that might be interfering with the desk's path.
• Memory Settings Not Saving/Recalling:
• Ensure you press and hold the memory button until the setting is confirmed.
• If issues persist, try a full reset of the desk.

For issues not covered here, please contact BANTI customer service.

7. Specifications

8. Warranty

This BANTI Electric Standing Desk is covered by a Limited Warranty. Please refer to the warranty documentation included with your purchase for specific terms and conditions.

9. Customer Support

For any questions, concerns, or assistance with your BANTI Electric Standing Desk, please contact our customer service team. We are committed to providing support for product usage and any issues you may encounter.

Contact information can typically be found on the BANTI official website or through your purchase platform.