1. Product Overview
The Oneach Arc Floor Lamp, Model AMZ-F1244GL, is designed to provide ambient lighting for indoor spaces. It features a hand-woven rattan shade, a gold metal base and pole, and a convenient foot switch for operation. This lamp is suitable for various rooms including living rooms, bedrooms, and offices, offering a blend of rustic and contemporary aesthetics.
The lamp's design emphasizes soft, filtered light, making it ideal for secondary illumination or creating a warm, relaxing atmosphere. It is not intended as a primary light source.
2. Safety Information
- Ensure the lamp is unplugged before assembly, cleaning, or bulb replacement.
- Use only E26 standard base bulbs. Do not exceed 60 watts for incandescent bulbs or 9 watts for LED bulbs.
- Place the lamp on a stable, level surface to prevent tipping.
- Keep the power cord away from heat sources, sharp edges, and wet areas.
- Do not operate the lamp with a damaged cord or plug. Contact customer support for assistance.
- This product is for indoor use only. Do not expose to water or high humidity.
3. Package Contents
Verify that all components are present before beginning assembly:
- Lamp Shade (Hand-woven rattan)
- Lamp Body (Multiple pole sections with integrated wiring)
- Lamp Base (Weighted metal base)
- Foot Switch (Integrated into the power cord)
- Instruction Manual
4. Setup and Assembly
Assembly of the Oneach Arc Floor Lamp is straightforward and typically takes less than 10 minutes. No additional tools are required.
- Attach the Lamp Base: Place the lamp base on a flat surface. Carefully feed the power cord through the center of the base. Screw the first pole section of the lamp body into the threaded rod on the lamp base. Ensure it is securely tightened.
- Assemble the Lamp Pole: Continue screwing the remaining pole sections together, ensuring each connection is firm. The internal wiring will guide through the poles.
- Install the Lamp Shade: Once the entire lamp pole is assembled, locate the plastic retaining ring on the lamp socket at the top of the arc. Unscrew this ring. Place the rattan lamp shade over the socket, then screw the retaining ring back on to secure the shade in place.
- Insert the Light Bulb: Screw an E26 base light bulb (not included) into the lamp socket. Do not overtighten.
- Connect to Power: Plug the lamp's power cord into a standard electrical outlet.
5. Operation
The Oneach Arc Floor Lamp is operated using a convenient foot switch located on the power cord.
- To turn the lamp ON, gently press the foot switch with your foot.
- To turn the lamp OFF, press the foot switch again.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your lamp.
- Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the metal pole and base. For the rattan shade, gently dust with a soft brush or cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish.
- Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled down before attempting to replace it. Unscrew the old bulb and screw in a new E26 standard base bulb (max 60W incandescent or 9W LED).
- Inspection: Periodically check the power cord and plug for any signs of damage. Ensure all pole connections remain tight.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on | 1. Lamp unplugged 2. Bulb loose or burnt out 3. Power outlet malfunction | 1. Ensure plug is fully inserted into outlet. 2. Tighten or replace bulb. 3. Test outlet with another device. |
| Lamp flickers | 1. Loose bulb 2. Incompatible bulb type 3. Loose connection in pole | 1. Tighten bulb. 2. Ensure bulb is E26 base and within wattage limits. 3. Check pole connections for tightness. |
| Lamp is unstable | 1. Base not on level surface 2. Pole sections not fully tightened | 1. Move lamp to a level surface. 2. Disassemble and re-tighten all pole sections. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | AMZ-F1244GL |
| Brand | Oneach |
| Product Dimensions | 17"D x 12"W x 12"H (Shade dimensions are 13" diameter, overall height 62.5") |
| Item Weight | 11.49 pounds (5.22 Kilograms) |
| Material | Metal, Rattan, Wicker |
| Finish Type | Polished |
| Base Material | Metal |
| Bulb Base | E26 |
| Max Wattage | 60 watts (incandescent) / 9 watts (LED) |
| Switch Type | Foot Switch |
| Power Source | Corded Electric |
| Indoor/Outdoor Usage | Indoor |
9. Warranty and Support
All Oneach lamps are covered by a one-year warranty from the date of purchase. If you encounter any issues or have questions regarding your product, please contact Oneach customer support. We are committed to ensuring your satisfaction.
For support, please refer to the contact information provided on the product packaging or visit the official Oneach website.
