KEMEI KM-264 Hair Trimmer and KM-2024 Foil Shaver User Manual

1. Introduction

Thank you for choosing the KEMEI KM-264 Hair Trimmer and KM-2024 Foil Shaver grooming set. This manual provides essential information for the safe and effective operation, maintenance, and care of your new devices. Please read these instructions thoroughly before first use and retain them for future reference.

2. Product Overview

2.1 Package Contents

• 1 x KEMEI KM-264 Cordless Hair Trimmer with LCD Digital Display
• 1 x KEMEI KM-2024 Dual Foil Razor
• 4 x Clipper Guide Combs (1.5mm, 3mm, 4.5mm, 6mm)
• 2 x Cleaning Brushes
• 2 x USB Charging Cables
• 1 x Storage Pouch
• 1 x Lubricating Oil Bottle

Figure 1: KEMEI KM-264 Hair Trimmer, KM-2024 Foil Shaver, and included accessories.

2.2 Key Features

• KM-264 Hair Trimmer:
  • Powerful 6500 RPM motor for consistent trimming.
  • Zero-clearance T-blades for precise cuts.
  • LED display showing RPM and remaining battery time.
  • 1400 mAh Li-Ion battery with 2.5-hour charge for 180 minutes of use.
  • Ergonomic design for comfortable handling.
• KM-2024 Foil Shaver:
  • Intelligent dual floating shaving heads.
  • Slim and smooth foil blade mesh for contouring.
  • Waterproof design for wet and dry use (charging port must be closed).
  • 8-hour charge for 50 minutes of use.

Figure 2: Detailed view of KEMEI KM-264 Hair Trimmer features.

Figure 3: Detailed view of KEMEI KM-2024 Foil Shaver features.

3. Setup and Charging

3.1 Initial Charge

Before first use, fully charge both the KM-264 Hair Trimmer and KM-2024 Foil Shaver.

• KM-264 Hair Trimmer: Connect the USB charging cable to the trimmer and a suitable USB power adapter (not included). The LED display will indicate charging status. A full charge takes approximately 2.5 hours and provides up to 180 minutes of use.
• KM-2024 Foil Shaver: Connect the USB charging cable to the shaver and a suitable USB power adapter. A full charge takes approximately 8 hours and provides up to 50 minutes of use.

Figure 4: USB charging for the KEMEI KM-264 Hair Trimmer.

3.2 Attaching Guide Combs (KM-264 Trimmer)

To adjust hair length, select one of the four guide combs (1.5mm, 3mm, 4.5mm, 6mm). Align the comb with the trimmer blade and push it firmly until it clicks into place. To remove, gently pull the comb away from the blade.

Figure 5: Guide combs for the KM-264 Trimmer and detachable head of the KM-2024 Shaver.

4. Operating Instructions

4.1 Using the KM-264 Hair Trimmer

1. Ensure the trimmer is fully charged.
2. Attach the desired guide comb for the desired hair length, or use without a comb for a close trim.
3. Press the ON/OFF switch to power on the trimmer. The LED display will show RPM and remaining battery.
4. Hold the trimmer against the hair, moving it slowly and steadily against the direction of hair growth.
5. For detailing or outlining, remove the guide comb and use the T-blade directly.
6. After use, turn off the trimmer and clean the blades.

Figure 6: Examples of KEMEI KM-264 Trimmer applications.

4.2 Using the KM-2024 Foil Shaver

1. Ensure the shaver is fully charged.
2. Press the ON/OFF button to activate the shaver.
3. Hold the shaver at a right angle to your skin and move it in short, circular motions or straight strokes against the direction of hair growth.
4. The dual floating heads will adapt to your facial contours for a close shave.
5. The shaver can be used for dry shaving or with shaving foam/gel for a wet shave. Ensure the charging port cover is securely closed if using wet.
6. After use, turn off the shaver and clean the foil head.

5. Maintenance and Cleaning

5.1 Cleaning the KM-264 Hair Trimmer

1. Turn off and unplug the trimmer.
2. Remove the guide comb.
3. Use the small cleaning brush to remove loose hairs from the blades and the trimmer body.
4. For a more thorough clean, the blade head can be carefully detached and rinsed under running water. Ensure the trimmer body does not get wet if it's not specified as fully waterproof.
5. Allow all parts to air dry completely before reattaching the blade head.
6. Apply a few drops of the provided lubricating oil to the blades after every few uses to maintain performance.

5.2 Cleaning the KM-2024 Foil Shaver

1. Turn off the shaver.
2. Press the release button to detach the foil head.
3. Use the cleaning brush to remove hair clippings from the foil and the cutter block.
4. The foil head and cutter block can be rinsed under running water. Ensure the charging port cover is securely closed before rinsing the shaver body.
5. Allow all parts to air dry completely before reattaching the foil head.

Figure 7: Waterproof cleaning of the KEMEI KM-2024 Foil Shaver. Remember to close the charging port.

6. Troubleshooting

7. Specifications

8. Safety Information

• Keep the devices dry, especially the KM-264 Trimmer, unless specifically cleaning the blades. The KM-2024 Shaver is waterproof, but ensure the charging port is sealed when wet.
• Do not immerse the KM-264 Trimmer in water.
• Keep out of reach of children.
• Do not use if blades or foils are damaged, as this may cause injury.
• Only use the provided USB cables for charging.
• Do not attempt to disassemble or repair the devices yourself. Contact qualified personnel for service.
• Avoid using the devices on irritated or broken skin.
• Unplug the devices before cleaning.

9. Warranty and Support

For warranty information or technical support, please refer to the warranty card included with your product or contact KEMEI customer service directly. Please have your model numbers (KM-264, KM-2024) and purchase details ready when contacting support.

You can often find contact information on the official KEMEI website or through your retailer.