BOTSLAB G980H Kit 4K+2K Front and Rear Dash Camera User Manual

1. Package Contents

Please verify that all items listed below are included in your package. If any items are missing or damaged, please contact customer support.

• 1 x BOTSLAB G980H 4K Front Dash Camera
• 1 x 2K 360° Rotatable Rear Camera (with 6-meter extension cable)
• 1 x Hardwire Kit (for 24/7 Parking Monitoring)
• 1 x Car Charger (3-meter Type-C cable)
• 1 x 64GB MicroSD Card
• 2 x Electrostatic Film
• 1 x Mounting Lever
• 1 x User Manual

This image displays the complete BOTSLAB G980H Kit, featuring the main front dash camera unit, the smaller rear camera, and various accessories like cables and mounts.

2. Installation

2.1 Mounting the Front Camera

1. Clean the windshield thoroughly where the dash camera will be mounted.
2. Apply the electrostatic film to the chosen area on the windshield. This helps in easy removal and prevents adhesive residue.
3. Attach the 3M adhesive mount to the electrostatic film. Ensure it is firmly pressed for secure adhesion.
4. Slide the BOTSLAB G980H front dash camera onto the mount. Adjust the camera angle to ensure a clear view of the road ahead.

A detailed view of the BOTSLAB G980H front dash camera, highlighting its compact design and lens.

2.2 Installing the Rear Camera

1. Identify a suitable location on your rear windshield for the rear camera, ensuring an unobstructed view.
2. Clean the chosen area on the rear windshield.
3. Attach the rear camera using its adhesive mount.
4. Connect the rear camera to the front dash camera using the provided 6-meter extension cable. Route the cable neatly along the vehicle's interior trim.
5. The rear camera can be rotated 360° for optimal positioning.

2.3 Hardwire Kit Installation (for 24/7 Parking Monitoring)

The included hardwire kit enables 24/7 parking monitoring and protects your vehicle's battery from deep discharge. Professional installation is recommended for this component.

1. Connect the hardwire kit to your vehicle's fuse box according to the wiring diagram provided in the hardwire kit's specific manual.
2. Ensure the Type-C USB connector from the hardwire kit is connected to the dash camera's power input.
3. Route the hardwire cable discreetly to avoid interference with driving.

The BOTSLAB hardwire kit, including the Type-C USB cable and power module, essential for enabling 24/7 parking monitoring.

2.4 Initial Setup and Firmware Update

1. Insert the included 64GB MicroSD card into the dash camera's SD card slot. Ensure it is inserted correctly until it clicks.
2. Power on the dash camera by connecting it to your vehicle's power source (either via the car charger or the hardwire kit).
3. Before first use, it is recommended to update the dash camera's firmware to the latest version. This can be done via the BOTSLAB app. Refer to the 'Firmware Updates' section for detailed instructions.
4. Format the MicroSD card through the camera's settings menu or the BOTSLAB app to ensure optimal performance.

3. Connecting to the BOTSLAB App

The BOTSLAB app allows you to manage settings, view live footage, download recordings, and update firmware.

1. Download the "BOTSLAB" app from the App Store (iOS) or Google Play Store (Android).
2. Register and log in to your BOTSLAB account.
3. On the dash camera, enable Wi-Fi.
4. On your smartphone, connect to the dash camera's Wi-Fi network. The network name (SSID) and password will be displayed on the dash camera screen.
5. Open the BOTSLAB app and follow the on-screen instructions to add your device.

Note: The dash camera uses 5GHz Wi-Fi for faster transmission. The Wi-Fi range is approximately 3 to 5 meters. Remote access is not supported.

An image of a smartphone showing the BOTSLAB app icon, used for managing dash camera settings and viewing recordings.

4. Operating Instructions

4.1 Basic Operation

• Power On/Off: The camera automatically powers on and begins recording when your vehicle starts, and powers off when the ignition is turned off.
• Recording: Continuous loop recording starts automatically upon power-on.
• Display: The 3.18-inch IPS screen displays live footage from both front and rear cameras.

4.2 Recording Features

• Loop Recording: When the MicroSD card is full, new recordings automatically overwrite the oldest unlocked files.
• G-Sensor (Emergency Recording): The built-in G-sensor detects sudden vibrations or impacts (e.g., collisions). In such events, the current video segment is automatically locked and protected from being overwritten.

4.3 Advanced Driver-Assistance System (ADAS)

The ADAS feature provides real-time alerts to enhance driving safety:

• Forward Vehicle Warning: Alerts you if you are too close to the vehicle in front.
• Pedestrian Detection Warning: Notifies you of pedestrians in close proximity.
• Lane Departure Warning: Warns if your vehicle drifts out of its lane.
• Fatigue Driving Reminder: The camera will remind you to take a break every 2 hours of continuous driving.

4.4 24/7 Parking Monitoring

With the hardwire kit installed, the dash camera provides continuous surveillance even when your vehicle is parked. It uses a supercapacitor for reliable power in extreme temperatures (-20°C to 70°C), eliminating fire risks associated with battery-based dash cams. The system features low voltage protection to prevent draining your vehicle's battery.

4.5 GPS and WiFi Functionality

• GPS: Records your vehicle's current speed and GPS position. It also automatically corrects the time by synchronizing with satellites.
• 5GHz WiFi: Provides a faster connection to your smartphone for improved live preview, quicker video downloads, and easier sharing of footage via the BOTSLAB app.

4.6 Night Vision and WDR

The front dash camera is equipped with a Starvis sensor, a powerful 6-layer F1.5 aperture lens, and Wide Dynamic Range (WDR) technology. This combination balances bright and dark areas in recordings, ensuring clear images and enhanced safety during night driving.

5. Maintenance

5.1 SD Card Management

• Capacity: The camera supports MicroSD cards up to 256GB. A 64GB card is included.
• Recommendation: For optimal performance and reliability, use Class 10 or higher endurance MicroSD cards from trusted brands like Samsung or SanDisk.
• Formatting: Regularly format the MicroSD card (at least once a month) through the camera's settings or the BOTSLAB app to maintain performance and prevent data corruption.

5.2 Firmware Updates

Periodically check for and install firmware updates via the BOTSLAB app. Updates often include performance improvements, bug fixes, and new features, such as additional language support.

5.3 Cleaning

• Gently wipe the camera lenses with a soft, lint-free cloth to ensure clear recordings.
• Clean the camera body with a dry or slightly damp cloth. Avoid using harsh chemicals or abrasive materials.

6. Troubleshooting

7. Technical Specifications

8. Warranty and Customer Support

8.1 Warranty Information

The BOTSLAB G980H Kit comes with a standard 2-year manufacturer's warranty. Additionally, you can enjoy an extra 6-month warranty extension, totaling 2.5 years of coverage. This includes free replacement for quality-related issues.

8.2 Customer Support

For any questions, technical assistance, or warranty claims, BOTSLAB offers comprehensive customer support:

• Live Chat: Access 24-hour online support through the BOTSLAB app: Open App > Register & Log In > Support > Live Chat.
• Email Support: Contact us at service@botslab.com.
• Website: Visit our official website for FAQs and resources: global.botslab.com.
• Community: Join the Botslab Users Group on Facebook for peer support and updates.

Necessary accessories are available through customer service. We provide multi-language menus and user manuals.

An image detailing BOTSLAB's customer service offerings, including quality guarantee, technical support, and return policy.