1. Introduction
Thank you for choosing the Zigma Y80 Robotic Pool Surface Skimmer. This device is designed to efficiently clean the surface of your pool, removing debris such as leaves, insects, and dust, utilizing both solar and adapter charging options. Please read this manual thoroughly before operating the device to ensure proper use, maintenance, and safety.
2. Safety Information
- Always ensure the device is turned off and disconnected from the power adapter before performing any maintenance or cleaning.
- Keep the device away from children and pets when in operation or charging.
- Do not operate the device if any part is damaged. Contact customer support for assistance.
- Use only the provided power adapter for charging.
- Avoid submerging the entire unit. It is designed for surface cleaning only.
- Do not attempt to open or repair the device yourself. This may void the warranty and cause damage.
3. Package Contents
Please check the package for the following items:
- Zigma Y80 Robotic Pool Surface Skimmer Unit
- Power Adapter
- User Manual
- Debris Collection Basket (pre-installed)
4. Product Overview and Features
The Zigma Y80 is an advanced robotic pool surface skimmer designed for efficient and eco-friendly pool maintenance. Key features include:
- Dual Charging Options: The device can be charged via its integrated solar panel or using the provided power adapter for faster charging.
- Powerful Cleaning Performance: Effectively removes floating debris from the water surface.
- High and Low Speed Modes: Adaptable cleaning intensity for various debris levels.
- 6L Large Capacity Debris Basket: Reduces the frequency of emptying, making maintenance easier.
Dual Charging Options: The Zigma Y80 offers flexible charging via its solar panel for continuous operation or a power adapter for quick charging.
Powerful Cleaning Performance: The skimmer efficiently cleans floating debris, offering both high and low-speed settings for optimal results.
6L Large Capacity: The easily removable debris basket holds up to 6 liters of waste, simplifying the cleaning process.
5. Setup
5.1 Initial Charging
- Before first use, fully charge the Zigma Y80 using the provided power adapter. Connect the adapter to the charging port on the device and plug it into a standard electrical outlet.
- The charging indicator light will show the charging status. Allow approximately 5 hours for a full charge.
- Once fully charged, disconnect the power adapter.
5.2 Placement in the Pool
- Gently place the Zigma Y80 onto the surface of your pool. Ensure it floats freely and is not obstructed by pool edges or other objects.
- The device is designed to operate on the water surface. Do not attempt to submerge it.
6. Operating Instructions
6.1 Powering On/Off
- To turn on the device, press and hold the power button located on the top panel until the indicator lights illuminate.
- To turn off the device, press and hold the power button again until the indicator lights turn off.
6.2 Operating Modes
The Zigma Y80 features two cleaning speeds:
- High Speed: For quick and intensive cleaning, suitable for pools with a large amount of debris.
- Low Speed: For regular maintenance and lighter debris, offering longer operating times.
Press the mode selection button to switch between High and Low speed modes. The corresponding indicator light will confirm the selected mode.
6.3 Charging During Operation
The Zigma Y80 is equipped with a solar panel that allows it to charge while operating in direct sunlight. This extends the operational time and reduces the need for adapter charging. For faster or overnight charging, use the provided power adapter.
7. Maintenance
7.1 Emptying the Debris Basket
- Turn off the device and remove it from the pool.
- Locate the debris basket access point, typically on the top or side of the unit.
- Carefully remove the 6L capacity debris basket.
- Empty the collected debris into a waste bin.
- Rinse the basket with clean water to remove any remaining residue.
- Reinsert the clean debris basket securely into the unit.
7.2 Cleaning the Unit
- Periodically wipe down the exterior of the Zigma Y80 with a soft, damp cloth.
- Ensure the solar panel is clean and free of dirt or smudges to maximize charging efficiency.
- Do not use harsh chemicals or abrasive cleaners.
7.3 Battery Care and Storage
- For optimal battery life, avoid completely draining the battery frequently.
- When storing the device for extended periods, ensure it is fully charged and store it in a cool, dry place away from direct sunlight.
- Recharge the device every 3-6 months during storage to maintain battery health.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on | Low battery; Power button not pressed correctly | Charge the device fully; Press and hold the power button for 3 seconds. |
| Poor cleaning performance | Debris basket full; Impeller obstructed; Low battery | Empty and clean the debris basket; Check and clear any obstructions around the impeller; Charge the device. |
| Solar charging is slow or ineffective | Insufficient sunlight; Solar panel is dirty or obstructed | Ensure device is in direct sunlight; Clean the solar panel surface; Use adapter charging if sunlight is consistently low. |
| Device moves erratically or gets stuck | Obstructions in the pool; Water level too low/high | Remove large floating objects; Ensure pool water level is within recommended operating range. |
9. Specifications
| Feature | Specification |
|---|---|
| Model Name | Y80 |
| Brand | Zigma |
| Product Dimensions (L x W x H) | 44L x 32.9W x 19.9H centimetres |
| Power Source | Solar Powered, Adapter Charging |
| Debris Basket Capacity | 6 Liters |
| Color | Black |
| Assembly Required | No |
| GTIN / UPC | 602581350422 |
10. Warranty and Support
10.1 Warranty Information
The Zigma Y80 Robotic Pool Surface Skimmer comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including coverage period and limitations. Keep your proof of purchase for warranty claims.
10.2 Customer Support
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Zigma customer support:
- Website: www.zigma.com (Please check the official website for the most current contact information)
- Email: support@zigma.com