1. Introduction
Thank you for choosing the Mega Motion MM-7305-MN TRIO TENACITY Lift/Recliner Chair. This manual provides essential information for the safe and efficient use, setup, operation, and maintenance of your new chair. Please read these instructions thoroughly before using the product and retain them for future reference.
The MM-7305-MN is an extra-large, heavy-duty 3-position power lift and recliner chair designed for comfort and durability, featuring a 500-lb. weight capacity and a whisper-quiet power recline and lift function.
2. Safety Instructions
WARNING: Failure to follow these safety instructions could result in injury or damage to the product.
- Weight Capacity: Do not exceed the maximum weight capacity of 500 lbs (227 kg).
- Clearance: Ensure adequate clearance around the chair during operation to prevent obstruction or entanglement. Keep children and pets away from moving parts.
- Power Cord: Always inspect the power cord for damage before use. Do not operate the chair if the cord is frayed or damaged. Plug the chair directly into a wall outlet; avoid using extension cords.
- Stability: Do not stand on the footrest or armrests. Ensure the chair is placed on a level surface.
- Emergency Battery Backup: The integrated emergency battery backup is for temporary use during power outages to return the chair to a seated position. It is not intended for continuous operation.
- Medical Conditions: Consult a physician before using the lift function if you have any medical conditions that could be aggravated by movement or positioning.
3. Setup and Assembly
The Mega Motion MM-7305-MN chair requires minimal assembly. It is designed for straightforward setup.
- Unpacking: Carefully remove all components from the packaging. Retain packaging materials for potential future transport or returns.
- Placement: Position the chair on a level, stable surface. Ensure there is at least 18.5 inches (47 cm) of clearance from the wall to allow for full recline.
- Power Connection: Locate the power cord and plug it securely into a grounded electrical outlet.
- Remote Control: The remote control is pre-connected. Ensure its cable is not pinched or obstructed.
The chair features an exclusive two-motor lift design, synchronized to prevent tipping and capable of supporting up to 500 lbs. This design ensures smooth and stable operation during both lifting and reclining.
Image 1: The Mega Motion MM-7305-MN TRIO TENACITY Lift/Recliner Chair in its upright, seated position. The remote control is visible on the seat.
4. Operating Instructions
Your lift/recliner chair is operated using the wired remote control.
- Recline Function: Press and hold the DOWN arrow button on the remote to recline the chair. Release the button when you reach your desired comfort zone. The chair offers three distinct positions.
- Lift Function: Press and hold the UP arrow button on the remote to gently lift the chair, assisting you in standing up or exiting the chair. Release the button when the desired height is reached.
- USB Port: The remote control includes a USB port, allowing you to charge your tablet or phone conveniently from the comfort of your recliner.
- Side Pockets: Utilize the easy-to-reach side pockets on both sides of the chair to store magazines, newspapers, or the remote control.
Image 2: The Mega Motion MM-7305-MN TRIO TENACITY Lift/Recliner Chair fully reclined, illustrating the extended footrest and the robust steel lift mechanism.
Image 3: A detailed view of the remote control with its up and down arrow buttons, alongside the extended chaise pad construction of the footrest.
5. Maintenance
Proper care and maintenance will extend the life and performance of your chair.
- Fabric Care: The chair is upholstered in Darby Fabrics, 100% Polyester-W. For general cleaning, gently vacuum the fabric to remove dust and loose debris. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild, water-based cleaning solution and a soft cloth, testing on an inconspicuous area first. Do not saturate the fabric.
- Mechanism: The heavy-duty steel lift mechanism is designed for durability and typically requires no lubrication. Keep the mechanism free from dust and debris.
- Power Cord: Periodically inspect the power cord and connections for any signs of wear or damage.
- General Cleaning: Wipe down non-fabric surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
6. Troubleshooting
If you encounter issues with your chair, refer to the following common troubleshooting steps:
- Chair Not Responding:
- Ensure the power cord is securely plugged into a working electrical outlet.
- Check if the remote control cable is firmly connected to the chair and not damaged.
- Verify that the wall outlet is receiving power by testing it with another appliance. - Chair Moves Slowly or Unevenly:
- This could indicate a power issue. Ensure the chair is receiving adequate power.
- Check for any obstructions under or around the chair mechanism. - Emergency Battery Backup Not Working:
- Ensure the batteries (if replaceable) are correctly installed and not depleted. The emergency backup is for temporary use only. - Unusual Noises:
- Inspect the chair for any loose components or foreign objects that might be causing the noise. If the noise persists and seems to originate from the mechanism, discontinue use and contact support.
If these steps do not resolve the issue, please contact customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | MM-7305-MN TRIO TENACITY |
| Weight Capacity | 500 Lbs (227 kg) |
| Reclining Position Count | 3 |
| Suggested User Height | 5'8" To 6' (173 cm to 183 cm) |
| Material | Darby Fabrics, 100% Polyester-W |
| Frame Material | Furniture grade hardwood/plywood construction |
| Lift Mechanism | Heavy-duty steel, Exclusive Two Motor Lift design |
| Seat-To-Floor Height | 19.5" (49.5 cm) |
| Seat Depth | 22" (55.9 cm) |
| Seat Width | 27" (68.6 cm) |
| Total Width | 39.5" (100.3 cm) |
| Total Depth (Upright) | 39" (99.1 cm) |
| Total Recline Depth | 67" (170.2 cm) |
| Overall Lifted Chair Height | 62" (157.5 cm) |
| Distance From Wall | 18.5" (47 cm) |
| Included Components | Chair, Wired Remote Control |
| Required Assembly | No |
8. Warranty and Support
For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your purchase receipt as proof of purchase.
If you require assistance with troubleshooting or have questions not covered in this manual, please reach out to the manufacturer's customer service department or the seller from whom you purchased the chair.