Profile XPIOX3SYMO

GE Profile Opal 2.0 XL Nugget Ice Maker Instruction Manual

Model: XPIOX3SYMO | Brand: Profile

Introduction

Welcome to the world of chewable, crunchable nugget ice! Your GE Profile Opal 2.0 XL Nugget Ice Maker is designed to provide you with fresh, high-quality ice quickly and conveniently. This manual will guide you through the setup, operation, and maintenance of your new ice maker to ensure years of reliable performance.

GE Profile Opal 2.0 XL Nugget Ice Maker in Moonstone Blue

Figure 1: The GE Profile Opal 2.0 XL Nugget Ice Maker, showcasing its sleek design and ice bin.

Safety Information

Please read all safety instructions before operating the appliance to reduce the risk of fire, electric shock, or injury.

  • Always plug the ice maker into a grounded electrical outlet.
  • Do not immerse the appliance, power cord, or plug in water or other liquids.
  • Unplug the ice maker before cleaning or when not in use for extended periods.
  • Keep a minimum 4-inch clearance on all sides of the unit for proper ventilation.
  • Use only distilled water for optimal ice quality and to minimize mineral buildup.

What's in the Box

Upon unpacking, ensure all components are present and undamaged:

  • GE Profile Opal 2.0 XL Nugget Ice Maker Unit
  • Drip Tray
  • Ice Scoop
  • Opal Water Filter (1 included)
  • Citric Acid Descaling Powder (1 pack included)

Setup

  1. Unpack and Place: Carefully remove all packaging materials. Place the ice maker on a stable, level surface away from direct sunlight and heat sources. Ensure adequate ventilation around the unit.
  2. Dimensions of GE Profile Opal 2.0 XL Ice Maker

    Figure 2: Product dimensions for proper placement: 17.5"D x 13.43"W x 16.5"H.

  3. Install Water Tank: The XL model includes a 1-gallon side tank. Attach it securely to the side of the main unit.
  4. GE Profile Opal 2.0 XL Ice Maker with 1 Gallon Tank

    Figure 3: The 1-gallon side tank, providing extended water capacity.

  5. Fill Water Reservoir: Fill the main water reservoir and the side tank with distilled water.
  6. Plug In: Connect the power cord to a grounded electrical outlet.
  7. Initial Cleaning Cycle: Before first use, it is recommended to run a cleaning cycle. Refer to the 'Maintenance' section for detailed cleaning instructions.

Operating Instructions

  1. Power On: Press the 'Power' button on the control panel. The LED display will illuminate.
  2. Ice Production: The ice maker will automatically begin producing ice once powered on and water is detected. Your first batch of nugget ice can be ready in 10 minutes or less. The unit produces approximately 1.6 lbs of ice per hour, with a total daily capacity of 38 lbs.
  3. GE Profile Opal 2.0 XL Ice Maker producing ice quickly

    Figure 4: Rapid ice production, delivering fresh ice in minutes.

  4. SmartHQ App Connection: For enhanced control and monitoring, download the SmartHQ app.
    • Pair your ice maker with the app to monitor device status.
    • Schedule fresh ice production.
    • Receive automatic software updates.
    • Access voice control capabilities through Alexa and Google.
    SmartHQ App interface for scheduling ice production

    Figure 5: Schedule ice production and monitor status via the SmartHQ App.

  5. Ice Bin: The removable ice bin holds up to 3 lbs of ice. Use the included scoop to retrieve ice.
  6. Close-up of nugget ice in the GE Profile Opal 2.0 XL ice maker

    Figure 6: The chewable, crunchable nugget ice produced by your machine.

Maintenance

Regular cleaning and descaling are crucial for maintaining ice quality and appliance longevity.

  • Weekly Cleaning: Clean the ice maker once per week. This involves emptying the water, wiping down the interior, and cleaning the ice bin and drip tray.
  • Descaling: Descale the unit every 2-3 weeks, or more frequently if you live in a hard water area. Use the included citric acid descaling powder.
  • Opal Water Filter and Citric Acid Descaling Powder

    Figure 7: Included Opal Water Filter and Citric Acid Descaling Powder for maintenance.

    Map showing hard water areas in the US and descaling frequency recommendations

    Figure 8: Hard water can impact your ice maker. Descale monthly or more frequently in very hard water areas.

  • Filter Replacement: Replace the Opal Water Filter as needed, typically every 1-3 months depending on water usage and quality.

Troubleshooting

ProblemPossible CauseSolution
No ice productionNo water in reservoir; Unit not plugged in; Air vents obstructed.Fill water reservoir; Ensure power connection; Clear air vents.
Ice maker is noisyNormal operation sounds; Low water level; Unit needs descaling.Occasional noise is normal. Ensure water in reservoir. Perform descaling.
Ice has an off-tasteUnit needs cleaning/descaling; Non-distilled water used.Perform a thorough cleaning and descaling cycle. Use only distilled water.
Ice clumpingHigh humidity; Ice not being used frequently enough.Ensure proper ventilation. Use ice regularly or store excess in freezer.

Specifications

  • Model Name: XPIOX3SYMO
  • Product Dimensions: 17.5"D x 13.43"W x 16.5"H
  • Capacity: 3 Pounds (ice bin), 1 Gallon (water tank)
  • Ice Production: 38 lbs per day (1.6 lbs per hour)
  • Wattage: 300 watts
  • Voltage: 120 Volts
  • Material: Moonstone
  • Color: Moonstone Blue
  • Refrigerant: R600a

Warranty & Support

Your GE Profile Opal 2.0 XL Nugget Ice Maker comes with a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical support, replacement parts, or further assistance, please visit the official GE Appliances website or contact their customer service.

For more information, visit the GE Appliances Brand Store.

Related Documents - XPIOX3SYMO

Preview Profile OPAL 2.0 Ice Maker User Manual and Safety Guide
Comprehensive user manual for the Profile OPAL 2.0 Ice Maker, covering safety instructions, operation, cleaning, installation, troubleshooting, and product specifications. Learn how to make nugget ice with your Opal ice maker.
Preview Profile Mobiele Airco 9000BTU Handleiding
Ontdek de Profile Mobiele Airco 9000BTU met deze uitgebreide handleiding. Leer over installatie, bediening, onderhoud en veiligheidsvoorschriften voor optimale prestaties.
Preview Profile 633202511 Resin Cable Joint Kit Installation Guide
Installation instructions and details for the Profile 633202511 resin cable joint kit, designed for secure and waterproof cable connections. Includes multilingual guidance.
Preview Profile Dubbel Stopcontact met Timer & Spies Gebruiksaanwijzing
Gebruiksaanwijzing voor het Profile Dubbel Stopcontact met Timer & Spies (Ref. 418300100). Bevat technische specificaties, programmeerinstructies, gebruiksaanwijzing, garantievoorwaarden en conformiteitsverklaring.
Preview Profile Wall Detector User Manual
Comprehensive user manual for the Profile Wall Detector, detailing its functions, technical specifications, operation, maintenance, and safety precautions. Learn how to detect metal, wood, and live wires with this versatile tool.
Preview Profile Bladeless Fan User Manual - Model 545140200
Comprehensive user manual for the Profile Bladeless Fan (Model 545140200), covering features, safety instructions, operation, maintenance, troubleshooting, and technical specifications.