Mega Motion MM-5001-RKCH-A01 Trio Grande Single Motor 3 Position Lift/Recliner Chair User Manual

1. Introduction

This manual provides essential instructions for the safe and efficient operation, assembly, and maintenance of your Mega Motion MM-5001-RKCH-A01 Trio Grande Single Motor 3 Position Lift/Recliner Chair. Please read this manual thoroughly before using your chair and retain it for future reference.

2. Important Safety Information

Always observe the following safety precautions to prevent injury or damage to the chair.

• Do not allow children or pets to play on or around the chair, especially when it is in motion.
• Ensure the power cord is not pinched or damaged. Keep it away from heat sources and sharp objects.
• Do not place hands or feet under the chair mechanism while operating.
• Do not exceed the maximum weight capacity of 375 lbs.
• Always ensure the chair is placed on a level surface.
• Unplug the chair from the power outlet before cleaning or performing any maintenance.
• If the chair malfunctions, discontinue use immediately and contact customer support.

3. Package Contents

Verify that all components are present before assembly:

• Recliner Base
• Backrest
• Handwand Remote Control
• Power Supply Cord
• Emergency Battery Backup (if separate)
• User Manual (this document)

4. Setup and Assembly

Follow these steps to assemble your lift/recliner chair:

1. Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface to prevent damage.
2. Attach Backrest: Align the metal receivers on the backrest with the posts on the chair base. Slide the backrest down firmly until it locks into place. You should hear a click.
3. Connect Power: Locate the power cord from the chair and connect it to the power supply. Plug the power supply into a standard wall outlet.
4. Connect Handwand: Plug the handwand remote control cable into the designated port on the side of the chair or power supply.
5. Emergency Battery Backup: If your model includes a separate battery backup, install two 9V batteries (not included) into the battery compartment located on the power supply or chair mechanism. This provides temporary power during an outage.
6. Position Chair: Place the chair in its desired location, ensuring there is at least 18 inches of clearance from the wall to allow for full recline.

5. Operating Instructions

Your chair is operated using the handwand remote control.

5.1 Handwand Remote Control

• Recline/Lower: Press and hold the down arrow button to recline the chair back and raise the footrest. Continue holding to achieve your desired recline position.
• Lift/Raise: Press and hold the up arrow button to bring the chair to an upright position or to initiate the lift function, gently tilting the chair forward to assist in standing.
• Release the button at any point to stop the chair's movement.

5.2 USB Charging Port

A USB port is integrated into the handwand for convenient charging of your mobile devices. Simply plug your device's USB cable into the port.

5.3 Emergency Battery Backup

In the event of a power outage, the emergency battery backup (requires two 9V batteries, not included) provides temporary power to return the chair to an upright position. This feature is for emergency use only and is not intended for continuous operation.

6. Key Features

• Whisper Quiet Power Recline and Lift: Smooth and quiet operation for reclining or assisting with standing.
• USB Port in Handwand: Convenient charging for electronic devices.
• Superior Soft Feel Fabric: Breathable Kaysen fabric for enhanced comfort.
• Easy-to-Reach Side Pockets: Located on both sides for storing magazines, remote controls, or other small items.
• Chaise Pad Construction: Provides head-to-toe comfort and support.
• Durable Construction: Furniture-grade hardwood/plywood frame and heavy-duty steel lift mechanism.
• Integrated Emergency Battery Backup: Allows for temporary operation during power outages.

7. Maintenance and Care

Proper care will extend the life and appearance of your chair.

• Cleaning Fabric: For general cleaning, use a soft cloth dampened with mild soap and water. Test on an inconspicuous area first. Do not use harsh chemicals or abrasive cleaners.
• Vacuuming: Regularly vacuum the chair using a soft brush attachment to remove dust and debris.
• Spills: Blot spills immediately with a clean, dry cloth. Do not rub.
• Mechanism: The lift mechanism is designed to be maintenance-free. Do not lubricate or attempt to repair it yourself.
• Power Cord: Periodically inspect the power cord for any signs of damage.

8. Troubleshooting

If you encounter issues with your chair, refer to the following common problems and solutions:

If troubleshooting steps do not resolve the issue, please contact customer support.

9. Specifications

10. Warranty Information

Specific warranty details for the Mega Motion MM-5001-RKCH-A01 Trio Grande Lift/Recliner Chair are typically provided at the point of purchase or included with the product packaging. Please refer to your purchase documentation or contact the retailer or manufacturer directly for comprehensive warranty terms and conditions.

11. Customer Support

For further assistance, parts, or service inquiries regarding your Mega Motion lift/recliner chair, please contact the retailer from whom you purchased the product. You may also visit the official Mega Motion website for additional support resources.