1. Introduction
The IPG ProActive screen protector is designed to provide robust protection for your Alpine iLX-F905D / iLX-F509 Halo9 9 Inch Multimedia Receiver Display. This advanced film offers 9H hardness, anti-scratch, smudge, and shock-proof nano technology, safeguarding your device from daily wear and potential damage without adding bulk. It maintains the original sleek design and ensures a smooth, ultra-responsive touch experience with high clarity.
Image 1.1: IPG ProActive screen protector packaging and protector applied to an Alpine multimedia receiver, highlighting its design and intended use.
Image 1.2: An exploded view diagram detailing the layers of the IPG ProActive screen protector, including anti-fingerprint, hydraulic, impact resistant, HD glass, and adhesive layers.
2. What's in the Box
Your IPG ProActive screen protector package includes the following items:
- IPG ProActive Pre-Cut Film
- Guide and Handle Sticker / Dust-Remover Sticker for Installation
- Installation & Guarantee Card
- Microfiber Cloth
3. Setup and Installation
The IPG ProActive screen protector is designed for dry application. Follow these steps carefully for optimal results:
- Clean the Surface: Use the provided microfiber cloth to thoroughly clean the display surface of your Alpine multimedia receiver. Ensure there is no dust, fingerprints, or smudges. You may use the dust-remover sticker for any remaining particles.
- Peel from Backing: Carefully peel the IPG ProActive film from its backing liner. Avoid touching the adhesive side.
- Align to Device: Align the screen protector precisely with the edges and cutouts of your device's display. Use the guide and handle stickers if provided to assist with alignment.
- Apply and Smooth: Gently lay the film onto the display. Use the IPG installation card (squeegee) to smooth out any air bubbles, pushing them towards the edges of the screen.
- Peel Front Protective Film: Once the protector is applied and smoothed, carefully peel off the front protective film (if present).
- Final Wipe: Use the microfiber cloth to wipe off the IPG ProActive screen protector, ensuring a clean and clear finish.
Image 3.1: This graphic illustrates six clear steps for installing the IPG ProActive screen protector, from cleaning the surface to removing protective films and addressing bubbles.
Image 3.2: The screen protector is shown applied to the Alpine multimedia receiver, demonstrating its precise fit and transparent quality over the display interface.
4. Operating
Once installed, the IPG ProActive screen protector provides a smooth, glass-like touch experience, maintaining the ultra-responsiveness and high clarity of your Alpine display. It is virtually invisible and designed not to interfere with the display's functionality, ensuring your multimedia receiver operates as intended.
Image 4.1: A visual representation of the screen protector's high clarity, overlaid on a mountain landscape, indicating minimal visual distortion.
5. Maintenance
To ensure the longevity and clarity of your IPG ProActive screen protector, follow these maintenance guidelines:
- Cleaning: Use the provided microfiber cloth to gently wipe the surface of the screen protector. This will effectively remove dust, fingerprints, and smudges due to its anti-smudge properties.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals on the screen protector, as these can damage the film and affect its clarity.
- Gentle Handling: While the film is durable, avoid sharp objects or excessive force that could potentially scratch or puncture the surface.
6. Troubleshooting
If you encounter any issues during or after installation, refer to the following common solutions:
- Bubbles After Installation: If small bubbles remain after initial application, use the IPG installation card to gently push them towards the nearest edge. For persistent bubbles, carefully lift the edge of the film closest to the bubble and reapply, ensuring no dust particles are trapped underneath.
- Dust Under Film: If dust particles are trapped, carefully lift the film and use the dust-remover sticker to pick up the particles from both the screen and the adhesive side of the film before reapplying.
- Residue Upon Removal: The IPG ProActive film is designed to leave no adhesive residue when removed during replacement, ensuring your device's screen remains clean.
Image 6.1: A hand holds the IPG ProActive screen protector, showcasing its flexibility and resilience, emphasizing it is 'Much Better than Tempered Glass'.
7. Specifications
| Feature | Detail |
|---|---|
| Compatible Devices | Alpine iLX-F905D / iLX-F509 Halo9 9 Inch Multimedia Receiver Display |
| Material | Thermoplastic Polyurethane |
| Item Hardness | 9H |
| Product Dimensions | 10"L x 5"W |
| Color | Clear |
| Special Features | 9H Surface Hardness, Anti-Fingerprint, Drop Resistant, Scratch Resistant, Smudge Resistant |
8. Warranty and Support
IPG ProActive offers a free lifetime replacement warranty for the life of your Alpine iLX-F905D / iLX-F509 Halo9 9 Inch Multimedia Receiver Display Screen Protector. For warranty claims or further support, please refer to the contact information provided on your Installation & Guarantee Card or visit the official IPG website.
