VICHTOP Rechargeable Submersible LED Pool Lights

1. Product Overview

The VICHTOP Submersible LED Pool Lights are designed to illuminate and enhance the ambiance of various water features and outdoor spaces. These lights feature 13 high-quality LED beads, offering 16 static color modes, 3 dynamic color-changing modes (fade, smooth, flash), and 4 brightness levels. Equipped with a built-in rechargeable lithium polymer battery, they provide extended operation and are controlled via an included remote. Their IP68 waterproof rating and strong adhesive ensure reliable performance in aquatic environments.

Image: Two VICHTOP submersible LED pool lights, a remote control, and a USB charging cable. The lights are round with multiple LED elements, and the remote shows various color and mode buttons.

2. Package Contents

• 2 x VICHTOP Submersible LED Pool Lights
• 1 x Remote Control
• 1 x USB Charging Cable (double-ended)
• 2 x Adhesive Pads (pre-applied or separate, for mounting)
• 1 x User Manual (this document)

3. Specifications

4. Safety Information

• Do not attempt to open or modify the light unit. This will void the warranty and may compromise its waterproof integrity.
• Ensure the charging port is completely dry before connecting the USB cable. Water ingress during charging can cause damage.
• Keep the remote control dry.
• Do not expose the lights to extreme temperatures outside of normal operating conditions.
• Keep out of reach of small children.
• Dispose of batteries and electronic components responsibly according to local regulations.

5. Setup

5.1 Charging the Lights

1. Locate the charging port on the side of each light unit.
2. Connect the provided double-ended USB charging cable to the light(s) and a standard USB power adapter (not included).
3. The indicator light on the unit will show charging status (e.g., red for charging, green for fully charged).
4. Allow approximately 2.5 hours for a full charge. Disconnect the cable once charging is complete.

Image: Two pool lights connected to a wall charger via a double-ended USB cable, demonstrating how to charge the units simultaneously.

5.2 Installation

The lights come with strong underwater adhesive for secure mounting.

1. Pick suitable place and wipe off the dirt: Choose a clean, smooth, and dry surface for installation. Ensure the area is free from dirt, dust, or debris.
2. Apply proper glue on the holder: Apply a sufficient amount of the provided strong underwater glue to the back of the light's holder.
3. Firmly press and hold the holder for more than 1 minute: Press the holder firmly against the chosen surface for at least one minute to ensure proper adhesion.
4. After an hour, put on the light (make sure you have powered on the light): Allow the adhesive to cure for at least one hour before attaching the light unit. Ensure the light is powered on before placing it.
5. Choose your favorite mode by Remote: Once installed, use the remote control to select your desired color and mode.

Image: A visual guide demonstrating the five steps for installing the pool lights using the provided adhesive, from cleaning the surface to selecting a mode with the remote.

6. Operating Instructions

6.1 Remote Control Functions

The included remote control allows for full customization of the light settings. Ensure the remote is pointed towards the lights for optimal signal reception, especially when submerged.

• ON/OFF: Press to turn the lights on or off.
• Brightness +/-: Adjust the light intensity (4 levels available).
• Color Selection: Choose from 16 static colors using the color buttons.
• Dynamic Modes:
  • FLASH: Rapidly cycles through colors.
  • FADE: Smoothly transitions between colors.
  • SMOOTH: Gradual color changes.
• Timer Modes (2H/4H/6H): Set the lights to automatically turn off after 2, 4, or 6 hours.

Image: A detailed diagram of the remote control, highlighting its various buttons and their corresponding functions for controlling the pool lights' colors, modes, brightness, and timers.

Image: An infographic illustrating the wide range of customization options available, including 16 solid colors, 4 brightness levels, 3 dynamic lighting modes, and 3 timer settings.

Image: A swimming pool at dusk, brightly lit by several submersible LED lights, showcasing their ability to fill the pool with dynamic colors.

Image: A collage demonstrating the versatility of the lights, showing them used in fountains, along courtyard paths, within swimming pools, and as party decorations.

7. Maintenance

• Cleaning: Periodically clean the surface of the lights with a soft cloth to remove any mineral deposits or debris that may accumulate, especially if used in chlorinated water. Do not use abrasive cleaners.
• Recharging: Recharge the lights when the brightness diminishes or before prolonged storage. Fully charging them before storage can help maintain battery health.
• Storage: If storing the lights for an extended period, ensure they are fully charged and stored in a cool, dry place away from direct sunlight.
• Adhesive Check: Regularly inspect the adhesive bond to ensure the lights remain securely attached. Reapply adhesive if necessary.

8. Troubleshooting

9. Warranty and Support

VICHTOP products are manufactured with quality and performance in mind. For any product-related inquiries, technical support, or warranty claims, please contact VICHTOP customer service through the platform where you purchased the product. Please have your order number and product model information ready when contacting support.

For more information, visit the official VICHTOP brand page or contact your retailer.