1. Product Overview
The AIPER Cordless Robotic Pool Cleaner is designed for efficient and convenient cleaning of above-ground flat pools up to 40 feet. This automated device features powerful suction and self-parking technology, ensuring thorough debris collection and ease of use.
Image: The AIPER Cordless Robotic Pool Cleaner, showcasing its compact design and integrated handle.
2. Setup
2.1 Unboxing and Component Check
Carefully remove all components from the packaging. Verify that all listed items are present and undamaged.
Image: The product box displaying the Aiper Seagull SE cleaner, power adapter, retrieval hook, user manual, brushes, and spare wheels.
- Aiper Seagull SE Robotic Pool Cleaner
- Power Adapter
- Retrieval Hook
- User Manual
- Brushes (2)
- Spare Wheels (2)
2.2 Initial Charging
Before first use, fully charge the robotic pool cleaner. The charging time is approximately 2.5 hours.
Image: The robotic pool cleaner connected to its power adapter, indicating it is charging.
- Connect the power adapter to the charging port on the cleaner.
- Plug the adapter into a standard electrical outlet.
- The indicator light will show charging status (refer to the manual for specific light indications).
- Once fully charged, disconnect the cleaner from the power adapter.
2.3 Brush Installation (if not pre-installed)
The cleaner comes with brushes that aid in scrubbing the pool surface. If not already installed, attach them to the designated slots on the underside of the unit. Ensure they are securely fastened.
3. Operating Instructions
3.1 Placing the Cleaner in the Pool
With a simple one-button control, the cleaner is user-friendly and hassle-free to operate.
Image: The robotic pool cleaner submerged in a pool, ready for operation.
- Ensure the cleaner is fully charged.
- Press the power button located on the top of the unit.
- Gently submerge the cleaner into the pool. It will begin its cleaning cycle automatically.
3.2 Self-Parking Technology
The AIPER cleaner is equipped with self-parking technology. When the battery is low or the cleaning cycle is complete, the cleaner will automatically move to the edge of the pool for easy retrieval.
Image: Two robotic pool cleaners in a pool, illustrating the self-parking feature as they move towards the edge.
3.3 Retrieving the Cleaner
Use the included retrieval hook to safely pull the cleaner out of the water.
Image: The robotic pool cleaner being lifted from the pool using the provided retrieval hook.
4. Maintenance
4.1 Cleaning the Filter Basket
The cleaner is equipped with large-capacity filter bags or canisters that capture dirt, debris, and contaminants. Regular cleaning of the filter is crucial for optimal performance.
Image: Hands rinsing the filter basket of the pool cleaner with a hose.
- After each cleaning cycle, remove the cleaner from the pool.
- Locate the release latches (usually at the front and back) to open the cleaner's body.
- Carefully lift out the filter basket.
- Empty any collected debris and rinse the filter thoroughly with a hose until clean.
- Ensure the filter is completely dry before reinserting it into the cleaner.
- Close the cleaner's body, ensuring all latches snap securely into place.
4.2 General Cleaning and Storage
- Wipe down the exterior of the cleaner with a soft, damp cloth.
- Store the cleaner in a cool, dry place away from direct sunlight and extreme temperatures.
- Ensure the battery is charged before long-term storage to maintain battery health.
5. Troubleshooting
If you encounter issues with your AIPER Robotic Pool Cleaner, please refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Cleaner does not turn on. | Low battery or power button not pressed correctly. | Ensure the unit is fully charged. Press the power button firmly. |
| Poor cleaning performance. | Clogged filter basket or brushes worn. | Clean the filter basket. Check and replace brushes if necessary. |
| Cleaner gets stuck. | Obstruction in the pool or pool size/shape not ideal. | Remove any large debris from the pool. Ensure pool type is suitable for the cleaner (above-ground, flat). |
| Cleaner does not self-park. | Battery completely depleted or sensor issue. | Ensure the cleaner is charged. If problem persists, contact customer support. |
For further assistance, please contact AIPER customer support.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | AIPER |
| Model Name | ZT2002-cr |
| Product Dimensions | 13.4"L x 13.2"W x 6.8"H |
| Item Weight | 7.5 Pounds |
| Power Source | AC (for charging) |
| Special Feature | Cordless, Rechargeable |
| Control Method | Touch |
| Battery Type | Lithium-Ion (1 included) |
| Charging Time | 2.5 Hours |
| Efficiency | High efficiency, Powerful Suction, Large Debris Chamber |
| Installation Type | Robotic |
7. Warranty and Support
This (Renewed) AIPER Cordless Robotic Pool Cleaner is backed by an Aiper 180-day warranty for your peace of mind. This device has been fully tested and cleaned to ensure functionality, though it may have minor cosmetic imperfections.
For warranty claims, technical support, or any inquiries, please contact AIPER customer service through their official channels or the retailer where the product was purchased.
