BENGOO TA86 Wireless Gaming Headset User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your BENGOO TA86 Wireless Gaming Headset. Please read this manual thoroughly before using the product to ensure proper functionality and to maximize your gaming experience.

2. Package Contents

Verify that all items are present in your package:

• BENGOO TA86 Headset
• USB-C Charging Cable
• 3.5mm Audio Cable
• Detachable Microphone
• 2.4GHz USB Dongle
• User Manual (this document)

Image: The BENGOO TA86 headset shown with its 2.4GHz USB dongle, 3.5mm audio cable, and USB-C charging cable.

3. Product Overview

3.1 Headset Components

Familiarize yourself with the various parts and controls of your BENGOO TA86 headset:

Image: A diagram illustrating the headset's components, including the power button, mic switch/light button, volume controls, Type-C charging port, 3.5mm audio port, and detachable microphone.

• Power Button: Used to power the headset on or off.
• Mic Switch / Light Button: Controls microphone mute/unmute and RGB lighting effects.
• Volume +/-: Adjusts the audio output volume.
• Type-C Port: For charging the headset.
• 3.5mm Audio Port: For wired connection to compatible devices.
• Detachable Microphone Port: Connects the included microphone.
• 2.4GHz/Bluetooth Modes Switch: Toggles between 2.4GHz wireless and Bluetooth modes.

3.2 Key Features

• 3-in-1 Connection Modes: Supports 2.4GHz wireless, Bluetooth 5.3, and 3.5mm wired connections for broad device compatibility.
• Transparent Crystal Shell with RGB Lights: Features a unique transparent design with customizable RGB lighting effects.
• Long Battery Life: Up to 100 hours of playtime without lights, or 25-30 hours with RGB lighting enabled, thanks to a 1500mAh battery.
• Low Latency: Provides a stable wireless connection with less than 10ms latency for synchronized audio and video.
• 50mm Driver Units: Delivers immersive 3D surround sound with enhanced acoustic positioning.
• Noise-Isolating Microphone: Omnidirectional microphone with noise-canceling features for clear communication.

4. Setup and Connection

The BENGOO TA86 headset offers three connection methods:

4.1 2.4GHz Wireless Connection (PC, PS4, PS5, Laptop)

1. Insert the 2.4GHz USB dongle into an available USB port on your PC, PS4, PS5, or laptop.
2. Power on the headset by pressing and holding the Power Button.
3. Ensure the headset is in 2.4GHz mode (indicated by a green light on the dongle). If not, press and hold the 'M' button (Mode Switch) on the headset for 3 seconds to switch modes until the green light appears.
4. The headset should automatically connect to the dongle. You may need to select the headset as the default audio input/output device in your system settings.

Image: A close-up of the 2.4GHz USB dongle, highlighting its low latency wireless capability.

4.2 Bluetooth 5.3 Connection (Mac, Switch, Mobile Devices)

Note: Bluetooth function does not support PS4 or PS5 directly.

1. Power on the headset by pressing and holding the Power Button.
2. Press and hold the 'M' button (Mode Switch) on the headset for 3 seconds to switch to Bluetooth mode (indicated by a blue light).
3. On your Mac, Switch, or mobile device, navigate to the Bluetooth settings and enable Bluetooth.
4. Search for available devices and select "BENGOO TA86" to pair.
5. Once paired, the headset will connect, and you can use it for audio.

4.3 3.5mm Wired Connection (Xbox One, Xbox Series, other 3.5mm devices)

Note: In 3.5mm wired mode, only headset sound and microphone function. RGB light effects and mic mute function are inactive.

1. Connect one end of the included 3.5mm audio cable to the 3.5mm audio port on the headset.
2. Connect the other end of the 3.5mm audio cable to the 3.5mm port on your Xbox controller or other compatible device.
3. The headset will function as a wired audio device.

Image: A visual representation of the three connection modes: 2.4GHz USB dongle, Bluetooth, and 3.5mm cable, along with their compatible devices.

5. Operating Instructions

5.1 Power On/Off

• To Power On: Press and hold the Power Button for approximately 3 seconds until the indicator light illuminates.
• To Power Off: Press and hold the Power Button for approximately 3 seconds until the indicator light turns off.

5.2 RGB Lighting Control

The BENGOO TA86 features dynamic RGB lighting effects:

• Change Light Effect: Double-click the Mic Button to cycle through different RGB lighting modes.
• Turn Lights Off: Press and hold the Mic Button for 3 seconds to turn off the RGB lights.

Image: The BENGOO TA86 headset displaying multiple RGB light patterns, including breathing, solid, flash, gradient, and flowing effects.

5.3 Microphone Usage

The headset includes a detachable, noise-isolating microphone:

• Attach Microphone: Insert the detachable microphone into the dedicated port on the headset.
• Adjust Angle: The flexible mic design allows for convenient adjustment of the microphone angle for optimal voice capture.
• Mute/Unmute: Press the Mic Button once to mute or unmute the microphone. (Note: Mic mute function is inactive in 3.5mm wired mode).

Image: A detailed view of the detachable microphone, highlighting its noise isolation capabilities for clear audio transmission.

5.4 Volume Control

Use the Volume +/- buttons on the headset to adjust the audio output level to your preference.

6. Charging

To charge your BENGOO TA86 headset:

1. Connect the USB-C charging cable to the Type-C port on the headset.
2. Connect the other end of the charging cable to a USB power source (e.g., computer USB port, USB wall adapter).
3. A full charge typically takes approximately 3 hours.

The 1500mAh battery provides:

• Over 100 hours of gaming time without RGB lights.
• 25-30 hours of gaming time with RGB lights enabled.

Image: An illustration detailing the 1500mAh battery capacity, USB-C charging time, and estimated gaming hours with and without RGB lighting.

7. Compatibility

The BENGOO TA86 Wireless Gaming Headset is compatible with a wide range of devices:

• 2.4GHz Wireless: PC, PS4, PS5, Laptops.
• Bluetooth 5.3: Mac, Nintendo Switch, Mobile devices (phones, tablets).
• 3.5mm Wired: Xbox One, Xbox Series X|S, and any device with a 3.5mm audio jack.

8. Troubleshooting

If you encounter issues with your headset, refer to the following common solutions:

• No Sound/Microphone Not Working:
  • Ensure the headset is powered on and fully charged.
  • Verify the correct connection mode (2.4GHz, Bluetooth, or 3.5mm wired) is selected for your device.
  • Check system audio settings on your device to ensure the headset is selected as the default input/output device.
  • For wired mode, confirm the 3.5mm cable is fully inserted. Remember RGB lights and mic mute are inactive in wired mode.
  • Ensure the microphone is properly attached and not muted.
• Bluetooth Connection Issues with PS4/PS5:
  • The Bluetooth function does not directly support PS4 or PS5. Use the 2.4GHz USB dongle for wireless connection with these consoles.
• RGB Lights Not Working in Wired Mode:
  • This is normal. RGB lighting is only active in wireless modes.
• Low Latency Issues:
  • Ensure you are using the 2.4GHz wireless connection for the lowest latency experience, especially for gaming.
  • Reduce interference by moving closer to the 2.4GHz USB dongle.
• Headset Not Charging:
  • Verify the USB-C cable is securely connected to both the headset and the power source.
  • Try a different USB-C cable or power adapter.

9. Specifications

10. Maintenance

To ensure the longevity and optimal performance of your headset:

• Clean the headset regularly with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
• Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
• Avoid exposing the headset to water or excessive moisture.
• Handle the detachable microphone and cables with care to prevent damage.

11. Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official BENGOO website. Keep your proof of purchase for warranty claims.