1. Introduction
Thank you for choosing the Fanttik E2 Ultra Mini Electric Screwdriver. This precision tool is engineered for delicate repair tasks on various electronic devices and small appliances. With its powerful motor, adjustable torque settings, and comprehensive bit set, the E2 Ultra provides efficient and precise control for both professionals and DIY enthusiasts. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting.
2. Safety Information
Please read all safety warnings and instructions carefully before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
- Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
- Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
- Avoid unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the tool.
- Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
- Use personal protective equipment. Always wear eye protection.
- Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
- Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use.
- Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
- Do not expose the battery to fire or excessive heat.
- Only use the provided USB-C cable for charging.
3. Package Contents
Verify that all items listed below are included in your package. If any items are missing or damaged, please contact customer support.
- Electric Precision Screwdriver (NEX E2 Ultra)
- Magnetic Storage Box (RevoStor)
- 50x Screwdriver Bits (S2 Steel, 5/32'' Hex)
- Tweezers
- Pry Bar
- USB-C Cable
- User Manual
- Aluminium Alloy Case
Image: All components included in the Fanttik E2 Ultra package.
Image: The comprehensive 50-piece S2 steel screwdriver bit set, including long bits, pry bar, and tweezers.
Video: An unboxing video demonstrating the contents of the Fanttik E2 Ultra package.
4. Product Overview
The Fanttik E2 Ultra is a compact and powerful electric screwdriver designed for precision work. Its key features include:
- Electric Screwdriver: Ergonomic design with a gradient indicator bar for torque and status, and an integrated LED light for illumination.
- RevoStor Magnetic Storage System: A unique pop-up mechanism and rotary storage bin keep the 50 magnetic bits organized and easily accessible.
- Adjustable Torque: 5 gear torque settings (0.05/0.1/0.2/0.4/0.6 N.m) for precise control, plus a manual mode with up to 3 N.m torque.
- High-Speed Motor: Operates at 270 RPM for efficient fastening and loosening.
- Long-lasting Battery: 800mAh rechargeable battery with Type-C charging for extended use.
Image: The Fanttik E2 Ultra electric screwdriver alongside its cylindrical storage case and the internal bit organizer.
Image: A detailed view of the RevoStor storage system, highlighting its rotating bit organization and the pop-up mechanism for easy access.
5. Setup
5.1 Charging the Screwdriver
Before first use, fully charge the screwdriver. The gradient indicator bar will show charging status.
- Locate the USB-C charging port at the bottom of the screwdriver.
- Connect the provided USB-C cable to the screwdriver and a compatible USB power source (e.g., computer, wall adapter).
- The gradient indicator bar will illuminate to show charging progress. It will indicate a full charge when complete.
Image: The Fanttik E2 Ultra screwdriver connected to a USB-C charging cable, showing the charging indicator.
Image: A close-up view of the Type-C charging port on the Fanttik E2 Ultra, indicating its charging capability.
5.2 Installing Screwdriver Bits
The RevoStor system makes bit selection and installation simple.
- To access the bits, press the top of the RevoStor case to activate the pop-up mechanism.
- Rotate the storage bin to find the desired bit.
- Select the appropriate 5/32'' hex bit for your task.
- Insert the chosen bit firmly into the magnetic chuck of the electric screwdriver until it clicks into place.
- To remove, simply pull the bit out.
Image: A demonstration of how to magnetize a screwdriver bit using the designated area on the storage case.
6. Operating Instructions
6.1 Powering On and Off
The screwdriver is activated by pressing the directional buttons.
6.2 Adjusting Torque Settings
The Fanttik E2 Ultra offers 5 adjustable torque settings for various applications:
- 0.05 N.m
- 0.1 N.m
- 0.2 N.m
- 0.4 N.m
- 0.6 N.m (Max Electric Torque)
The gradient indicator bar visually represents the selected torque gear. For tasks requiring more force, the screwdriver also supports a manual mode with up to 3 N.m torque.
Image: The electric screwdriver being used on a speaker, demonstrating its powerful torque capabilities and adjustable settings.
6.3 Using the Screwdriver
To operate the screwdriver:
- Select the appropriate bit and install it firmly.
- Adjust the torque setting as needed for your task.
- Press the upper button to screw in (clockwise) or the lower button to screw out (counter-clockwise). The integrated LED light will illuminate the work area.
- Apply gentle pressure and allow the screwdriver to do the work. Avoid excessive force, especially on delicate components.
Image: The Fanttik E2 Ultra screwdriver in action on a circuit board, demonstrating its speedy precision for intricate tasks.
6.4 Applications
The Fanttik E2 Ultra is ideal for a wide range of precision applications, including but not limited to:
- Mobile Phones
- Laptops and Computers
- Cameras
- Watches
- Game Consoles
- Drones
- Small Appliances
- RC Cars
Image: A collage showing the Fanttik E2 Ultra being used for repairs on various electronic devices such as keyboards, cameras, racing cars, game consoles, mice, and computers.
7. Maintenance
7.1 Cleaning
Regular cleaning helps maintain the performance and longevity of your screwdriver.
- Wipe the screwdriver body with a soft, dry cloth.
- Ensure no dust or debris accumulates in the bit chuck or charging port.
- Clean the bits periodically to remove any residue that might affect their grip or magnetic properties.
7.2 Storage
Store the screwdriver and bits properly to prevent damage and loss.
- Always return bits to the RevoStor magnetic storage case after use.
- Store the entire kit in a cool, dry place, away from direct sunlight and extreme temperatures.
- Keep out of reach of children.
Image: A hand demonstrating the rotation of the RevoStor magnetic storage bin, showcasing its organized bit storage.
8. Troubleshooting
If you encounter issues with your Fanttik E2 Ultra, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Screwdriver does not turn on. | Battery is depleted. | Charge the screwdriver fully using the provided USB-C cable. |
| Screwdriver lacks power/torque. | Low battery or incorrect torque setting. | Recharge the battery. Adjust to a higher torque setting if needed. |
| Bit slips or does not grip screw. | Incorrect bit size or worn bit. | Ensure you are using the correct bit for the screw head. Replace worn bits if necessary. |
| Bits are not magnetic. | Bits need re-magnetization. | Use the magnetization area on the storage case to re-magnetize the bits. |
If the problem persists after attempting these solutions, please contact Fanttik customer support for further assistance.
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Fanttik |
| Model Name | NEX E2 Ultra |
| Voltage | 3.7 Volts |
| Battery Capacity | 800mAh (Lithium Ion) |
| Max Electric Torque | 0.6 N.m |
| Manual Torque | Max. 3 N.m |
| Motor Speed | 270 RPM |
| Torque Adjustment | 5 settings (0.05/0.1/0.2/0.4/0.6 N.m) |
| Bit Type | 5/32'' Hex |
| Bit Material | S2 Steel |
| Dimensions (L x W x H) | 7.95 x 2.96 x 2.96 inches |
| Item Weight | 1.47 pounds |
| Special Features | LED Light, Gradient Indicator Bar, Pop-Up Mechanism, RevoStor Magnetic Storage |
| Material | Anodized Aluminum Housing, Plastic Bits Storage |
10. Warranty and Support
Fanttik products are manufactured to high-quality standards and are warranted against defects in materials and workmanship. For specific warranty details, including duration and coverage, please refer to the warranty card included with your product or visit the official Fanttik website.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Fanttik customer service:
- Website: www.fanttik.com
- Email: Refer to your product packaging or website for contact email.
When contacting support, please have your product model (NEX E2 Ultra) and purchase information ready.
