Hyper Tough 300-LUMEN Rechargeable LED Work Light

Introduction

The Hyper Tough 300-LUMEN Rechargeable LED Work Light is a versatile and durable lighting tool designed for various tasks. Featuring a 90-degree rotating head, a strong magnetic base, and a metal pocket clip, it offers hands-free illumination in multiple scenarios. With six distinct lighting modes and a long-lasting rechargeable lithium-ion battery, this work light is an essential addition to any toolkit.

Safety Information

Please read all safety warnings and instructions before using this product.

• WARNING: This light projects a very bright beam of light. For eye protection, do not look directly into the light.
• BURN HAZARD: Battery liquid may be flammable if exposed to spark or flame.
• FIRE HAZARD: Never attempt to open the battery pack for any reason.
• Do not expose the light to extreme temperatures or direct sunlight.
• Keep out of reach of children.
• This product is Not Water Resistant. Avoid exposure to water or high humidity.

Product Features

• 300-LUMEN Output: Provides bright illumination for various tasks.
• 90° Rotating Head: Allows for adjustable light direction.
• Six Lighting Modes: HIGH, LOW, AREA HIGH, AREA LOW, RED, and RED FLASH for diverse lighting needs.
• Magnetic Base: Strong magnet for secure attachment to metal surfaces, enabling hands-free use.
• 1800 mAh Rechargeable Lithium-Ion Battery: Long-lasting power with convenient recharging.
• USB-C Charging: Includes a 0.5m USB-C cable for easy charging.
• Metal Pocket Clip: For hands-free right-angle lighting or easy carrying.
• Durable Aluminum Housing: Ensures longevity and resilience.

Package Contents

Please check the package to ensure all items are present:

• 1 x Hyper Tough 300-LUMEN Rechargeable LED Work Light
• 1 x 0.5m USB-C Charging Cable

Image: The Hyper Tough 300-LUMEN Rechargeable LED Work Light shown alongside its included USB-C charging cable.

Setup

Initial Charging

Before first use, it is recommended to fully charge the work light. The light is equipped with an 1800mAh lithium-ion battery.

1. Locate the hidden USB-C charging port on the side of the light. It is typically covered by a rubber flap for protection.
2. Gently open the rubber flap to expose the USB-C port.
3. Insert the small end of the included 0.5m USB-C cable into the light's charging port.
4. Connect the larger USB-A end of the cable to a compatible USB power source (e.g., wall adapter, computer USB port, power bank).
5. The charging indicator light (if present) will illuminate to show charging status. Charge until the indicator shows a full charge (refer to product for specific indicator behavior).
6. Once fully charged, disconnect the cable and securely close the rubber flap to protect the port from dust and moisture.

Image: Side view of the work light, highlighting the location of the USB-C charging port.

Operating Instructions

Power On/Off and Mode Selection

The work light features a single power switch to control its functions.

1. To Turn On: Press the power switch once. The light will typically turn on in the first mode (HIGH).
2. To Cycle Modes: Press the power switch repeatedly to cycle through the six available modes: HIGH → LOW → AREA HIGH → AREA LOW → RED → RED FLASH.
3. To Turn Off: After cycling through all modes, pressing the switch one more time will turn the light off. Alternatively, if the light has been in a single mode for several seconds, pressing the switch will turn it off directly.

Using the 90° Rotating Head

The head of the work light can pivot up to 90 degrees, allowing you to direct the light precisely where needed.

• Grasp the body of the light firmly with one hand and the head with the other.
• Gently rotate the head to the desired angle. The head will click into place at various positions to maintain the chosen angle.

Image: The work light demonstrating its 90-degree rotating head feature.

Utilizing the Magnetic Base

The strong magnet integrated into the base of the light allows for convenient hands-free operation by attaching it to any ferrous metal surface.

• Ensure the metal surface is clean and free of debris for optimal magnetic adhesion.
• Place the magnetic base firmly against the metal surface. The light will hold securely, allowing you to work without holding the flashlight.

Image: The work light securely attached to a metal rack using its magnetic base, providing hands-free illumination.

Using the Metal Pocket Clip

The integrated metal pocket clip provides another option for hands-free lighting, particularly for right-angle illumination.

• Attach the clip to a pocket, belt, or other suitable edge on your clothing or gear.
• Adjust the rotating head to direct the light beam as needed.

Image: Back view of the work light, clearly showing the durable metal pocket clip.

Maintenance

Cleaning

• Wipe the exterior of the work light with a soft, dry cloth.
• Do not use abrasive cleaners or solvents, as they may damage the finish or internal components.
• Do not immerse the light in water or any other liquid.

Storage

• Store the work light in a cool, dry place away from direct sunlight and extreme temperatures.
• For long-term storage, it is recommended to charge the battery every 3-6 months to maintain its health.

Troubleshooting

Specifications

Image: Product packaging displaying key features and a performance table for different light modes.

Warranty and Support

Warranty information for the Hyper Tough 300-LUMEN Rechargeable LED Work Light is not provided within this manual. For details regarding warranty coverage, returns, or technical support, please refer to the product packaging, the official Hyper Tough website, or contact the retailer where the product was purchased.